ADA INSTRUMENTS AeroPipe User Manual [ru]

Operating manual

Thermo-Hygrometer

Model: AeroPipe

Manufacturer

Address: WWW. ADAINSTRUMENTS.COM

Table of contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Illustration of display screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4. Operation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5. Trouble shootings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

6. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

7. Warranty/Exceptions from responsibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Appendix 1. Certificate of acceptance and sale Appendix 2. Warranty card

AeroPipe

INTRODUCTION

ADA AeroPipe thermo-hygrometer adopts the digital sensor with high accuracy. It has the features of high accuracy, fast speed and good stability. It professionally measures the ambient humidity and temperature, wet bulb and dew point temperature, GPP and Enthalpy function. ADA AeroPipe thermo-hygrometer is widely used in multiple applications: food storage and transport, antique preservation, file management, building material experiment, agriculture, forestry, stock raising, building inspection, medical hot zone, pipe/HVAC system repair, etc.

APPEARANCE

1) Thermo-hygro sensor

2) LCD screen

3) Mode button

4) Unit switch button

5) The hanging buckle

6) Battery cover

7) Probe locating base

AeroPipe

ILLUSTRATION OF DISPLAY SCREEN

RH Relative humidity indicator TEMP Temperature indicator DEW Dew point indication WET Wet bulb indicator MIX Mix ratio indicator ENTH Enthalpy value indicator GPP Mix ratio unit g/kg Mix ratio unit kJ/kg Enthalpy value metric unit BTU/Ib Enthalpy value British unit ºF Fahrenheit ºC Celsius

OPERATION INSTRUCTIONS

1) Open the battery lid, place 3xAAA batteries in the battery compartment and put back the battery lid. The unit will power on automatically.

2) Press the mode button to switch the display mode, press the unit switch button to switch among the units.

3) Keep pressing the mode button to power off the unit. Press any button to power on the unit.

4) The unit will auto power off if no action in 2 minutes.

5) Please replace the battery if low battery indicator shows on the display.

AeroPipe

Low battery indicator

AeroPipe

Operation Notes

1. Please don’t operate this product unless the manual has been read.

2. To assure accuracy, remove the protection cap and make sure the sensor is fully exposed before taking any measurement.

3. Remove the battery before long term storage. Keep the sensor apart away from water or any kind of liquid.

4. To assure accuracy after calibration, do not expose the sensor in saturated environment for long time.

5. To avoid damages to the instrument, do not operate near following places: a) Vapor and dusty places b) EMF places (Electro-magnetic fields: such as arc welders, induction heaters) c) Static environment d) Heat shock (caused by great and sudden temperature change, wait for 30 minutes until the unit is stabilized before any operation).

Battery Safety Instructions

● Please remove the batteries when clean the product.

● Remove the batteries before long term storage

● Please install the batteries properly as the instructions of the positive and negative charges

● Please dispose the batteries properly. High temperature will cause explosions and do not burn the batteries. Strap insulated tape around the battery

charges to avoid unsafe contacts with other objects. Many countries have regulations about the batteries disposing. Please follow the local regulations of battery disposing.

Cautions

● Don’t drop the product or use by force.

● Don’t disassemble the product to avoid failure.

● Close the protection cap when not in use.

● Don’t place the product with corrosive gas or objects.

● Keep the unit dry and clean.

● Avoid dust and water, which may stain the unit.

● Don’t immerse the product into water, which will result in damage to product..

● Check the battery regularly to avoid to go bad.

● Please remove the battery, if it is not for use for a long time.

TROUBLE SHOOTINGS

TECHNICAL DATA

Temperature

AeroPipe

Problems Causes Solutions

No display on the screen Battery runs down Check and replace the battery

Show “ ” sign

Measuring Range -20°C~70°C

Resolution 0.1°C

Measuring accuracy ±1.0°C (-10 to 40°C); ±1.8°F (14 to 104°F);

Low battery Replace the battery

±2.0°C (-20 to -10 and +40 to 70°C); ±3.6°F (-4 to +14 and 104 to 158°F)

Measuring Range 0-100%RH

Humidity

Dew point temperature Yes

Wet bulb tempearture Yes

GPP Yes

Enthalpy value Yes

Power Resource 3xAAA batteries

Auto Power off no action in 2 minutes

Operating temperature -20°C~70°C

Working humidity 0~100% RH non-condensing

Storage Condition -20°C~70°C; <85% RH (w/o battery)

Size 80mm ( with probe 209mm)×47mm×47mm

Weight About 63 g (w/o battery)

Resolution 0.1%RH

Measuring accuracy ±3%(20 to 80%); ±3.5% (0 to 20% and 80 to 100%)

AeroPipe

Warranty

This product is warranted by the manufacturer to the original purchaser to be free from defects in material and workmanship under normal use for a period of two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, the product will be repaired or replaced (with the same or similar model at manufactures option), without charge for either parts of labour. In case of a defect please contact the dealer where you originally purchased this product. The warranty will not apply to this product if it has been misused, abused or altered. Withiut limiting the foregoing, leakage of the battery, bending or dropping the unit are presumed to be defects resulting from misuse or abuse.

Exceptions from responsibility

The user of this product is expected to follow the instructions given in operators’ manual. Although all instruments left our warehouse in perfect condition and adjustment the user is expected to carry out periodic checks of the product’s accuracy and general performance. The manufacturer, or its representatives, assumes no responsibility of results of a faulty or intentional usage or misuse including any direct, indirect, consequential damage, and loss of profits. The manufacturer, or its representatives, assumes no responsibility for consequential damage, and loss of profits by any disaster (earthquake, storm, flood ...), fire, accident, or an act of a third party and/or a usage in other than usual conditions. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits due to a change of data, loss of data and interruption of business etc., caused by using the product or an unusable product. The manufacturer, or its representatives, assumes no responsibility for any damage, and loss of profits caused by usage other thsn explained in the users’ manual. The manufacturer, or its representatives, assumes no responsibility for damage caused by wrong movement or action due to connecting with other products.

AeroPipe

+ 16 hidden pages