Activeforever Aqua Creek Beach Access Wheel Chair User Manual

ASSEMBLY AND

OPERATING INSTRUCTIONS

BEACH ACCESS CHAIR

250 LB. MAXIMUM CAPACITY

MANDATORY –LEAVE THIS MANUAL WITH OWNER

- READ CAREFULLY-

Check entire box and inside all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the figures and parts listed in this document. It is critical that all
parts be carefully inspected by the installer prior to installation to ensure that no damage occurred in
transit and that a damaged part is not used. Proper installation cannot be overstressed, as an improper
installation voids Aqua Creek’s warranty and may affect the safety of the user.

AQUA CREEK PRODUCTS

9889 GARRY MORE LANE

MISSOULA, MT 59808

1-888-687-3552

FAX: [phone]

WARNING

1. DO NOT USE BEACH ACCESS CHAIR WITHOUT CHECKING TIRES
FOR PROPER INFLATION PRESSURE. CHAIR MAY BE UNSTABLE
OR UNSAFE IF TIRE PRESSURE IS TOO LOW OR TOO HIGH.

2. NEVER OPERATE THE BEACH ACCESS CHAIR IN WATER. THIS
PRODUCT IS NOT A FLOTATION DEVICE.

3. SAVE A COPY OF THESE INSTRUCTIONS.

1

ASSEMBLY INSTRUCTIONS:

The Beach Access Chair comes fully assembled on a crate. All the user needs to do is to
check the tire inflation, assemble the umbrella and install it on the chair. The instructions
below explain how this is done.

PARTS LIST:

CRATE 1

1. BEACH ACCESS CHAIR

2. UMBRELLA & UMBRELLA POLE

UNLOADING THE CRATE:

The shipping crate is held together with wood screws. Remove the screws and open the
crate as shown in photos 1 and 2.

PHOTO 1: SHIPPING CRATE PHOTO 2: CRATE OPEN

2