ACTi SET-16-TCD-2100-1-RMK-3000, SET-8-TCD-2100-1-RMK-2000, SET-8-TCD-2100-1-RMK-3000 User Manual
TCD-2100
1-channel H.264 Video Encoder
Hardware Manual
(DC 12V)
Ver. 2013/07/02
www.acti.com
TCD-2100 Hardware Manual
Table of Contents
Precautions 3
Safety Instructions ........................................................................... 4
Introduction 6
Package Contents ............................................................................. 6
Physical Description ........................................................................ 7
Basic Connections ......................................................................... 10
Serial Port Connection ................................................................. 11
Accessing the Device 13
Configure the IP Address ............................................................... 13
Access the Device .......................................................................... 17
2
www.acti.com
TCD-2100 Hardware Manual
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
FCC/CE Regulation
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the users will be required to correct the
interference at their own expense.
3
www.acti.com
TCD-2100 Hardware Manual
Safety Instructions
Don’t use the power supply with other voltages
If you use a power supply with different voltage than the one included with this device, this
device may be damaged or inflict damage upon other equipments / personnel. All warranty of
this product will be voided in the situations above.
Don’t open the housing of the product
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device and the power supply in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to
qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4
www.acti.com
TCD-2100 Hardware Manual
4) If the video product does not operate normally by following the operating Instructions in
this manual. Adjust only those controls that are covered by the instruction manual, as an
improper adjustment of other controls may result in damage, and will often require
extensive work by a qualified technician to restore the video product to its normal
operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
5
www.acti.com
TCD-2100 Hardware Manual
Introduction
Package Contents
TCD-2100 Power Adaptor (Optional)
Mounting Screws Terminal Blocks (Power, Serial, DI/O)
Warranty Card
6
Loading...