ADA Split-stack OWNER’S MANUAL

Split-stack

OWNER’S MANUAL

Originally written by ADA SIGNAL PROCESSORS, INC. Scanned and edited by Jur at 10th of october 2002.
Original ADA logo edited and rendered by Barend Onneweer of Raamw3rk
copyrighted and may not be sold or placed on a website without permission of the editor.

Release No.1 for http://www.adadepot.com

.) The version of this manual is

ADA Splitstack owner’s manual

SPLIT-STACK OWNER'S MANUAL

Thank you for purchasing the ADA SPLIT-STACK speaker cabinet. The SPLIT-STACK is an
8 ohm cabinet using two (2) 16 ohm, 50 watt Celestion speakers in a parallel wiring
configuration. Your SPLIT-STACK cabinet can easily handle 100 watts of power.

There are four (4) SPLIT-STACK models:

1. T2-12C Slant face 2X12 Celestion

2. B2-12C Straight face 2X12 Celestion

3. T2-12V Slant face 2X12 Celestion Vintage

4. B2-12V S traight face Celestion Vintage
SPLIT-STACK speaker cabinets can be connected to power amps in various series and

parallel combinations to handle any sound level and impedance requirements. Always use
12 to 16 gauge speaker cable when connecting cabinets to power amps and interconnecting
cabinets. NEVER USE GUITAR CABLES TO CONNECT SPEAKER CABINETS.

Please take a moment to complete and return the enclosed
warranty card now.

FEATURES:

• Celestion speakers for ultimate guitar tone

• Tough, wear - resistant Ozite covering

• Series and parallel extension jacks

• Portable, lightweight design - 48 lbs

• Durable stacking hardware

• Center balanced handles for easy transport

• One year parts and labor warranty. (Six months on Celestion drivers.)

IMPEDANCE MATCHING:

Amplifier output Number of Set-up
impedance in ohms SPLIT-STACKs Diagram
for each channel for each channel

2 1 A
2 2 B
2 4 D
2 8 F
4 1 A
4 2 B
4 4 E
4 8 E
8 1 A
8 2 C*
8 4 E
8 8 G*
16 1 -**
16 2 C
16 4 -**
16 8 G

* = Not recommended. Use amp with 4 or 16 Ohm output
** = Not recommended. Use amp with 8 Ohm output.

Page: 2 of 4