Face Recognition Reader
Quick Start Guide
R21CF-30, R21CF-31, R21CF-32, R21CF-33
2019/08/02
www.acti.com
Quick Start Guide
Current date and time
Standalone Mode
button
Current Operating Mode:
1:N Identification
(1 to Many)
Keypad to enter User ID
for 1:1 verification
Thank you for using ACTi Face Recognition Reader. This documentation contains information on
the quickest way to enroll users on your device.
NOTE: The accuracy of the analytics algorithm may be affected by different environmental
factors or inappropriate installation. Please follow the procedures in this guide. ACTi will
not be held liable for inaccuracies resulting from the aforesaid causes.
Standalone Mode Enrollment
Face Enrollment
In Standalone Mode, you can use touch screen to perform enrollment and system configuration
without the need of network connection.
1. Once powered up, the device shows below the screen below.
2
www.acti.com
Quick Start Guide
Default Root Passcode:
1234 Mode button
Select “User” page
Start “User Manager”
2. Press the Standalone Mode button, then enter Root Passcode (default:
1234, followed by Enter Key) to enter.
3. Once authenticated, point to the “User” page to start “User Manager”.
3
www.acti.com
Quick Start Guide
“Enrollment” page
Click button to open
on-screen keyboard for
user ID/name editing
4. Select the Enrollment page and fill in user information. Steps are:
Enter User ID from on-screen keypad or badge a card to read card ID
User Name and Alias ID are optional
For security purposes, it is suggested to enroll at least one Root User
For user who wears glasses, check “Wear Glasses”
Click “Start Enrollment” to start
4
www.acti.com
Quick Start Guide
Operating distance:
45~70 cm
When face is locked in green square box,
enrollment proceeds
5. The system now goes into Enrollment mode and start a 3-second countdown.
The user is required to stand in front of the device and position the face
properly.
6. During the enrollment, gently tile the face up and down, then gently move
closer and farther. If you wear glasses, you will be asked to remove the glasses
half way through the enrollment.
7. Follow the screen message and voice instructions to complete the enrollment.
5
www.acti.com
Quick Start Guide
Green bar shows how
close the user to be
identified
Passed
score
Enrolled
picture with
user info
Quick Recognition Test
1. Only enrolled user can be recognized. If user has not been enrolled, please refer to
Section B and perform user enrollment.
2. If the device is set to 1:N mode, simply approach to the machine to start authentication.
Like enrollment, recognition will occur only when the face is locked at Green square
box. User who is identified will be granted with a green check and a voice welcome.
6
www.acti.com
Quick Start Guide
Under 1:1 mode, enter
User ID and Enter key to
start verification
3. If the device is set to 1:1 mode, user must scan a card or enter user ID from the touch
screen first before the device could perform facial recognition.
4. If face is not locked at green square box, please move a little closer or farther from the
device and gently nod head up and down. Recognition should occur.
7
www.acti.com
Quick Start Guide
Select “Settings” page
Press “Configurations”
Accessing the Configurations
1. Press the Standalone Mode button, and enter root passcode to enter Standalone Mode.
If a root user is already registered, you need the root user face to be verified before
entering.
2. Select the Settings page, then press “Configurations” button
8
www.acti.com
Quick Start Guide
Select Operating Mode:
1:N or 1:1 here
Adjust Threshold of facial
recognition if necessary
Press to leave
Standalone Mode
3. Configurations are divided into multiple pages, for instance, you can configure operating
mode (1:N or 1:1 mode) and recognition threshold at Facial Recognition page.
4. Press “Submit” button for the changes to take effect.
5. Then press the upper-right arrow to leave Standalone Mode.
9
Copyright © 2018, ACTi Corporation All Rights Reserved
7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, Taipei, Taiwan 114, R.O.C.
TEL : +886-2-2656-2588 FAX : +886-2-2656-2599
Email: sales@acti.com
Loading...