Adamatic BARP-3 Specifications

Download

Page 1

belshaw-adamatic.com

Serving the donut and bakery industry for over 85 years

1-800-578-2547 ▪ [email protected] ▪ www.belshaw-adamatic.com

Belshaw Adamatic

BARP-3 Series Retarder-Proofer, 2-Door, Roll-in (Triple-wide rack capacity)

Construction

Stainless steel exterior with 300 Series s/s interior and ▪ aluminized steel top

Foamed insulation in walls ceilings and doors ▪ Modular wall and ceiling panels with cam lock ▪

construction Rapid responding air-wash heat and humidity system ▪ Heavy duty welded s/s hinges ▪ Rapid responding air-wash heat and humidity system ▪ Depth up to 120”, capacity up to 18 racks ▪ 208/240 VAC, either 1 or 3-phase, eld convertible ▪ Includes condenser standard ▪ Refrigeration components compatible with R404A ▪

refrigerant

Operation

Dual purpose, provides both proong and retarding ▪ 70°-120° F proong range ▪

34°-45° F retarding range ▪ 50 - 99% humidity range ▪ Non-submerged calrod type heaters ▪ Evaporators sized for high humidity levels, prevents ▪

drying Refrigeration system sized for rapid pull down ▪ Interior bumpers, lighted interior ▪

BARP-3-40 Retarder Proofer

Controls

Digital set Temperature, Humidity, Time ▪ PID type controls for rapid accurate response without ▪

overshoot Operates in individual modes or automatic mode ▪ All digital controls mounted in the door at eye-level ▪ Large LED display w/ Real-time clock ▪

Options

Stainless steel oor ▪ Refrigeration condenser (requires separate connection) ▪ Prison package ▪

Model/Rack Capacity*

Model / Depth Side Load

28.4”Wx18.0”D

End Load

26.0”Wx20.4”D

Double

28.4”Wx36.0”D

BARP-3-30 3 Racks 4 Racks None

BARP-3-40 6 Racks 4 Racks 3 Racks

BARP-3-50 8 Racks 7 Racks 3 Racks

BARP-3-80 13 Racks 11 Racks 6 Racks

BARP-3-110 18 Racks 16 Racks 8 Racks

*Racks may be snug at maximum capacity. For details of rack

arrangement, see the Rack Capacity Guide at http://www.belshaw- adamatic.com/specs/belshaw-adamatic-rack-capacity-guide.pdf

Short Bid Specication

Rack Proofer Model BARP-3-xxx [insert 30, 40, 50, 80, or 110]

shall be a 5 to 13.2 kW electrically heated, double door roll-in

rack unit with: quick responding air-wash heat / humidity system; modular cam lock panel construction with foamed insulation; all

stainless steel interior, with protective cart bumpers; heavy-duty

doors with magnetic seal/mechanical closure system and full

width protective bar handle; simple computerized controls, door

mounted at eye-level, with accurate digital temperature, humidity and time readouts; plus all the features listed and options checked.

Standard Product Warranty

One-Year Parts and Labor, USA and Canada. (USA includes 50 states + DC unless specied)

Certications

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [email protected]

814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com

Page 2

BARP-3 Series Retarder-Proofer, 2-Door

with ceiling-mounted Condenser

Add 16.9”

91.4

Opening Width

Specications

Model

BARP-3-30 7000

88.5

Retarder BTU’s

3.7

for Drain

Water and �

Electrical �

13.5 from �

74.1

Opening Height

88.00

4.0

Drain

Overall�

edge

Depth

Freight Class=70

Height Width Depth Approx Weight (lbs)

Int Ext Int Ext “A” “B” “C” “D” Actual Ship

68” 26” 35.25” 31.13” 1372 1472

102.5

84.5

Inside Width

BARP-3-40 9000 78” 36” 45.25” 41.13” 1457 1582

BARP-3-50 9000 88” 46” 55.25” 51.13” 1597 1722

74.1” 91.4” 96.6” 102.5”

BARP-3-80 15,000 118” 76” 85.25” 81.13” 1957 1082

BARP-3-110 18,000 148” 106” 115.25” 119.13” 2494 2619

Electrical Requirements

Model Voltage Total kW 1-Phase 3-Phase Condenser

BARP-3-(30-40-50-80) 208 VAC 5 kW 24.0 A 13.8 A

240 VAC 6.6 kW 27.5 A 15.8 A

BARP-3-110 208 VAC 10.2 kW 48.0 A 27.6 A

240 VAC 13.2 kW 55 A 31.6 A

Volts: 208/240/60/1 Amps: 6A-18A. Condenser model depends on target minimum temperature chosen.

Condenser specs: http://www.belshaw-adamatic.

com/specs/belshaw-adamatic-retarder-proofer-BARP-

condenserspecs.pdf

Inside Depth

Water Supply and Drainage Requirements

Model Water Supply Drainage

BARP-3-(30-40-50-80) 1/2” NPT .07 GPM @ 60 PSI 1/2”PVC; 110°F

BARP-3-110 1/2” NPT .14 GPM @ 60 PSI

Installation Requirements

Requires on-site installation ▪ KD shipment. When disassembled, can t through 36” ▪

opening Refrigeration condenser requires separate connection ▪

Consult factory for shipment fully assembled ▪ 208/240 VAC, either 1 or 3-phase eld convertible ▪

1/2” NPT cold water conection ▪ 1/2” PVC vented drain connection ▪ Refrigeration system must be installed by a licenced refrig- ▪

eration technician This appliance is designed to operate at normal room ▪

temperatures; if installed next to an oven or other heat source allow a minimum clearance of 4” to prevent heat

2” clearance on both sides, required for door to open 90° ▪ For install on non-porous surfaces only ▪ Your local water conditions may damage your appliance. ▪

Failure to properly treat water may result in damage and may void your warranty. Ensure that your water supply

meets these minimum water quality specications:

<1 GPM Max Vented

Alkalinity: 22 ppm Aluminum: 17 ppm Calcium: 3.3 ppm Free chlorine residual: 0.6 ppm Magnesium: 0.65 ppm PH range: 8.5 s.u. Sodium: 8.5 ppm -

Total Hardness: 11.9 ppm transfer. Clearance from combustibles is 0” sides and back ▪

BELSHAW ADAMATIC BAKERY GROUP 206-322-5474 ▪ 800-578-2547 ▪ [email protected] 814 44th St NW, Suite 103, Auburn, WA 98001 USA • www.belshaw-adamatic.com