ACTi SMAX-0151 User Manual

2013/12/09

Indoor PTZ

Mounting on a Straight Wall
Using Accessory Sets

Installation Guide

For Models:

I91, I92, KCM-8111

www.acti.com

Installation Guide

Table of Contents

Mounting Accessory Set Solutions .................................. 3

Heavy Duty Wall Mount with PTZ Mount Kit

Installation Procedures ..................................................... 4

Step 1: Drill the Holes ................................................................................ 4

Step 2: Install the Heavy Duty Mount ....................................................... 5

Optional: Add Extension Tube(s) ............................................................. 5

Step 3: Install the Mount Kit (PMAX-0110) ............................................... 6

Step 4: Install the Camera ......................................................................... 7

Step 5: Access the Camera Live View ...................................................... 8

Appendix ............................................................................. 9

How to Install Extension Tubes ................................................................ 9

Safety Information ............................................................ 10

2

www.acti.com

Installation Guide

Mounting Solution

Cabling Solution

Must Drill a Hole

on the Wall

Heavy Duty Wall Mount
with PTZ Mount Kit

(SMAX-0151)

Cables can pass through a
hole on the wall or go along
the wall through the bottom
conduit hole on the wall
mount.

Yes / No

PMAX-0305 PMAX-0110

Mounting Accessory Set Solutions

The mounting accessory set below can be used to install the camera on a straight wall.

3

www.acti.com

Installation Guide

Heavy Duty Wall Mount with PTZ Mount
Kit Installation Procedures

Perform the following procedures to install the camera on a straight wall using the Heavy Duty
Wall Mount. The cables can pass through the wall or go along the wall and enter the wall mount
from its bottom hole.

Step 1: Drill the Holes

Using the drill template (included in the Heavy Duty Wall Mount package), mark and drill the
screw holes. If the cables will pass through the wall, drill the conduit hole as shown on the drill
template.

4