Acurite 00869SBCA User Manual

Instruction Manual

00869 Barbecue Thermometer/Timer

FEATURES:

• RF433MHz Wireless temperature transmission for convenient
BBQ or oven cooking

• 3-line LCD shows cook temperature, set temperature an timer for
BBQ or Oven cooking.

• Remote Pager with LCD showing Timer or Clock

• 23 hr 59 min Timer on main unit

• 23 hr 59 min Timer on remote pager

• High Temperature Probe that withstands temperatures up to 700 F,
with a 3 ft cable

• Compact wireless remote pager with temperature alert, timer, and
clock functions

• Temperature alert for both main unit and remote pager

• Double magnet for metal surface attachment

• Remote Pager out of range alert, 100 ft transmission range, FCC
complied

• Metal Probe wide temperature range 14 F to 392 F ( -10 C to 200 C )

• Low battery indicator

• Main unit requires 2 – “AAA” batteries

• Remote pager requires 2 – “AAA” batteries

Name/ Function of Buttons

1. Transmitter Main Unit:

Button Press function Hold 2 seconds

MODE Select Timer/ Clock Clock set
+, HR Temp advance, HR advance Fast advance

(press hr + min when timer stopped = clear timer)

- , MIN Temp backward, MIN advance Fast adjust
HR & MIN Press at same time to clear timer Fast advance
START/STOP
ON/OFF Push ON/OFF switch.
ALARM Slide switch turn temp alarm on and off

Timer start/ stop

2. Remote Pager:

Button Press functions Hold 2 Seconds

MODE Select clock or timer
+, HR Hour advance Fast advance

-, MIN MIN advance Fast advance
HR & MIN Press at same time to clear timer Fast advance
START/STOP Timer start/ stop
ON/OFF slide switch turn power on/ off
ALARM slide switch turn temp alarm on/ off

Set-Up:

1. Battery Installation:

- Install 2 pcs AAA batteries to the main unit and the transmitter
respectively.

- Turn on the main unit and then the receiver. Slide the power
switch located on the side of the unit, to ON position

- The opposite side of the main unit and the remote pager is the
alarm switch. Slide to ON position to turn on.

- Insert probe into main unit.

- If the receiver failed to receive signal from the transmitter, the
“RANGE OUT” icon will appear and the beeper will sound. Press
any key to stop alarm. To disable the alarm, please slide the alarm
switch to OFF

2. Setting Up Clock & Thermometer for the main unit:

Press the MODE button to display clock
Hold the MODE button for 3 seconds until the time flash, press HR
and MIN to adjust
Press MODE to confirm
Press HR or MIN to select 12 or 24 hour mode

Press MODE to confirm
Press HR or MIN to select C or F
Press MODE to confirm and exit

3. Setting up clock for Remote Pager

Press MODE button to select clock display
Hold MODE key 3 second until time flash
Press HR, MIN to adjust time
Press MODE to confirm or exit

4. To Set Temperature for the main unit:

Press the MODE button to display clock
Press + or – to adjust the desired temperature. Fast advance feature
available. Hold + or – down for 2 seconds to activate fast advance.
Press MODE to confirm

5. To Set Timer for the main unit:

Press the MODE button to display timer
Press HR or MIN to enter desired count down time. Fast advance
feature available.
Press HR or MIN down for 2 seconds to activate fast advance.
Press Start/Stop to start and stop timer.
To reset timer, stop the timer then press HR and MIN at the same time.

6. To set the timer on the Remote Pager

Press the MODE button to display timer
Press HR or MIN to enter desired count down time.
Press HR or MIN down for 2 seconds to activate fast advance.
Press Start/Stop to start and stop timer.
To reset timer, stop the timer then press HR and MIN at the same time.

The Main Unit will sound an alarm when the probe is at the
desired temperature or when the count down timer is complete.

The remote pager will sound an alarm when 4 different situations
occur: when the remote pager and the main unit is out of range,
when the main unit probe is at the desired temperature, when the
main unit count down timer is complete, or when the remote
pager count down timer is complete. Note: The main unit count
down timer and remote pager count down timer is not synchro­nized and therefore the alarm on the remote pager will sound

when the main unit count down timer is complete OR when the
remote pager count down timer is complete.

Meat-Taste temperature table is printed on the back of the main
unit.

TO SAVE BATTERIES PLEASE TURN POWER TO OFF
AFTER USE.

Trade Name:
Model Number: 00869SBCA

LIMITED WARRANTY Should this product from the Chaney
Instrument Co. prove to be defective in material or workman­ship within one year of original purchase it will be repaired or
replaced. This warranty does not cover damage in shipment or
failure caused by tampering, carelessness or abuse.

Chaney Instrument Company
965 Wells Street
Lake Geneva, Wisconsin 53147
Toll-free 24-hour support hotline: [phone]

Visit our website at www.acurite.com.