Adams Rite 4036-01-01-313, 4036-01-01-335, 4036-01-01-628, 4036-01-02-313, 4036-01-02-335 Specsheet

CYLINDERS

4036 Mortise Cylinder
4066 Thumbturn

4036 MORTISE CYLINDER 4066 THUMBTURN

4066 Thumbturn Function

To operate lock or latch without key. Interchanges with
standard 1-5/32" diameter mortise cylinder. Cams are available
to suit the particular Adams Rite lock or latch. (See back for
cam specifications.)

C-3

ANSI/BHMA 156.5–2010 E 19211

The 4036 Mortise Cylinder provides five-pin security with
most Adams Rite locks or latches. The 4066 Thumbturn
operates locks or latches without a key.

4036 Mortise Cylinder Function

A standard 1" long, 1-5/32" diameter cylinder with five-pin tumbler security.
Designed to operate any Adams Rite lock or latch requiring a mortise cylinder.
Close-tolerance manufacture and inspection achieve setscrew grooves and cam
that are true on their respective centerlines. This ensures proper mating and
operation with the lock or latch mechanism.

4036 Specifications

MORTISE CYLINDER SHELL

• Aluminum scalp with US28 Clear Anodized (628) or 313 (Dark Bronze

Anodized) or 335 (Black Anodized). Plug is US26 Chrome (625).

MORTISE CYLINDER KEYING

• Available in keyed-alike pairs (KA2), keyed-different (KD), and keyed-alike

sets of 50 (KA50). All cylinders furnished with two keys per cylinder.

MORTISE CYLINDER TRIM RING

• Furnished. 1/4" thick, suitable for 1-3/4" thick doors. Available by special

order for other door thicknesses.

4066 Specifications

THUMBTURN SHELL

• Choice of three finishes: 130 to match Clear Anodized,

313 (Dark Bronze Anodized) or 335 (Black Anodized).

THUMBTURN TRIM RING

• Furnished. 1/4" thick, suitable for 1-3/4" thick doors.

Available by special order for other door thicknesses.

Specifications

STA ND AR D PACK AGE

• Individually packed with trim ring. 4036 also furnished

with keys.

4066

4036

ARM-014-9/14

800.872.3267 • Fax [phone]

10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044

www.adamsrite.com

C-4

All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.

4036 MORTISE CYLINDER 4066 THUMBTURN

CYLINDERS

Dimensions

THIS CAM AVAILABLE FROM:

ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE

.721"

18.3mm

EXIT

TRIM

1830
MS1837
MS1850S
MS1850SN
MS1861
1875
MS+1890
MS1950
2190
2290

4300
4510
4530
4900
4920AN

8300
8400
8650

1870
1870HM
1877
4781

3080
3090

-01

.120"

R

3.0mm

-02 -03

DIMENSIONS OF CAM TO OPERATE:

DEADLOCK

SERIES

DEADLATCH

SERIES

DEVICES

FLUSHBOLTS

.182"

4.6mm

DIM “A”

.800" ± .005"

20.3mm ± .127mm

DIMENSIONS OF CAM

TO OPERATE:

4070 SERIES DEADBOLT

THIS CAM AVAILABLE

FROM ABOVE CYLINDER

MANUFACTURERS

ON SPECIAL ORDER

(OR MAKE FROM
STANDARD CAM)

.620"

15.7mm

.850" ± .005"

21.6mm ± .127mm

R

.334"

8.5mm

Cylinders “By Others”

Adams Rite deadlocks and latches are designed
to accept standard 1-5/32" mortise cylinders of all
popular makes. This means that the entrance can
be keyed to match the system used throughout
the building on other types of doors. Care must
be taken, however, to specify the proper cam
for each type of lock, as these are not generally
interchangeable. The cam shapes shown below
are available from the listed cylinder manufacturers
and will be supplied by them with the cylinder
when specified or available separately. Because
of variations in the attachment of cams to cylinders
and other construction differences, it is advisable
NOT to attempt using one manufacturer’s cylinder
with another’s cam.

R

.334"

8.5mm

DIMENSIONS OF CAM

TO OPERATE:

2331 DEADBOLT

THIS CAM AVAILABLE
FROM ALL CYLINDER

.950"

24.1mm

MANUFACTURERS

(STANDARD CAM)

CYLINDER

TRIM RING

DOOR STILE

TR

CYLINDER TRIM RING FOR NARROW STILES

Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be

A

B

simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly

LOCK CASE

CAM

DOOR CENTERLINE

HOW TO ORDER 4036 MORTISE CYLINDER

Specify quantity and the following information.
Order related products separately.

PRODUCT NO. LOCK TY PE KEY OPTIONS FINISH

4036 -01 -01 -628

01 For MS Lock, 4900

Deadlatches, 2190, etc.

02 For 4070 Deadlock 02 KA2 335 Black Anodized

03 For 2331 Deadlock 50 Set 50 keyed alike 628 Clear Anodized

01 KD 313 Dark Bronze Anodized

determined by the following formula:

FOR MS®LOCKS: FOR 4500 SERIES LATCHES:

TR* = A + .125

– B

TR* = A + .132

*TOLERANCE: ± .060

FOR 2190 TR* = A - B

HOW TO ORDER 4066 THUMBTURN

Specify quantity and the following information.
Order related products separately.

PRODUCT NO. LOCK TYPE FINISH

4066 -01 -130

“TR” is trim ring length.

A

” is cylinder height (less shoulder but including cam).

– B

“

B

” is one-half of door thickness.

“

01 For MS Lock, 4900

Deadlatches, 2190, etc

130 To match 628

02 For 4070 Deadlock 313 Dark Bronze Anodized

03 For 2331 Deadlock 335 Black Anodized

Clear Anodized

DIMENSIONS OF CAM TO OPER ATE THE FOLLOWING ADAMS RITE PRODUCTS:

Deadlocks Deadlatches Flushbolts Exit Devices Trim

1830, MS1837, MS1850S(-050), MS1850SN(-050),
MS1861, 1875, MS+1890, MS1950(-050), 2190, 2290

4300, 4510, 4530,
4900, 4920AN

1870, 1870HM,
1877, 4781 w/8650

8300, 8400, 8600
w/8650

3080, 3090

©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.