AcuRite 01083 User manual

Features & Benets

Instruction Manual

Humidity Monitor

model 01083

1 2 3

5 6

--10

--63

,n•F:~

IU •d

CALIBRATED,---

ACU►RITE.

FRONT

1. High Humidity Record

Highest humidity recorded for #2.

2. Record Timespan

Indicates viewing records for last 24 hours or all-time.

3. Low Humidity Record

Lowest humidity recorded for #2.

4. Humidity Level Indicator

Indicates a high, low or ideal humidity comfort level.

5. High Temperature Record

Highest temperature recorded for #2.

6. Low Temperature Record

Lowest temperature recorded for #2.

7. CALIBRATED Indicator

Displays under calibrated values.

8. Current Temperature

Arrow icon indicates direction temperature is trending.

9 8

9. Low Battery Indicator

10. Current Humidity

Arrow icon indicates direction humidity is trending.

BACK

A y

11. & Buttons

12.

13. °C/°F Button

14. Integrated Hang Hole

15. Magnetic Backing

16. Battery Compartment

17. Battery Compartment Cover

For calibration and toggling records being shown.

Button

For calibration setup.

For selecting temperature units.

For easy wall placement.

SETUP

Remove the protective lm that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Install or Replace Batteries

Batteries must be installed for this product to operate. AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended.

1. Slide off the battery compartment cover.

Install Batteries

2 AAA batteries

2. Insert 2 x AAA batteries into the battery compartment. Follow the polarity (+/-) diagram in the battery compartment, as shown.

3. Replace the battery cover.

Select Degrees Fahrenheit or Celsius

To select between degrees Fahrenheit (ºF) or

Celsius (ºC) temperature units, press the “ºC/ºF”

button located on the back of the display.

Placement for Maximum Accuracy

AcuRite product sensors are sensitive to surrounding environmental conditions. Placement in a proper location is critical to the accuracy and performance of this product. Place the monitor in a dry area free of dirt and dust. To ensure accurate temperature measurement, place monitor out of direct sunlight and away from any heat source or vents. To ensure accurate humidity measurement, place monitor away from humidity sources.

The monitor comes with a magnetic backing to stick on the fridge.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

OPERATION

Using the Humidity Monitor Humidity Level Indicator

The Humidity Level Indicator easily conveys a low, high or ideal indoor humidity level for your home and health:

Learn more at http://www.acurite.com/humidity-health

High & Low Records

High and low records are displayed for temperature and humidity. 24-hour records automatically clear every 24 hours since the batteries were installed. All-time records are the maximum and minimum readings recorded since the batteries were installed.

To manually clear the high records currently being viewed, press and HOLD the “ ” button for 3-5 seconds. Dashes display to conrm you have cleared

the records.

To manually clear the low records currently being viewed, press and HOLD the

“ ” button for 3-5 seconds. Dashes display to conrm you have cleared the

records.

Calibration

The temperature and humidity readings can be calibrated on the display to

improve accuracy. Calibration can improve accuracy when product placement

or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the “ “, “ “and “ “

buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected item, press and release the “ “ or “ “

buttons to calibrate the data value higher or lower from the actual reading.

3. To save your adjustments, press and release the “ “ button to adjust the

next reading. The CALIBRATED indicator will remain under the calibrated

values.

After 12-15 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the batteries are removed.

A ,.c y

A y

Specications

TEMPERATURE RANGE

HUMIDITY RANGE

POWER

-4°F to 158°F; -20°C to 70°C

1% – 99% RH (relative humidity) 2 x AAA batteries

+ 5 hidden pages