TRIM
eForce®-150
3090 Keyless Entry
ELECTRIFIED
PRODUCT
A battery-operated keyless entry control device, the
eForce-150 3090 Keyless Entry provides access control
for Adams Rite deadlocks, deadlatches, and exit devices.
EFORCE®-150 3090 KEYLESS ENTRY
Operation
In the standard mode of operation, a programmed 2 to
7-digit character followed by a star (*) key allows for one
entry when used with Adams Rite deadlatches or exit
devices. The MS Deadlocks must always be relocked
manually when used with the eForce 3090. Hold open time
is adjustable from 1 to 9 seconds.
Features
• Surface mounted with concealed fasteners
(1-3/4" to 2-1/4" door thickness)
• Non-handed with clutched lever protection
• Key override via mortise cylinder (1" to 1-1/2" length
• UV stable keypad material
• Full outdoor rating: temperature range from -31°F to 151°F
• Powered by 4 AA alkaline batteries; supports
®
with MS
(-35°C to 65°C) and 5-95% humidity (non-condensing)
60,000 activations
cam)
T-5
Function
The eForce 3090 Keyless Entry is a battery-operated keyless entry control
for Adams Rite deadlocks, deadlatches and exit devices, that is compatible
with aluminum stile, steel, and wood door applications. The device can
accommodate up to 150 users, including master, supervisor, and emergency
users plus two one-time codes. The eForce 3090 can operate in three
modes: Standard, Passage, and Lockout. All programming is accomplished
via the keypad. Device operation is confirmed by both a visual LED light
indicator and an audible sound generated by a piezo horn.
Specifications
HOUSING
• The sleek-looking 3090 eForce measures 1-3/4" wide x
15-3/8" high, with Satin Chrome (626) and Powdercoat
Dark Bronze (121) finishes.
HANDLE
• Clutch-protected cast zinc alloy, finished to match
housing, field selectable handing.
COMPATIBLE LOCKING DEVICES
• The 3090 eForce retrofits to Adams Rite MS® Deadlocks,
4500 and 4900 Deadlatches and 8000 Series Exit
Devices in 31/32" backsets and greater. Additionally, the
3090 eForce-150 is compatible with Yale 7200 Series
and Corbin Russwin ED4000 Series exit devices (check
model number for availability).
OPTIONS
• RSK-3090, Remote activation input cable
STA N DARD PACK AGE
• Individually boxed with installation instructions, manual, and
mounting hardware for metal door applications from 1-3/4"
to 2-1/4" thick. Shipping weight approximately 5.5 lbs.
ARM-014-9/14
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
T-6
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
EFORCE®-150 3090 KEYLESS ENTRY
DimensionsDimensions Stile Preparation
1-7/16"
36.5mm
3-7/8"
98.4mm
2"
50.8
mm
C
L
OF CYLINDER
PREP
5"
127mm
7-19/32"
192.9mm
15-3/8"
390.5mm
1/2"
12.7mm
TRIM
6-13/32"
162.7mm
1/4"
ø
4X
6.4
mm
ONE WALL ONLY
INSTALL RIVNUT
11-15/16"
303.2mm
Installation
1-3/4"
44.5mm
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS®
cam dimensioned as shown. Cylinders
“Dim A”
.800" ± .005"
20.3mm ± .127mm
with MS® cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
.120"
3.0mm
R
.182"
4.6mm
thumbturn and trim ring information.
HOW TO ORDER EFORCE®-150 3090 KEYLESS ENTRY
Specify quantity and the following information. Order related products separately.
PRODUCT NO. COMPATIBLE PRODUCTS FINISH
3090 -01 -626
01 Adams Rite latches or 8000 Series Exit Devices, Yale 720 0 series, Corbin
Russwin ED4000 series exit devices only
02 Adams Rite MS® deadlocks 626 Satin Chrome
121 To match 313 Dark Bronze Anodized
7/8"
22.23mm
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
Accessories Cylinder Deadlocks Deadlatches Exit Devices
RSK-3090 Remote
Activation Kit.
Key override for the eForce
3090 by any standard 1-5/32"
diameter mortise cylinder with
MS® cam.
This product is compatible with the following products:
MS1850S(-050), MS1850SN(-050),
MS1950(-050).
4500 Series Standard
Duty Deadlatch.
4900 Series Heavy
Duty Deadlatch.
©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
Loading...