E8211
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
DEADLOCKS
1830 Bottom Rail
Deadlock (Swing Bolt)
1830 BOTTOM RAIL DEADLOCK (SWING BOLT)
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when bolt is
in a positively locked or unlocked position. Lock accepts any
standard 1-5/32" mortise cylinder from either or both sides.
Cylinder must have MS® dimensioned cam.
Specifications
CYLINDER HEIGHT (BACKSET)
• 31/32" and 1-1/8" only.
DL-3
FULL GLASS
ALUMINUM
GRADE 1
The 1830 Bottom Rail Deadlock provides bottom rail locking
in ultra-narrow stile or tempered glass doors. Tamper-proof
with an armored faceplate, it protects with a minimum
threshold strike opening.
Function
For bottom rail locking of ultra-narrow stile or tempered glass doors whose
bottom rail (shoe) is too shallow for the MS1861 Bottom Rail Deadbolt (see
DEADLOCKS). Mechanism is that of the MS1850 Deadlock, but with the bolt
size reduced. This keeps the threshold strike opening to a practical minimum,
avoiding collection of debris or snagging on high-heeled shoes. Armor
faceplate protects cylinder setscrews from tampering and keeps them from
loosening. Not applicable to wood doors.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth (depth varies with cylinder height).
BOLT S
• 15/32" x 5/8" x 2-1/8" with 5/8" throw. Six-ply laminated
steel with eight plys within case. Center ply has aluminaceramic core to deter hacksaw attack.
STRIKE
• See back page for dimensions of strike slot which can be
cut in metal thresholds. 4006 strike (shown) is available
separately, with stainless steel trim plate and plastic box.
CYLINDER CAM
• 1830 Bottom Rail Deadlocks are operable by any
standard 1-5/32" diameter mortise cylinder with MS® cam,
dimensioned as shown. Cylinders with MS® cams can be
readily obtained from most cylinder manufacturers. See
CYLINDERS section for cylinder make, thumbturn and
trim ring information.
.800" ± .005"
“Dim A”
20.3mm ± .127mm
4006 STRIKE
ARM-014-9/14
.120"
R
3.0mm
.182"
4.6mm
OPTIONS
• Specify either 31/32" or 1-1/8" cylinder height (see
dash table). 4006 strike and cylinder(s) available
separately, if required.
STA N DA R D PACK AGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns are available separately.
Shipping weight: 1-1/2 lbs.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
DL-4
1830 BOTTOM RAIL DEADLOCK (SWING BOLT)
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DEADLOCKS
Dimensions
6-3/8"
161.9mm
THRESHOLD
2-5/16"
58.7mm
6-7/8"
174.6mm
5-31/32"
151.6mm
4006 Strike Dimensions
2-3/4"
69.9mm
3/8"
9.5mm
2"
50.8mm
1-3/8"
34.9mm
1/2"
12.7mm
9/16"
14.3mm
1/2"
12.7mm
1-1/2"
38.1mm
15.9mm
5/8"
5/64"
2mm
DASH NO.
-02
-03
3/8"
9.5mm
1/4"
6.4mm
“A”
21/32"
16.7mm
1"
29/64"
25.4mm
11.5mm
CYLINDER
HEIGHT DIM. A
31/32"
24.6
1-1/8"
28.6
1-5/8"
mm
41.3
1-25/32"
mm
45.2
Stile & Threshold Preparation
1-11/32"
2-3/16"
55.6mm
1-3/4"
44.5mm
12.7mm
Lock & Cylinder
34.1
1/2"
mm
1-1/4"
DIA.
31.8mm
(2 PLCS)
CYLINDER
6-3/8"
161.9mm
10-32
DRILL & TAP
(2 PLCS)
CYLINDER
HEIGHT
TUBE
SPACER
Installation
mm
MIN. CHANNEL
“A” + 1/32"
mm
TUBE SPACERS
MAY BE REQ’D
TO POSITION
LOCK
DEPTH:
10-32
MACHINE
SCREWS
HOW TO ORDER 1830 BOTTOM RAIL DEADLOCK Specify quantity and the following information. Order related products separately.
PRODUCT NO.
(SPECIF Y FOR CYLIN DER HEI GHT AND LO CK DEPTH)
DASH NO.
FINISH
1830 -02 -628
02 Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized
03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
4006 strike.
Cylinder guards.
1830 Bottom Rail Deadlocks are operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...