Adams Rite 3600M36-32DMEC, 3600M36-US32D-MEC, 3600SE30-32DMEC, 3600SE36-32DMEC, 3600SE36-US32D Brochure

Adams Rite
8000|3000 Series
Exit Devices

Full line of life-safety & fire-rated
exit devices & related hardware

Every Adams Rite exit device we manufacture combines our
patented hardware with the slim, clean lines of our extruded
aluminum pushbar. This gives designers and specifiers flexibility
in application, while maintaining consistency in appearance. An
extensive range of options and finishes assures that you get
exactly the exit device you want, to fit all your requirements.

All Adams Rite exit devices fully meet building codes and ADA guidelines for accessibility and
clearance. Activation of the locking hardware is smooth and reliable, while the low-profile pushbar
reduces wear and maintenance. For fire doors, our 3000 Series are rated up to 3 hours.

Adams Rite 8000 Series Exit Devices oer a rounded product range with mechanical and electrified
options to suit any application earning the reputation as the best value in the industry.

adamsrite.com/exits

Exit Device Models

8200 8100|3100

SVR

8400 8300|3300

Mortise

Designed for applications that
require a fire-rated (3100) or
life-safety (8100, 8200) exit
device with surface vertical
rods for two-point locking.

Surface installed rods are
easy to install and may
be more cost ecient.

Designed for applications
that require a fire-rated
(3300) or life-safety (8300,

8400) exit device with
mortise locking solution.

⊲ Patented top latching mechanism utilizes a

rotating top bolt which dead latches around the
header strike, ensures interlocking between the
door and the frame for high level of security

⊲ Adjustable steel rods protected in contoured covers

⊲ Available with top and bottom rod, or top rod only

CERTIFICATES

• UL 305 Panic Hardware

• 3100 Only UL 10(c ) f ire-rate d up
to 3 hours for non “ T” product

• C AN/ULC S10 4 fire door conformant

• N FPA 252 fire door con formant

⊲ Heavy duty deadlatching mechanism

3100

– up to 3 hour s for

non “T” product

for high level of security

⊲ Easy to install design for use in single door applications

or most typically on the active leaf of a pair of doors.

⊲ Standard strike of stainless steel included.

⊲ Fits standard cutouts used for the Adams

Rite 4900 Heavy Duty Deadlatch on
narrow stile aluminum doors (8400)

CERTIFICATES

• UL 305 Panic Hardware

• 3 300 Only: UL 10(b)

• U L 10(c ) f ire-rated up to 3 hour s, CAN/
ULC S104 f ire door conformant

• N FPA 252 fire door co nform ant

3300

– up to 3 hour s

8500|3600 8600

CVR

Designed for applications that
require a fire-rated (3600) or
life-safety (8500, 8600) exit
device with concealed vertical
rods for two-point locking.

Concealed rods provide a
more aesthetic look and
increased rod durability than
surface mounted rods.

⊲ Patented top latching mechanism utilizes a

rotating top bolt which dead latches around the
header strike, ensures interlocking between the
door and the frame for high level of security

⊲ Adjustable steel rods protected in contoured covers

⊲ Available with top and bottom rod, or top rod only

⊲ Easy to install design for use in applications

with single doors or pairs of doors

CERTIFICATES

• UL 305 Panic Hardware

• 360 0 Only: UL 10(c ) fire -rated up to 3 hours

• C AN/ULC S10 4 fire door conformant

• N FPA 252 fire door con formant

3100

– up to 3 hour s for

non “T” product

12

8800 8700|3700

Designed for applications
that require a fire-rated
(3700) or life-safety (8700,

8800) exit device with a
surface-mounted strike.

⊲ Unique patented Starwheel bolt interlocks door to frame for

enhanced strength and durability and to prevent jamb spreading

⊲ Easy to install design for use in applications with

single doors or pairs of doors with a mullion

Rim

SCVR

8900|3900

8099

Designed for applications
that require a fire-rated
(3900) or life-safety (8900)
exit device with concealed
vertical top rod and
surface concealed actuator
single-point latching in
header. For wood doors.

Designed for applications
that do not require a
latching/locking life­safety exit device. Often
used with maglock or
other locking device.

CERTIFICATES

• UL 305 Panic Hardware

• 3700 Onl y: UL 10(c ) f ire-rat ed up to 3 hou rs

• C AN/ULC S10 4 fire door conformant

• N FPA 252 fire door con formant

⊲ Patented top latching mechanism utilizes a rotating top bolt

3700

– up to 3 hour s

which dead latches around the header strike, ensures interlocking
between the door and the frame for high level of security

⊲ Adjustable protected steel rods

⊲ Innovative top rod only design makes preparation

easier and reduces maintenance.

⊲ Easy to install design for use in applications

with single doors or pairs of doors

CERTIFICATES

• UL 305 Panic Hardware

• 3900 Only : UL 10(c ) fire -rated u p to 1-1/2 hours

• C AN/ULC S10 4 fire door conformant

• N FPA 252 fire door con formant

⊲ No latch mechanism but with either single or dual monitor/

3700

– up to 3 hour s

signal switches. Dual switch version allows redundancy
where required by code or the operation of a signal device.

⊲ Designed for applications with single or pairs of doors.

Dummy

Starwheel Bolt

1. When door closes, the interlocking noseguard and
Starwheel bolt close around the strike. The deadlocking
slide springs over, locking the Starwheel bolt to the strike.

2. When push bar is depressed, the deadlocking slide moves
back, allowing the door to unlock from the strike. This unique
interlock provides solid security and prevents jamb spreading.

Options & Accessories

The entire line of Adams Rite Exit Devices can be ordered with electrification options for standalone access control or integration with maglocks,
card readers, keypads, fire alarms and other control systems. Dierent exit device types have dierent installation and power requirements.

Electrified Options

The Motorized Latch Retraction option incorporates a powerful and ecient motor to unlatch the exit device.
Motor-powered latch retraction provides a quieter operation than solenoid options. Adams Rite recommends

Motorized Latch
Retraction

(Specify MLR
when ordering)

Electric Latch
Retraction

(Specify EL or LR
when ordering)

that for optimal performance all exit devices with MLR option be paired with PS-SE Power Supplies.

• Available on all 3000/8000 Series

• No calibration required during installation

• Robust linkage mechanism
for extended operation

• Motor-driven latch and bar retraction

• Available for 30" – 48" doors

The EL option for rim exit devices and LR option for all other non-rim devices uses a solenoid mounted in the pushbar
for instantaneous unlocking and locking of the exit device from a remote location or access control device.

• Available on all 3000/8000 Series

• Solenoid-driven latch retraction

• Available for 30" – 48" doors

• 850 mA during retraction and 370 mA
maintained in dogged hold position

• Requires 2 A at 24 VDC regulated/
filtered power supply

• Continuous or intermittent use

• LR  16 mA in rush during retraction and

500 mA in dogged hold position

• EL  Requires 1.5 A at 12 VDC

and 600 mA at 24 VDC

• Continuous or intermittent use

• Configured for fail-secure. In the event
of a power failure, the exit device
defaults to latched condition

• Available for panic and fire exit hardware

• Compatible with REX monitoring

• Configured for fail-secure. In the event
of a power failure, the exit device
defaults to latched condition

• Available for panic and fire exit hardware

• Compatible with REX monitoring

Electric Dogging

Alarmed Exit
Device

A holding magnet keeps the pushbar depressed once it is set manually, and keeps the latch
retracted for lower profile exit devices, resulting in less damage and quieter operation.

Suitable for all Adams Rite exit devices 36” wide or greater. This battery-operated alarm option emits a loud 95 decibel alarm
to notify management of unauthorized exit. Minimum opening width of 36”. Cannot be ordered with other exit device options.

Mechanical Options

Monitoring/
Signal Switch

Cylinder Dogging

Matching
End Caps

California 5#

(Coming soon)

Mounted in the exit device pushbar on the hinge end, switches can be used
to activate signal light, horn, monitor, or other devices.

For management control of dogging exit devices, for use with life-safety exit devices only.

For applications where it is preferable that the end caps match the finish of the exit device. Available for US finishes only.

Compliant to 2016 California Building Code 1010.1.3. Available for the following configurations only:

• 8500 CVR for Hollow Metal

• 8600 CVR for Aluminum

• 8700 Rim for Wood or Hollow Metal

• 8800 Rim for Aluminum

NOTE: Cy linder and Ele ctric Dogg ing not availa ble for 3000 fire-rated ser ies.

Compatible Products

Trim

3080 Series Entry Trim

Provides outside activation for

doors with any type of Adams Rite

exit device. The locked handle

is protected from vandalism and

forced entry with a breakaway

clutching mechanism.

3090 eForce®

Keyless Entry

Battery-operated access control

for Adams Rite deadlocks,

deadlatches, and exit devices

for aluminum, hollow metal

and wood door applications

not requiring audit trail.

PS1 Power Supply

One Amp linear power supply

compatible with 8800, 8700

Rim Exit Devices with EL

latch retraction option.

Power

Fixed Pulls

3001, 3002 Fixed Pulls

US32D (630) Satin Stainless
Steel pulls for hollow metal
and wood doors only.

PS-LR Power Supply

Linear power supply for 8000
and 3000 Series vertical rod
and mortise type exit devices
with LR latch retraction option.

Electric Strikes

7100 Series, 7400

Ultraline® Series (Preload

Capable) Electric Strikes

Compatible with 8300, 8400

Series Mortise Exit Devices

7200 Fire-Rated

Electric Strike

Compatible with fire-rated 3300

Series Mortise Exit Devices

7800 Electric Strike

Compatible with 8700, 8800

Series Rim Exit Devices

Power Accessories

4612 Power

Transfer

4605
Transformer

PS-SE Power Supply

Power supply for all 8000

and 3000 Series Exit Devices

with Motorized Latch

Retraction (MLR) option.

4603 Rectifier

USA

800.872.3267 | f: 800.232.7329
adamsrite.com/exits

[e-mail]

[e-mail]

@AdamsRite AdamsRiteMfg Adams Rite

Patent pending and/or patent www.assaabloydss.com/patents.

Copyright © 2019, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reser ved. Reproduc tion in

whole or in part without the express written permission of Hanchett Entr y Systems, Inc. is prohibited. AR-049-0919

800.461.3007 | f. 800.461.8989

[e-mail]

Canada

assaabloydss.ca

[e-mail]