Adams Rite 3100-30-US32, 3100-36-32DMEC, 3100-36-US3, 3100-36-US32, 3100-36-US32D Specsheet

EXIT DEVICES

BHMA TYPE 2

Surface Vertical
Rod Exit Device

For Wood & Hollow Steel Doors

3100 Series

FIRE-RATED

81 00 Series

LIFE-SAFETY

ED-1

CERTIFICATIONS:

8100 SERIES:

U

Life-Safety Listing

L

®

ANSI/BHMA A156.3 Grade 1
California State Fire Marshall
New York City MEA*

*Consult factory for specific number

Top Rod Only version

3100 SERIES:

U

10C Fire Label, up to 3 hrs.

L

®

California State Fire Marshall
New York City MEA*
Warnock/Hersey Listing**

**See Chart on next page for ratings

available in a

Also

260 Santa Fe Street
Pomona, California 91767
() ()

800 872-3267 Fax: [phone]

www.adamsrite.com

Features:

Patented top latching
mechanism interlocks door
to frame

Adjustable steel rods protected
in contoured covers

Pushbar clad or anodized, not
plated, in a variety of finishes

Easy to install

Clean, unobtrusive design

Strong, durable construction
for a high level of security

Features & Dimensions

Surface Vertical Rod Exit Device

ANSI/BHMA

Grade 1

Handing

Device is non-handed. Lever Entry Trim
is field reversible.

Pushbar Length

Standard Sizes: Dimensioned for 30",
36", 42" & 48" openings. Standard
width bars can be field cut to the
next smallest opening width.

Bar Height

Standard model adjusts from 30" to 44".

Door Height

Standard model fits up to 8ft. door,

with
bar height at 40" - 44". For doors up to
10ft., order Tall Door Kit:
8055 for 8100, 3055 for 3100

Door Thickness

Suits 1-3/4" standard, up to 2-1/4".

Projection

2-15/16" when fully projected,
1-15/16" when dogged.

Materials

Pushbar made of extruded aluminum,
clad or anodized in a variety of finishes.

Stile Width

3100

- Minimum 3-3/4"*

8100 - Minimum 3-3/4"

*Door construction may require additional
stile width to meet fire ratings and provide
adequate strength.

Dogging

Standard dogging with hex key or cylinder
dogging for 8100 Series only. Electric dogging
also available for 3100 and 8100 Series.
.

Fasteners

Standard self-tapping screws. Optional Sex
Bolt Kits- 26-0584 (2 required per device)
Specify finish.

Strike

Made of hardened steel. Supplied with device.

Cylinders (order

separately)

Cylinder x Fixed Pull: (Function 03)
Accepts any standard Rim cylinder.

Entry Lever or Thumbturn:
(Functions 08, 09, 11, 12)

Accepts any standard diameter Mortise
cylinder with MS cam. Accommodates

®

cylinder lengths from 1" to 1-1/4".

Warranty

Five

year limited.

AVAILABLE FINISHES

313

335

628

US3

US4

US9

US10

10B

Dark Bronze Anod.

Black Anodized

Clear Anodized

Bright Brass

Satin Brass

Bright Bronze

Satin Bronze

Dark Bronze
(Trim only)

US32

Bright Stainless

US32D

Satin Stainless

Consult factory for

special finishes.

Bolts and Strikes

Top
Bolt

Top

Strike

The patented top latching mechanism utilizes
a rotating Top Bolt which deadlatches around
the Header Strike, interlocking the door to the
frame. For wood frames, an additional plate is
supplied for securing the Header Strike. The
hexagonal, hardened steel Bottom Bolt is
shielded in a cast housing for strength and
stability.

Fire ratings for different Models, Door Construction and Door Size

MODEL

3100

3100W

3100T

TYPE

SVR

SVR-TRO

SVR-TRO

RATING

3 Hr.

1-1/2 Hr.

3 Hr.

Plate for wood

frames is furnished

with 8100

DOOR

CONSTR.

Hollow Metal

or Wood

Wood

Hollow Metal

MAX. SIZE

SINGLE
DOORS

4'0"x 10'0"

(

Wood Door only

4'0" x 8'0"

NA

Bottom

Bolt

Reverse

view

MAX. SIZE

PAIRS, DBL.

EGRESS

8'0" x 10'0 "

)

8'0" x 8'0"

8'0" x 10' 0"

Pushbar Dimensions

2-15/16

2-7/16

Fully Projected Dogged

Top Rod Only

The Surface Vertical Rod
exit device is also available
with a single vertical rod
on top.

Specify by adding "T"
after exit device
number.

1-15/16

Trim & Function

Surface Vertical Rod Exit Device

ANSI/BHMA Functions:

01 02 03 08

PULL ONLY

WHEN DOGGED

DUMMY TRIM

EXIT

ONLY-

NO TRIM

N/A N/A N/A

KEY RETRACTS

LATCHBOLT

NL

RIM

KEY LOCKS

LEVER

CYLINDER TYPE

MORTISE MORTISE MORTISE MORTISE

09 11 12 14

KEY LOCKS

KEY LOCKS

LEVER

KEY LOCKS

THUMBTURN

THUMBTURN

NL NL

8100 ONLY 8100 ONLY

KEY LOCKS

THUMBTURN

NL

PAS SAGE SET

-- Night Latch

Clutch Lever Entry Trim

1.9

3.25

5.00

Modern
Model
3081

T ubular
Model
3082

T raditional
Model
3083

8.10

1.9

3.45

4.55

8.10

1.9

2.91

4.35

8.10

Fixed Pulls

()

US32 only

11.50

2.75

2.31

T ubular

Model 3001

11.50

2.75

2.03

Flat

Model 3002

Thumbturn

5.81

1.63

1.63

Model 8066

Rim Cylinder

8736

Standard five-pin unit with spindle to
suit Surface Vertical Rod exit devices. All
brass with same choices of keying as
Mortise cylinder. Available in finishes
628, 313 or 335. Any other make
standard Rim cylinder can be used to
key in with existing systems. Note that if
entry trim is specified

for cylinder use,
the cylinder must be Mortise type,
regardless of exit device.

Mortise Cylinder

4036-01

Standard diameter five-pin unit with

®

MS cam, suitable for use with Entry
Trim. All brass construction with front
"scalp" available in finishes 628, 313
and 335. Available in quantity all keyed
different (KD), in pairs (KA2) or fifty alike
(KA50). Any other make standard
Mortise cylinder with MS cam can be
used to "key in"

with existing systems.

®

Options & Accessories

Surface Vertical Rod Exit Device

Order by adding suffix to Exit Device in place of hyphen or by separate model number.

MONITOR/SIGNAL SWITCH

M1 - Single Switch
M2 - Dual Switch

A switch in the exit device pushbar
mounted on the hinge end.
Switch can be used to activate
signal light, horn, monitor or other

For all
Adams Rite
Exit Devices

open or normally closed depending upon application. Can be
retrofit in field to existing exit device. Dual switch version offers
redundancy as required by some building codes or the option of
operating a second signaling device.

Specify by adding "M1"or "M2" after exit device model number.

Monitor Kits for upgrading any 3000 or 8000 Series device:
91-0897-01 - Single Switch 91-0897-02 - Dual Switch

devices. Most common
application is to release maglock
when pushbar is depressed.
Switch can be wired for normally

ELECTRIC LATCH RETRACTION

The LR option uses a

solenoid mounted in

pushbar for instantaneous

unlocking and locking of the exit

device from a remote location or access

control device. Because electrical operation of

device is fail-secure, this option can be used on fire-

rated as well as life-safety applications. In the event of a

of PS-LR Power Supply, which will power two exit devices.
(Using an alternate to the PS-LR Power Supply will void warranty).

Specify by adding "LR" after exit device model number. Order
PS-LR Power Supply separately. Order Battery Backup Kit
separately (BBK-LR).

Solenoid Specifications:

16 Amps Inrush/.5 Amps Hold
Solenoids are rated for both intermittent and continuous operation.
Also see 4612 Power Transfer.

power failure device automatically relatches. Requires the use

MONITORED DUMMY PUSHBAR

8099M1 - Single Switch

8099M2 - Dual Switch

8099-00 - Dummy Only

Dummy pushbar with no latch mechanism but with either a single
or dual monitor/signal switch. Most common application is in
conjunction with a maglock where bar is used to turn off magnet
and allow exit from building. Dual switch version allows redundancy
where required by code or the operation of a
with maglock. Specify door type and width when ordering.
Available in all exit device finishes.
The 8099-00 is also available as a non-operating dummy for doors
not requiring an exit device, but where matching trim is desired.
Specify door type, opening width and finish to be matched.

signal device along

ALARMED EXIT DEVICE

Exit Devices

This option emits a loud alarm to notify management of
unauthorized exit. Will not alter the Life-Safety characteristics of the
exit device in any way. Control of the alarm is by use of a key in any
standard Mortise cylinder with MS cam to arm, disarm, delay or
reset the alarm. Red letters on the bar give a “hands off” warning to
deter accidental actuation.

Battery Operated Alarm

Four AA alkaline batteries power a horn to create a piercing 95
decibel noise for two minutes (or until disarmed) when pushbar is
depressed.

Hardwired Alarm

Can be connected to external horn for louder or remote signal.
Remote monitor LED light can also be wired in, as can a door
position proximity switch. Also accommodates an external delay
switch, such as an outside key switch or pad,
entry. Uses rechargeable nicad batteries connected to 12-24 Volt
AC or DC source. Each bar has its own battery backup system.

Minimum opening width: 36"

Beeps to signal need for new batteries.

®

to allow authorized

CYLINDER DOGGING

For all non-fire rated
Adams Rite Exit Devices

For management control of
dogging. Any standard
15/16" to 1-1/8" long
Mortise cylinder with MS cam can be used in a pushbar prepared at
factory with Cylinder Dogging kit. Cannot be used with Alarm, EL or
LR options.

Specify by adding "C" after exit device model number.

®

ELECTRIC DOGGING

For all Adams Rite
Exit Devices

The "ED" option uses a
holding magnet to keep
the pushbar depressed
(set manually) and the latch retracted. This gives a lower profile exit
device, resulting in less damage and quieter operation. All "ED"
devices include an internal microswitch that signals when the bar is
held in the depr essed position, ideal
fire-rated devices, it must be wired through the fire alarm system. All
devices operate at 24VDC,drawing .6 amp, allowing them to operate
with a simple transformer and rectifier.

Note: N

with access control devices such as card reader or keypads.

Specify by adding "ED" after exit device model number (ex. 8 611 E D 36 ).

ot to be used as access control element. Specify "LR"

for automatic door operators. On

For all

Adams Rite

©2008 ADAMS RITE MANUFACTURING CO.