Adams Rite 4024-06-01-130, 4025-00-01-130, 4025-06-01-119, 4025-06-01-121, 4025-06-01-130 Specsheet
...
CYLINDERS
4024, 4025, 4026
Cylinder Pulls
ANSI/BHMA 156.5–2010 E 19231
The 4024, 4025, 4026 Cylinder Pulls are designed to
operate Adams Rite MS1847 Deadlocks and the 5017
Wood Door Deadlock.
Function
Designed for use with Adams Rite MS1847 Deadlocks and 5017 Wood Door
Deadlock, these surface mounted pulls allow a sliding glass door to be keyed-in
with other types of doors which have key-in-knob or mortise cylinder locks.
4024 , 4025, 4026 CYLINDER PULLS
4024 Cylinder Pull
The 4024 five pin tumbler cylinder is smaller than the 4025
Cylinder Pull and it is symmetrical, designed for mounting door
pull or other trim plate. Can be mounted directly on stile where
lock mechanism is mounted on inside surface of stile rather
than mortised.
4025 Cylinder Pull
The 4025 five pin tumbler cylinder has mounting holes spaced
to allow clearance around MS1847 Deadlock mechanism for
long through-the-stile mounting screws.
4026 Cylinder Pull
A five pin tumbler cylinder, the 4026 Cylinder Pull is
designed for use with 5017 Wood Door Deadlock for wood
door applications.
Specifications
TRIM FINISH
• Zinc alloy housing. Standard finish: 130.
Cylinders are brass.
C-1
4025
CYLINDER BOTH SIDES
• A pair of 4025 Cylinder Pulls can be mounted opposite
each other with long machine screws. Security is
maintained since each side offers access to only one
screwhead. Both screws would have to be removed to
operate the lock without its key. Specify 4025 CYLxCYL set.
OPTIONS
• CYLINDER MAKE: Pulls available with Schlage or Weiser
Keyway cylinders.
4024
4025
CYL X CYL
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
C-2
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4024 , 4025, 4026 CYLINDER PULLS
Dimensions Stile Preparation
For 4025 mounted directly on stile by two through-screws.
CYLINDERS
4024
4025
1-7/32"
31mm
1-7/32"
31.0mm
SPINDLE
2-1/4"
57.2mm
1-61/64"
2-29/32"
73.8mm
31/32"
24.6mm
49.6mm
TAP 6-32
(2 PLCS.)
7/16"
11.1mm
2"
50.8mm
19.1
3/4"
2-35/64"
mm
MS1847
LOCK
1/8"
3.2mm
22.2
7/8"
mm
1/8"
3.2mm
10-32
TAP
(4 PLCS.)
Installation
FOR 4025
64.7mm
2"
50.8mm
3/8"
DIA.
9.5mm
DRILL AND CSK FOR 2
#10-32 THRU SCREWS
SPINDLE
*4026, like 4025 but with mounting holes on centerline
for use with 5017 lock available on high quantity order.
2-35/64"
64.7mm
3/4"
19.1mm
HOW TO ORDER 4024, 4025 CYLINDER PULLS
Specify quantity and the following information. Order related products separately.
PULL TYPE PULL NO./CYLINDER INCLUDED FINISH
4024 -05 -130
4024 Trim Plate Mounted 05 Schlage "C: Keyway 119 To match 335 Black Anodized
4025 Stile Mounted with through - screws 06 Weiser Keyway 121 To match 313 Dark Bronze Anodized
4026 For Wood Applications 130 To match 628 Clear Anodized
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock.
5017 Wood Door Deadlock (4026 only).
FOR 4024 ON
DOOR PULL
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...