ACTi PMON-1001 Installation Guide
Camera Installation Kit
PMON-1001
Product Manual
Ver. 2012/02/06
www.acti.com
PMON-1001 Product Manual
Table of Contents
0. Precautions 3
1. Introduction 4
Package Contents ........................................................................... 4
Design Concept ............................................................................... 6
Safety Instructions .......................................................................... 7
Physical description ........................................................................ 9
Product Specification .................................................................... 13
2. Using PMON-1001 14
Assembly ....................................................................................... 14
Operational Flow .......................................................................... 15
Using Multiple PMON-1001 in Same Area .................................... 18
2
www.acti.com
Wi-Fi AP
Charger
Battery
CE
EN 300 328(2.4-2.4835GHz)
EN 301 489
EN 61000-6-1
CE
EN 55022/EN 61000-3-2
EN 55024
UN38.3
UL 1642
FCC
Part15 B
FCC
Part15 B
PMON-1001 Product Manual
0. Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service PMON-1001, charger or battery yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
FCC/CE Regulation
NOTE: This equipment is a service pack with PSE board and several purchasing parts. Every
purchasing part has been tested and found to comply with mandatory limits as below table.
3
www.acti.com
PMON-1001 Product Manual
PMON-1001
ANTENNA
BATTERY
CHARGER
BELT BAG
QUICK INSTALLATION GUIDE
1. Introduction
Package Contents
4
www.acti.com
PMON-1001 Product Manual
5
www.acti.com
PMON-1001 Product Manual
Design Concept
Camera Installation Kit PMON-1001 is a light
on-the-belt hardware utility that connects to the IP
camera and provides PoE power through a short
network cable while providing wireless network
access for iPhone or iPod Touch that has a free app
"CameraGo!" installed.
With the help of this installation kit it is possible to do
convenient and time-saving viewing angle and focus
adjustment of ACTi cameras without needing to bring
a notebook computer up on the ladder with the long
cable attached or ask someone on the ground for
assistance.
Architecture of Camera Installation Kit
The following chapters of this manual describe the hardware and firmware of the PMON-1001
device. For more details about software application CameraGo!, please refer to its user
manual.
6
Loading...