Instruction Manual
Weather Station
model 01121
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor...... 2
Features & Benets: Display ..... 3
Setup .................................... 6
Sensor Setup ......................... 6
Display Setup ........................ 7
Set the Time, Date & Units ...... 8
Backlight Settings ................... 8
Placement Guidelines ............. 9
Using the Weather Station.....10
Programmable Alarms........... 11
Troubleshooting ....................12
Care & Maintenance.............13
Calibration ...........................13
Specications........................14
FCC Information ...................14
Customer Support .................15
Warranty..............................15
Questions? Contact Customer Support at
877-221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display with Tabletop Stand
2. Outdoor Sensor
3. Instruction Manual
4. Power Adapter
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1 year of warranty protection
www.AcuRite.com
Features & Benets
1
2
5
3
4
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being sent
to the display.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s
A-B-C switch to ensure units synchronize.
5. Battery Compartment Cover
2
Features & Benets
1
4
3
6
BACK OF DISPLAY
1. Integrated Hang Hole
For easy wall mounting.
2. Plug-in for Power Adapter
3. Backup Battery Compartment
4. Fold-out Tabletop Stand
5. RESET Button
For full reset to factory defaults.
5
2
7
6. A-B-C Switch
ID code that must match sensor’s
A-B-C switch to ensure units
synchronize.
7. Power Adapter
8. Battery Compartment Cover
(not shown)
3
Features & Benets
FRONT OF DISPLAY
1. Date
2. Heat Index/Dew Point
Heat Index calculation displays
when temperature is 80°F (27°C)
or above.
Dew Point calculation displays
when temperature is 79°F (26°C)
or below.
3. Outdoor Sensor Signal Strength
4. Alarm ON Indicator
Indicates alarm is activated to emit an
audible alert when conditions exceed
your presets (see page 11).
5. Current Outdoor Temperature
Arrow icon indicates the direction
temperature is trending.
6. Outdoor High & Low Temperature
Records
Highest and lowest temperature
recorded since midnight.
7. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
8. Button
For alarm setup.
9. and Buttons
/\. V
For setup preferences and viewing
indoor high & low records.
10. SET Button
For setup preferences.
11. Button
For momentary backlight and
dimmer settings.
12. Current Indoor Humidity
Arrow icon indicates direction
humidity is trending.
13. Humidity Level Indicator
Indicates current humidity
conditions (humid, OK, dry).
14. Outdoor High and Low Humidity
Records
Highest and Lowest humidity recorded
since midnight.
15. Current Outdoor Humidity
Arrow icon indicates the direction
humidity is trending.
16. Sensor Low Battery Indicator
17. Current Barometric Pressure
Arrow icon indicates the direction
pressure is trending.
18. 12 to 24 Hour Weather Forecast
Self-calibrating forecasting pulls data
from the outdoor sensor to generate
your personal forecast.
19. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
~
20.
21. Display Low Battery Indicator
22. Atomic Clock
Icon
AUTO
Indicates display is in auto-dimming
brightness mode (see page 8).
Maintains time with split-second
accuracy and automatically updates
for daylight saving time.
5