Adams Rite 2190-301-000, 2190-301-101-03, 2190-301-101-04, 2190-301-101-10B, 2190-301-101-32D Specsheet
...
E82102
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
DEADLOCKS
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
DL-27
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
Dual Force® 2190
Interconnected
Deadbolt/Deadlatch
ALUMINUM
The Dual Force 2190 Interconnected Deadbolt/Deadlatch
provides access control and security for aluminum stile
doors. Latch and deadbolt capabilities are combined for
fast, easy, and panic-proof exiting.
Function
The Dual Force 2190 combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt (and
deadlatch) from either side. The exterior lever retracts the latch only, while
the inside lever retracts the deadbolt and latch simultaneously for fast, easy,
panic-proof exiting. Intended for out-swinging doors.
ELECTRIFIED
OPTION
GRADE 1
Operation
Key or thumbturn retracts or extends deadbolt or deadlatch.
Inside lever retracts both when configured with interconnect
feature. Outside lever retracts latch only. Latch holdback feature
activated or deactivated by turning key to retract latch and sliding
holdback button on faceplate down to hold and up to release.
Specifications
INTER-CONNECTION
• Field-selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult local building
officials for guidance in code compliance. Retrofits to existing
MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same
backset. 1-3/4" minimum door thickness required.
CYLINDER BASKET
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT
• Latchbolt: 5/8" throw of solid brass. Easily reversible using
only a screwdriver. Deadbolt: 1" throw of stainless steel.
AUXILIARY DEADLATCH PIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPL ATES
• Measures 1" x 6-7/8". Include FaceStyle faceplate system
that adapts to flat, radius, or beveled door edge. Radius with
weatherseal faceplate available separately.
STRIKES
• Standard strike furnished is the 2101-01 for flat jamb where
door closes flush or nearly flush. The 2101 covers MS®
Deadlock strike preparation with modification, and the 4901
Deadlatch strike directly. Also available in radius version for
opposite stile pairs of doors and with extended lip strikes for
special jamb conditions.
CYLINDER CAM
• The Dual Force 2190 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from
most cylinder manufacturers. See CYLINDERS section for
cylinder make, thumbturn and trim ring information.
OPTIONS
• Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2290 for wood or steel door
version for stile and rail type door construction. Note that the
low profile trim (trim option 3) is recommended for in-swing
door applications. Please refer to 3080 (TRIM) for full offering
of designer handle sets.
ELECTRIFIED TRIM OPTIONS
• Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
STA N DAR D PACK AGE
• Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately. Shipping
weight: 2 lbs.
.800" ± .005"
“Dim A”
20.3mm ± .127mm
.120"
R
3.0mm
HOW TO ORDER DUAL FORCE
Specify quantity and the following information. Order related products separately.
.182"
4.6mm
®
2190 INTERCONNECTED DEADBOLT/DEADLATCH
CLUTCHED EXTERIOR
TRIM SET
ARM-014-9/14
STANDARD SERIES:
DESIGNER SERIES:
INTERIOR PASSAGE
LEVER SET
01-CURVE
MD MI
ME MJ
MG MN
02-ROUND
03-SQUARE
MV
MW
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
PRODUCT NO. BACKSET STRIKE FACEPL ATE FI NI SH TRIM HANDLE DESIGNATION TRIM AND HAND LE FINIS H
2190 -3 1 1 -1 01 32D
3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat
2 Radius Strike 3 Black Anodized 335
3 Flat/Center
Hung 4"
4 Flat/Center
Hun g 4-1/ 2"
Trim options 1 and 2 are for outswing doors only.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Electrification Accessories Cylinders
2190 Interconnected Deadbolt/Deadlatch can be electrified
in the field using the 2190 Electrification Kit (EK-2190) or it
can be ordered with electrified trim (trim option 2).
2 Dark Bronze
Anodized 313
1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 With Electrified
Tri m Set
3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
Extended lip strikes.
2190 thick door kits.
01 Curve 10B Dark Bronze (US10B)
03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
2190 Interconnected Deadbolt/Deadlatch
is operable by any standard 1-5/32”
diameter mortise cylinder with MS® cam.
DL-28
DUAL FORCE® 2190 INTERCONNECTED
DEADBOLT/DEADLATCH
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DEADLOCKS
Dimensions Stile Preparation
FOR CLUTCHED EXTERIOR
TRIM SET
BACKSET
L
L
L
CUTOUT SAME AS
MS1850S DEADBOLT
PLUS HOLES FOR
HANDLE MOUNTING
6-57/64"
175mm
1-1/64"
25.8mm
MAXIMUM GAP
DOOR TO JAMB:
1/8"
3.2mm
6-13/16"
173mm
63/64"
25mm
5-51/64"
147.2mm
2-1/8"
54mm
1-1/2"
38.1mm
1"
25.4mm
9/64"
3.6mm
1-23/64"
34.5mm
3/4"
19.1mm
5/8"
15.9mm
2-55/64"
72.6mm
11/16"
17.5mm
6-7/8"
174.6mm
HOW BACKSET
IS MEASURED:
CYLINDER
RADIUS
BEVEL
mm
mm
1" X 6-7/8"
C
L
FLAT
1-25/32"
45.2
2-1/4"
57. 2
1"
25.4mm
BACKSET “A”
1-1/8"
28.6
1-1/2"
38 .1
ARMORED FACEPLATE
FLAT 24- 0066- 01 (include d)
RADIUS 24-0066-02 (included)
C
C
C
mm
mm
1-1/4"
31.8mm
1-19/32"
40.5mm
4-13/64"
106.8mm
DIA.
Dimensions
INT.
EXT.
1-55/64"
47.2mm
OUTSIDE
3"
76.2mm
3"
76.2mm
2-11/16"
68.3mm
8-59/64"
226.6mm
1-9/64"
29mm
5"
127mm
INT.
EXT.
63/64"
25mm
3-3/16"
81mm
3-19/64"
83.7mm
2-11/16"
68.3mm
8-59/64"
226.6mm
INSIDE
1-23/64"
34.5mm
4-35/64"
115.5mm
INT.
EXT.
2-45/64"
68.7mm
2-51/64"
71mm
63/64"
2-15/32"
25mm
62.7mm
6-21/32"
169.1mm
LOW PROFILE TRIM
4-11/32"
110.3mm
1-23/64"
34.5mm
Jamb Preparation
4-41/64"
117.9mm
5-3/8"
136.5mm
37/64"
14.7mm
1-9/64"
29mm
15/64"
6mm
RADIUS W/ WEATHERSTRIP
C
CYLINDER
L
24-0066-03
Latch/Lock, Cylinder &
Level Installation
INT.
EXT.
3-1/4"
82.6mm
3-3/8"
85.7mm
2190 WITH MD LEVER
3-5/32"
INT.
80.2mm
3-5/16"
EXT.
84.1mm
2190 WITH 01 LEVER*
4-29/32"
124.6mm
4-3/8"
111.1mm
2190 WITH 02 LEVER* 2190 WITH 03 LEVER*
INT.
EXT.
3-7/32"
81.8mm
3-11/32"
84.9mm
4-5/16"
109.5mm
3-1/8"
INT.
79.4mm
3-9/32"
EXT. EXT.
83.3mm
5-1/8"
130.2mm
INT.
3-1/4"
82.6mm
3-13/32"
86.5mm
2190 WITH ME LEVER 2190 WITH MG LEVER 2190 WITH MI LEVER
INT.
EXT.
2-25/32"
70.6mm
2-15/16"
74.6mm
4-3/16"
106.4mm
INT.
EXT.
3-17/32"
89.7mm
3-11/16"
93.7mm
4-11/16"
119.1mm
INT.
EXT.
3-3/16"
81mm
3-11/32"
84.9mm
5"
127mm
4-1/2"
114.3mm
2101 STRIKE (covers and previous cutout for MS® Deadbolt) Retrofits 4901 and 4501 strike preparations.
2190 WITH MJ LEVER
2190 WITH MN LEVER** 2190 WITH MV LEVER** 2190 WITH MW LEVER
* THE 2190-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE.
HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE.
** HANDED
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...