Adams Rite 3001-11-US32D, 3001-12-US32D, 3001-13-US32D, 3001-21-US32D, 3001-22-US32D Specsheet

ENTRY TRIM

EXIT DEVICES

ED -10

Standard

Designer

Handle

01

Series

Series

02
03
MD
ME
MG
MI
MJ
MN*
MV*
MW

3080

Entry Trim Ordering Matrix

0 No Handing
7 Right Hand*
8 Left Hand*

–

0 1

Handing

– 0 – 3 7 –

Cylinder Hole

3 With Hole
9 w/o Hole

M

Exit Device

1 SVR
3 Mortise
4 SCVR
6 CVR
7 RIM
U Universal Kit

Trim Cover Finish

– STD (Black)

M (Matching Finish)

US32D

Fixed Pull Ordering Matrix

Finish

US3 Bright Brass (605
US4 Satin Brass (606
US9 Bright Bronze**
US10 Satin Bronze**
10B Dark Bronze
US32 Bright Stainless (629
US32D Satin Stainless (630

* Handing must be specified for MV and MN Series

** US9 and US10 available on special order.
Consult factory for details.

)

)

)

)

DESIGNER HANDLES

3080- MV

3080- MG

3080- MD

3080- ME

3080- MN

3080- MW

3080- MJ

3080- MI

ED -10

Entry Trim

For all Adams Rite Exit Devices

STANDARD HANDLES*

308 0-01

3080-02

3080-03

Model/ Handle

3001 Round
3002 Flat

3001

Cylinder Hole

1 w/o Hole
2 with Hole

–

1 1

–

US32D

Exit Device

1 Mortise, Rim
2 CVR
3 SVR

Finish

US32D Satin Stainless

Thumbturn Ordering Matrix

Exit Device

00 Mortise or CVR
01 Rim or SVR

8066

07 Non-Rated CVR, SVR or LHR Mortise
08 Non-Rated Rim or RHR Mortise

–

01– 08 –US3

Door Hand

Only

Not for use with: 8200, 8400,

8475, 8600, 8675, 8800

Finish

US3 Bright Brass
US4 Satin Brass
US9 Bright Bronze
US10 Satin Bronze
10B Dark Bronze
US26 Bright Chrome
US26D Satin Chrome
628 Clear Anodized
313 Dark Bronze Anodized
335 Black Anodized

FIXED PULLS

THUMBTURN

3001 3002

3080 Series Entry Trim

The 3080 Series provides outside activation of
doors that have any type of Adams Rite Exit
Device. Breakaway clutching mechanism protects
the locked handle from vandalism or forced entry,
in either direction. All models share the same
core components, so handles can be changed
without having to replace the entire trim. Solid
construction meets Grade 1 standards.

*The 3080 -01, -02, and -03 lever handles are
designed to return within 1/2" of the door
face. Handles in the Designer Series do not
have this same feature. Please verify with local
code requirements to ensure compliance.

8066

3001 & 3002 Fixed Pulls

US32D Satin Stainless Steel pulls have 2-3/4" x
11-1/2" escutcheon. Order with or without cylinder
hole. For hollow metal and wood doors only.

8066 Thumbturn

Thumbturn and any standard mortise cyclinder
with MS cam allow entry control in two modes:
latched, but openable by thumbturn, or latched
with entry by key only with 8067 Nightlatch Kit.

©2009 Adams Ri te Manufac turing Co.

260 Santa Fe Street
Pomona, California 91767
[phone] Fax: [phone]
www.adamsrite.com

CYLINDER

ESCUTCHEON

SPACER

CYLINDER
RETAINER

RING

ROTATION

LIMITING

PINS

CYLINDER

C

L

.182

4.62

.800

20.32

.120 R

3.05

CAM TOLERANCE:

+

_
+

_

.13

.005

8.108.10

205.74

4.3125

109.54

1.91.9

48.26

3.6875

93.66

8.108.10

205.74

3.63.6

91.44

1.91.9

48.26

5.1255.125

130.18

8.108.10

205.74

3.71875

94.46

55

127

1.91.9

48.26

8.108.10

205.74

3.625

92.07

4.375

111.1

1.91.9

48.26

8.108.10

205.74

3.253.25

82.55

1.91.9

48.26

4.18754.1875

106.4

8.10

205.74

4

101.6

1.9

48.26

4.6875

119.06

8.10

205.74

3.625

92.08

1.9

48.26

4.5

114.3

1.9

48.26

3.25

82.55

8.10

205.74

5.00

127.00

1.9

48.26

3.45

87.63

8.10

205.74

4.55

115.57

1.9

48.26

2.91

73.91

8.10

205.74

4.35

110.49

8.108.10

205.74

3.313.31

84.14

1.91.9

48.26

4.906254.90625

124.6

2.75

69.85

11.50

292.10

2.31

58.67

2.75

69.85

2.03

51.56

11.50

292.10

1.63

41.40

1.63

41.40

5.81

147.57

Entry TrimEntry Trim

DIMENSIONS

INSTALLATION

Cylinder

Installation

CYLINDERS

Mortise Cylinder

4036-01

Standard diameter five-pin unit with MS® cam, suitable for use
with entry trim. All brass construction with front “scalp” available
in finishes 628, 313 and 335. Available in quantity all keyed
different (KD), in pairs (K A2) or fifty alike (KA50). Any other make
standard mortise cylinder with MS
with existing systems.

Cylinder Cam

®

cam can be used to “key in”

308 0-01*

3080-02*

INCHES

MILLIMETERS

3080-03*

3080- MD

Door Preparation and Trim Installation

Door prep and installation will differ depending on type of
exit device being used. Refer to Adams Rite Templates for
3080 Series Entry Trim preparation details.

©2009 Adams Ri te Manufac turing Co.

3080 Series Entry Trim can accept any standard 1-5/32” diameter
mortise cylinder with special MS
Cylinders with MS

®

cams can be readily obtained from most

®

cam dimensioned as shown.

cylinder manufacturers. See page SW-36 for cylinder make and
trim ring information.

OPTIONS

Can be ordered with or without a hole for cylinder. Order standard
mortise cylinder with MS

®

cam separately.

3080- ME

3080- MN

3001

*The 3080 -01, -02, and -03 lever handles are designed to return within 1/2" of the door face.
Handles in the Designer Series do not have this same feature. Please verify with local code requirements to ensure compliance.

3080- MG

3080- MV

3002

3080- MI

3080- MW

8066

3080- MJ