ACTi Q960, Q961 Installation Guide

People Counting Camera

Installation Guide

Q960, Q961, Q962

2019/08/02

www.acti.com

INSTALLATION GUIDE

Model

Installation

height

（m/ft）

Max. counting

width

（m/ft）

Without

doorframe

With doorframe

Q960

2.5/8.2

1.8/5.9

Placed in the middle

0.68m(2.2ft)

to door

Placed in the middle

3.0/9.8

2.9/9.5

Placed in the middle

1.1m(3.6ft)

to door

Placed in the middle

3.5/11.5

4.0/13.1

Placed in the middle

1.52m(5.0ft)

to door

Placed in the middle

Q961

3.0/9.8

2.2/7.2

Placed in the middle

0.85m(2.8ft)

to door

Placed in the middle

3.5/11.5

3.1/10.2

Placed in the middle

1.17m(3.8ft)

to door

Placed in the middle

4.0/13.1

4.0/13.1

Placed in the middle

1.5m(4.9ft)

to door

Placed in the middle

Q962

4.0/13.1

2.8/9.2

Placed in the middle

1.05m(3.4ft)

to door

Placed in the middle

4.5/14.8

3.4/11.2

Placed in the middle

1.28m(4.2ft)

to door

Placed in the middle

5.0/16.4

4.0/13.1

Placed in the middle

1.5m(4.9ft)

to door

Placed in the middle

The following documentation covers the installation and configuration of your
device.

NOTE: The accuracy of the analytics algorithm may be affected by different

environmental factors or inappropriate installation. Please follow the
procedures in this installation guide. ACTi will not be held liable for
inaccuracies resulting from the aforesaid causes.

Part 1: Installation Specification

1.

Model and counting width

The counting width depends on the installation height. The recommended
installation height for dual-lens camera is less than 4.0m (13.1ft). The specific
corresponding relation shown below:

2

www.acti.com

Camera

Mounting Base

Quick Start Guide

Screw Kit

Quick Start

Guide

2.

Package Contents

INSTALLATION GUIDE

3

www.acti.com

INSTALLATION GUIDE

Vertical sketch map of mounting position

Part 2: Installation Steps

1. Installation

Please pay great attention to the mounting position. Inappropriate mounting
position may cause loss of accuracy. The recommended mounting position is
shown below:

Horizontal sketch map of mounting position

Effect picture after installation

Notice: Avoid the reflective environment (ex: Marble floor)

4