ACTi ECD-1000 User Manual
1 2 3 4 5 6
1
Power LED
2
System Ready LED
Reset Button /
3
NTSC and PAL Switch
4
DC 12V Power Connector
Before You Start
This guide contains all the information you need to quickly setup
the Media Display Station via local display interface. For detailed
information on installations or operations, please refer to the Hardware
Manual or User’s Manual on the ACTi website (www.acti.com).
Before installation, prepare the following equipment:
1. Monitor (HDMI 1080p or Composite input)
2. HDMI cable or Video cable with BNC connector
3. RJ-45 network cable
4. Network switch
5. USB mouse
7
8
6. USB keyboard (optional)
7. Screwdriver
Step 2: Mount the DeviceDevice Overview
The device can be mounted in three ways: Surface mount, Pole Mount or
VESA Mount.
How to Surface Mount?
1. Using the supplied drill template, drill 4 holes on the surface.
2. Attach the 4 supplied screws to secure the device.
How to Use the Pole Mount?
1. With the smooth side
outwards, insert the cable
staps through the holes
(A-B-C-D).
NOTE:
• Use the inner A and D
holes if mounting on a
pole with 1” diameter or
the outer holes for a 2”
diameter pole.
2. Align the pole mount to the
pole.
C
B
D
A
3. Insert the cables through
the latches and push all the
wayuntiltheytsnuglyto
the pole.
4. Align the device to the
mount with the Ethernet
port side up and HDMI port
side down.
5. Secure the 4 supplied bolts
to attach the device to the
mount.
5
6
7
USB Port
Ethernet Port
HDMI Port
Step 1: Unpack the Device
Check if the package comes with the following items:
1. Video Decoder
2. Screw Pack
3. Cable Straps
4. Mounting Bracket
How to Use VESA Mount?
1. Place the device in between a VESA mount (10 x 10) and the
monitor, with the top side of the device facing the monitor while
the bottom side facing the VESA mount.
2. Attach the 4 supplied bolts to secure the device.
5. Power Adaptor
8
Composite Port
6. Terminal Block
Step 3: Connect the Device
The diagram below demonstrates a
connection setting example within a
local network.
Step 5: Login
1. Click to access the Setup page.
2. When prompted to login, enter the Account and Password, then click
Login.
Step 7: Add Cameras
1. On the Setup page,
click Camera > Search
Cameras.
Monitor
Power Source
(optional)
USB Mouse
NOTE: A USB hub can be
used to connect more USB
devices such as a keyboard.
192.168.0.100 192.168.0.101 192.168.0.102 192.168.0.103
PoE Switch
(HDMI or Analog)
Default IP Address:
192.168.0.200
Step 4: Access the Device
Once all devices are connected, turn on the monitor to see the Live View
screen. Move the mouse over the IP address to display the main menu.
Default
Account: admin
Password: 123456
Numeric Keypad
Enter
Step 6: Change the IP Address
If your network has a DHCP server, the device will obtain the IP address
automatically by default. Skip to Step 7: Add Cameras.
If you want to assign a different static IP address, change the IP address
manually.
1. Click Network > Network Connection.
2. On Connection Type, select Manual.
3. Set the IP address
and Subnet Mask.
4. Click Save.
2. Click one or more
cameras, then click Add.
3. Click to close the
Setup page. The Live
View screen appears
with the added cameras.
For more detailed instructions, please refer to the “Product Manual”
downloadable from the website (www.acti.com).
Quick Installation Guide
ECD-1000
V.2015.07.16
www.ac.com
Loading...