Adams Rite 1000-01-11-121, 1000-01-11-130, 1000-01-12-130, 1000-01-13-130, 1000-01-14-121 Specsheet
...
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL
PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
ESCUTCHEON
OR DOOR PULL
*SPINDLE LENGTH
L*
L*
L*
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
5/8"
15.9
mm
5/16"
7.9
mm
5/32"
4
mm
1/4"
6.4mm
3/32"
2.4
mm
7/16"
11.1mm
1-1/4"
31.8
mm
1-1/4"
31.8mm
1"
25.4mm
3/32"
2.4mm
NOTE:
9/32"
7.1mm
3/8"
9.5
mm
7/8"
22.2
mm
15/32"
11.9
mm
25/32"
19.8mm
5/8"
15.9mm
1/8"
3.2mm
5/32"
4
mm
7/16"
11.1mm
1/4"
6.4
mm
1-13/16"
46mm
1-5/16"
33.3mm
1/2"
12.7mm
1/4"
6.4mm
1/2"
12.7mm
23/32"
18.3mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
TRIM
1000 Turns
The 1000 Turns are designed to operate Adams Rite
MS1847 Deadlocks and the 5017 Wood Door Deadlock.
1000 TURNS
Specifications
TURN LEVER
• Zinc alloy. Trim finish RC130.
ESCUTCHEON
• Stainless Steel. Trim finish in RC130.
SPINDLES
• Hardened steel, plated for corrosion resistance. First
dash number in order guide indicates spindle parallel
or perpendicular to turn level (turn drawings on back).
Second dash number indicates spindle length “L” (see
dash table on back).
T-1
Function
1000 Turns are designed to operate Adams Rite MS®1847 Deadlocks and 5017
Wood Door Deadlock. 1000-11 and 1000-21 have a rectangular escutcheon for
mounting directly on door. 1000-01 and 1000-02 are without escutcheon, designed
for easy push-nut mounting to door pull or other trim plate.
1004 TURN
• 1004 Turn has a longer, more ergonomically-friendly
turn lever.
1015 TURN
• Available with 1016 blank plate for doors from 5/8"
to 2-1/4"thickness. Without blank plate turn available
(for use with cylinder pull) on doors from 7/16" to 2"
thickness. Standard finish 130, Satin Aluminum enamel.
Turn 1015 for use with 5017 lock is designed for wood
door applications.
OPTIONS
• The availability of both perpendicular and parallel drives
in these turns, coupled with the three hub drive positions
of the MS1847 lock, provides several options. Choice of
turn drive position relates directly to the particular lock hub
drive position. Special care in specifying both the proper
turn and lock in ordering is recommended. Chart on the
back of page shows turn positions relative to lock hub
positions. Broken line indicates direction of travel (45°) to
retract bolt (see chart below).
STA N DARD PAC K AGE
• Individually packaged. -21 and-11 assembled, with
escutcheon. -01 and -02, unassembled, include turn,
spindle, washer and push nut for assembly on the door
pull plate. Shipping weight: 1/16 lb.
1000
-01
-02
1000
ARM-014-9/14
-11
-12
PERPENDICULAR
DRIVE
PARALLEL
DRIVE
MS1847-09 MS1847-06 MS1847-02
MS1847-10 MS1847-13 MS1847-11
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL
PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
NOTE:
9/32"
7.1mm
3/8"
9.5mm
7/8"
22.2
mm
15/32"
11.9mm
25/32"
19.8
mm
5/8"
15.9
mm
1/8"
3.2mm
5/32"
4mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
T-2
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
1000 TURNS
TRIM
DimensionsDimensions
1-1/4"
31.8
mm
1-1/4"
31.8
mm
5/8"
15.9mm
1/2"
12.7mm
1/2"
12.7
mm
5/16"
7.9mm
1/4"
6.4mm
1-5/16"
33.3mm
1-13/16"
46mm
11.1mm
1"
25.4mm
5/32"
4
mm
23/32"
18.3
mm
7/16"
L*
ESCUTCHEON
OR DOOR PULL
L*
*SPINDLE LENGTH
DASH CHART
L*
7/16"
11.1mm
6.4
1/4"
mm
3/32"
2.4mm
CSK FOR
#6 FLAT
HEAD
SCREW
Dash Chart
NO. " L" MM NO. " L" MM NO. " L" MM NO. " L" MM
-11 17/ 32 13 -17 59/64 23 -23 1-19/ 6 4 33 -29 1-43/ 64 42
-12 39/64 15 -18 63/64 25 -24 1-23/ 64 35 -30 1-47/ 64 44
-13 43/64 17 -19 1-3/64 26 -25 1-27/ 64 36 -31 1- 51/ 6 4 46
-14 47/6 4 19 -20 1- 7/6 4 28 -26 1 -31/6 4 38 -32 1-55/6 4 47
-15 51/6 4 20 -21 1 -11/ 6 4 30 -27 1-3 3/64 39
-16 55/64 22 -22 1 -15/ 64 31 -28 1-39/6 4 41
1/4"
6.4mm
3/32"
2.4
Stile Preparation
OF LOCK
LOCK
HUB
mm
5/32"
L* = A +
4mm
“A”
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
Installation
SPINDLE
“A”
“L”
DOOR PULL
TURN
L* = A + B
“B”
DASH -01 or -02
WASHER
TURN
DASH -11 or -21
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
15/32"
11.9
mm
7/8"
22.2mm
3/8"
9.5mm
25/32"
19.8
mm
TO FACE OF LOCK
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
DOOR PULL
DOOR PULL
PULL REQUIRED
5/8"
15.9mm
9/32"
NOTE:
7.1mm
HOLE IN DOOR
PUSH
NUT
1/8"
3.2mm
“B”
MAX.
HOW TO ORDER 1000 SERIES TURNS
Specify quantity and the following information. Order related products separately.
PRODUCT NO. TURN T YPE SPINDLE LENGTH RI TE CO AT FIN IS H
1000 -21 -14 -130
See TURN TYPE drawings
(right side)
See DASH CHART
(above)
119
To match 335 Black Anodized
121 To match 313 Dark Bronze Anodized
130 To match 628 Clear Anodized
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock. 5017 Wood Door Deadlock.
Tur n Typ e
TURN WITHOUT ESCUTCHEON
FURNISHED UNASSEMBLED
1000-02
PERPENDICULAR DRIVE
TURN WITH ESCUTCHEON
FURNISHED ASSEMBLED
1000-21
PERPENDICULAR DRIVE
©2014, Hanchett Entr y Systems , Inc., an ASSA ABLOY Group company.
1000-01
PARALLEL DRIVE
1000-11
PARALLEL DRIVE
Loading...