E82111
ACCESSORIES
4016 Header Bolt
ALUMINUM
GRADE 1
4016 HEADER BOLT
Operation
360° turn of key or thumbturn in basic MS® deadlock throws
counterbalanced bolt into opposite door and hexagonal bolt into
header strike. Key can be removed only when bolts are in a
positively locked or unlocked position.
Specifications
DOOR/CYLINDER HEIGHT
• The standard version is designed for a 7’ door height with
cylinder height as low as 35". Added extension for up to a
10’ door available when ordering.
HEADER BOLT
• Hexagonal 3/8" flat to flat. Made of stainless steel.
A-5
Security for pairs of doors with single key turning is
possible with the 4016 Header Bolt. The three-point lock
easily secures the entire double door entrance when
®
working in conjunction with an MS
Deadlock.
Function
Adding the 4016 Header Bolt and the 4015 Threshold Bolt to a pivoted bolt MS®
deadlock allows Maximum Security for pairs of doors by the turn of a single
key. Simultaneously extending the stainless steel hexbolts top and bottom and
pivoting the massive MS® bolt into the mating stile, the three-point lock secures
the entire double door entrance. The 4016 Header Bolt can be added to any
basic MS1850S, MS1850SN, MS1950 or for two-points top and bottom use with
1870/1870HM Cylinder-Operated Flushbolt. Not applicable to 7/8" backset locks.
4005
BO LT
GUIDE
STRIKE
ADJUSTMENT
• Exact adjustment of threaded rod to door height is locked
in place by hexagonal header bolt.
STRIKE
• For header bolt, a 1/2" diameter hole in metal frame
is suitable or, for non-metal installation, 4005 strike is
available.
STA NDA R D PACKAG E
• Packed separately with bolt guide, screws, and
attachment pin. Shipping weight: 1 lb.
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
A-6
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4016 HEADER BOLT
ACCESSORIES
Dimensions
11/16"
17.5mm
1-13/32"
35.7
MS1851S LOCK
THROW
mm
4016-20
SHOWN
WITH
15.6
9/32"
7.1mm
5/8"
mm
BOLT
PROJECTION
TOP OF DOOR
4-3/4"
120.7
mm
SHOWN
EXTENDED
Installation
CUT TO
SUIT
CYLINDER
HEIGHT
4016-30 FOR
1-1/8" BACKSET
INSTALL ADAPTOR ARM TO LOCK FROM TOP WITH
BOLT RETRACTED AS SHOWN. INSTALL PIN THROUGH
SLOTS IN LOCK SIDE PLATES, PASSING THROUGH
HOLES IN BOTH SIDES OF THE ADAPTOR ARM.
4016-20 FOR
31/32" BACKSET
4016-10 FOR
1-1/2" BACKSET
Stile preparation
DUE TO THE VARIETY OF CONSTRUCTION METHODS
EMPLOYED BY EACH DOOR MANUFACTURER,
CONSULT FACTORY FOR GUIDANCE IN SPECIAL
PREPARATION AND INSTALLATION REQUIREMENTS.
ANY BASIC
®
MS
DEADBOLT OR
1870 FLUSHBOLT
4016 HEADER BOLT
Specify quantity and the following information. Order related products separately.
LOCK BACKSET DOOR HEIGHT
4016 -30 -01
10 1-1/ 2" 01 7' Door
20 31/32 " 02 10' Door
30 1-1/ 8"
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the
following related products, available separately:
Accessories Deadlocks Flushbolts
4015 Threshold Bolt, 4085 Header Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050)
This product is compatible with the following products:
Not applicable to 7/8" backset locks.
1870, 1870HM Cylinder-Operated Flushbolt.
Not applicable to 7/8" backset locks.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...