ADA INSTRUMENTS HAND MIXER 1000, HAND MIXER 1200, HAND MIXER 1400 User Manual [ru]
Operating manual
Hand Mixer
Model: HAND MIXER 1000 / 1200 / 1400
Manufacturer
Address: WWW. ADAINSTRUMENTS.COM
HAND MIXER 1000 / 1200 / 1400
Table of contents
1. Main components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Production descpription . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Mixing tools choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
8. Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Appendix 1. Warranty card
Appendix 2. Certicate of acceptance and sale
HAND MIXER 1000 / 1200 / 1400
Please read and understand owner’s manual before operating the machine, keep well the manual. Don’t operate the
machine until you read the manual and understand the operating and trouble shooting for the machine
l. MAIN COMPONENTS
(1) Mixing Tool (Paddle)
(2) M14 tool connection shaft
(3) Electronic speed regulator
(4) I II Speed Switching Poker Rod
(5) Start Switch
(6) Switch Rest-Lock Knob
(7) Motor Housing
7
6
3
2
3
MEASUREMENT FOUNDATION
5
4
1
HAND MIXER 1000 / 1200 / 1400
2. PRODUCTION DESCRIPTION
The mixer is an electrical power mixer, which tted with single mixing tool.
It is used for mixing building materials and chemical materials, for mixing even heavy materials quickly and thor-
oughly, especially for the difcult mixing materials, such as high density mortar, dried building materials, two or
more kinds mixed materials.
Different mixing toolsare available for the mixer, and different I II speed meet the demand of different materials
mixing.
3. CAUTIONS
Please read and follow these instructions before operating the machine. It may occur unpredictable result if you do
not follow it! For people and machine safety, please obey it!
(1) DO check the safety situation when the machine is in operating!
(2) DO operate the machine in the suitable working space!
(3) DO keep other persons away from the working space!
(4) DO avoid the machine affected with damp when the machine operated in the amp working space!
(5) DO keep the working space sufcient lighting!
(6) DO check the power source/voltage is same as showed on the machine labels!
(7) DO check the machine have earth protecting or not!
(8) The machine CANNOT be over loading!
(9) The electrical cable CANNOT be too far away the machine, CANNOT pull the cable to disconnect the plug from
4
MEASUREMENT FOUNDATION
HAND MIXER 1000 / 1200 / 1400
the socket directly! Keep the cable from heating, damp, scratch!
(10) DO only use no scratch, no defected cable with plug!
(11) DO pull off the power source when the machine is out of work, maintenance or changing the mixing operation!
(12) DO NOT mix the material which ammable pointless than 21ºC;
(13) DO NOT use solvents for cleaning the tools! Unless it will have explosion dangerous!
(14) DO NOT install and operate the machine in the ammable and explosivity circumstances!Unless it will have
explosion dangerous!
(15) DO NOT use the slide or movable mixing drum!
(16) DO NOT start the mixer until the mixing tools is in the mixing drum or other drums!
(17) DO NOT run idle of the machine!
(18) DO NOT take out the sample until the machine is stopped! DO NOT touch into the mixing drum when the machine is in operation!
(19) DO NOT start the machine when the dried materials is in the drum or stick to the drum!
(20) The machine will not be failure only you operate it carefully!
(21) Please wear goggle and car cap when operating the machine!
(22) DO use only original spare parts for the machine maintenance!
4. MIXING TOOLS CHOICE
Use only the supplied mixer nozzles only. Theirs screw connection is M14.
5
MEASUREMENT FOUNDATION
HAND MIXER 1000 / 1200 / 1400
5. MAINTENANCE
Correct maintenance for the machine can prolong the workinglife. The handle switch must always keep in proper func-
tion and good maintenance. The mixing tools should be cleaned when the operation is nish or no use for long time.
Normally the owing water or quartz sand can clean the mixing tools well. Do not force any mechanical stress in the
machine, such as POUND, because it will be unavoidable damaged.
The mixing shaft must always be antipollution. The hole of hexagonal socket must always be put protecting cover. The
vent of motor housing can not be covered when the machine is in operation, there can not be any ammable materials
in the machine. The vent must be often cleaned. Only original parts can used in this machine. The carbon brush must be
checked and maintenance when the machine operation up to 60 hours, please change the brush in time if nd the brush
worn out. The operation details see the pictures.
(Picture l):Cut off the power rst and take apart the motor housing.
(Picture 2):Pull out the plate, replace the carbon brush.
Pic.1 Pic.2
6
MEASUREMENT FOUNDATION
HAND MIXER 1000 / 1200 / 1400
6. OPERATION
(Picture 3): Take out the two parts of the mixing tools from the carton.
(Picture 4): Fitting the two parts.
(Picture 5): Use the wrench until it is tightened.
(Picture 6): Put the M14 mixing tools to the outlet shaft.
(Picture 7): Turn the screw of the mixing tools to the direction of the old position and the mixing tool is tightened.
Pic.3 Pic.4 Pic.5
Pic.6 Pic.7
7
MEASUREMENT FOUNDATION
HAND MIXER 1000 / 1200 / 1400
START MACHINE
Push down die switch rest-lock knob rst and then push down the start switch.
Mechanical speed regulator operation instruction:
A.When the machine is under STOP condition, please turn the Knob switch to change the speed;
B. When you can not nish changing speed completely by turn the Knob switch, plese turn the shaft paddles slightly
and change speed.
Electronic speed regulator operation instruction:
Turn on the power switch rst, then turn the regulator switch which located in the left handle to set vour wanted speed.
STOP MACHINE
Loose the start switch so the machine will be stopped.
8
MEASUREMENT FOUNDATION
Loading...