Page 1
multi-action toothbrush
Register your product at:
www.acteh.com/register
To reorder toothbrush heads, please visit:
www.acteh.com/heads
15% of your next order at
www.acteh.com/store
code: 0X28MJ
ENGLISH
USER MANUAL
Page 2
IMPORTANT SAFEGUARDS -------------------------------- PAGE 2
COMPONENTS ------------------------------------------------- PAGE 3
CHARGING YOUR JET TOOTHBRUSH -------------------- PAGE 4
USING YOUR JET TOOTHBRUSH ------------------------ PAGE 5
BRUSHING MODES ------------------------------------------ PAGE 6
CLEANING YOUR TOOTHBRUSH ------------------------ PAGE 7
REPLACING A TOOTHBRUSH HEAD -------------------- PAGE 8
WARRANTY AND SUPPORT -------------------------------- PAGE 9
TABLE OF CONTENTS
Page 3
Read all instructions before use - Save these instructions
Basic safety precautions should be taken when using any electrical product:
Danger
To reduce the risk of electrocution:
- Never force the plug into an outlet; if the plug does not easily fit into the
outlet, discontinue use and contact the manufacturer. (As a safety feature, this
appliance has a polarized plug and will fit into a polarized outlet in only one
way.)
- Place and store the charging base at a safe distance from water and other
liquids.
- If the charging station falls into water, unplug immediately.
- Do not reach for a product that has fallen into water.
- Never use a charging station with a damaged cord or plug.
Warnings
To reduce the risk of physical injury and to prevent product damage:
- Do not use attachments other than those recommended by the manufacturer.
- Do not plug the charging base into an outlet with a voltage other than the
voltage specified at the bottom of the charging station.
- Discontinue use if the product appears damaged in any way.
- The charging station and toothbrush handle contain no user-serviceable parts.
- This appliance is not intended for use by children or individuals with reduced
physical capabilities.
- Children should be supervised to ensure they do not play with the appliance.
Medical Warnings
- Consult your dental professional before use of this product, especially if you
have had oral or gum surgery in the past 2 months.
- Discontinue use of this product and contact a physician/dentist if you
experience discomfort or pain.
- If you have a pacemaker or other implanted device, contact a physician or
device manufacturer prior to use of this product.
IMPORTANT SAFEGUARDS
2
Page 4
Components:
1 - Toothbrush Heads
2 - Toothbrush Handle
3 - Toothbrush Control Panel
4 - Power on/off button
5 - Mode Selector
6 - Charging/Operating Indicator
7 - Charging Station
8 - Power Cord
The contents of the box may vary based on the promotional model purchased.
3
COMPONENTS
1
2
3
4
5
6
7
8
Page 5
4
CHARGING YOUR JET TOOTHBRUSH
Charging your toothbrush
Charge your toothbrush for 24 hours before first use.
This toothbrush will operate for up to 6 weeks on a single full charge.
- Place the toothbrush handle on the charging station.
Then plug the power cord into an electrical outlet.
- Before each charging session, the lights will circle counterclockwise
for 5 seconds to indicate the remaining battery level.
- The circle indicators consist of 4 lights,
each equivalent to 25% of the total battery charge.
- 4 solid lights equal 100% of the remaining battery life.
4 rotating lights <25%
3 rotating lights - lower-left light is solid <50%
2 rotating lights - both lower lights are solid <75%
Upper left light is blinking - 3 remaining lights are solid <95%
4 lights are solid100%
Page 6
5
USING YOUR JET TOOTHBRUSH
Using your toothbrush
- Attach the toothbrush head to the toothbrush handle (Fig.1), leaving a small
gap (about 1mm.) between the two.
- Use your favorite brand of toothpaste.
- Guide the brush head slowly from one tooth to another in a small
back-and-forth motion.
- Brush the gums as well.
- Do not scrub.
- A 2-minute timer with a 30-second pause will remind you of when it is time to
brush another section of your mouth.
This toothbrush can also be used by children over 12 years of age if they are
supervised or given instructions on the safe use of the appliance. They must
understand the hazards involved.
Cleaning and user maintenance shall not be performed by children without
adult supervision.
Fig.1
Page 7
Toothbrush brushing modes
CLEAN - up to 31,000 motions per minute, 3mm amplitude*.
Ultimate plaque removal.
WHITE - up to 41,000 motions per minute, 6mm amplitude*.
Extra power to help brighten and polish your teeth.
POLISH - up to 48,000 motions per minute, 3mm/4mm amplitude*.
Mode to polish your front teeth.
MASSAGE - up to 31,000 motions per minute, 1mm to 3mm amplitude*.
Gentle mode for sensitive teeth and gums. Great for gum stimulation.
CUSTOM - up to 41,000 motions per minute, 2mm to 6mm amplitude*.
How to switch between brushing modes
Keep pressing ‘mode’ button to switch between brushing modes.
Jet's Custom Mode offers five different vibration amplitudes for a personalized
cleaning experience. To select the desired custom brushing mode, power on your
toothbrush, then select 'custom' brushing mode by pressing the 'mode' button.
Press and hold the 'on/off' button for 3 seconds until the 'custom' light blinks 3
times. Continue holding the 'on/off' button, then release at the preferred custom
setting.
Jet toothbrush will power-on in the brushing mode used at the last brushing
cycle.
Autotimer
This toothbrush is designed to reach the dentist-recommended brushing time
of 2 minutes, with a pause auto-alert reminder every 30 seconds to change
brushing areas.
Rotating light indicators will also inform you of remaining brushing times.
After every 30 seconds of brushing, the corresponding individual light
indicator will activate. After 2 minutes of brushing, all 4 lights will blink and
the device will stop automatically.
30
seconds
60
seconds
90
seconds
2
minutes
6
BRUSHING MODES
* of vibration
Page 8
Cleaning your toothbrush and toothbrush heads
- Clean your toothbrush regularly.
- Rinse the handle and the brush head thoroughly under running water.
- Remove the brush head from the handle and clean it separately (Fig.2).
- Wipe it dry.
Cleaning your charging station.
- DO NOT clean the charging station by immersing it in running or still water
(Fig.3).
- Before cleaning your charging station, make sure to unplug it from the
electrical outlet.
- Use ONLY a dry or damp-dry cloth to wipe the surface of your charging station.
- Place the charging station onto a dry and safe surface until is completely dry.
Fig.2
Fig.3
7
CLEANING YOUR JET TOOTHBRUSH
Page 9
Toothbrush head replacement instructions
Replace your JET toothbrush head regularly, especially after illness,
or whenever the bristles start to fray.
- Lift the toothbrush handle from the charging station.
- Securely hold the toothbrush handle with one hand. Then firmly pull the
toothbrush head with the other hand (Fig.4).
- Clean the toothbrush handle including the toothbrush connector pin.
- Securely hold the toothbrush handle with one hand. Then firmly press the
toothbrush head down with the other hand (Fig.5) (note: there should be
about 1mm. space between the toothbrush handle and the toothbrush head).
Fig.5
Fig.4
8
REPLACING A TOOTHBRUSH HEAD
Page 10
12-month limited warranty
The JET toothbrush is guaranteed to be free of manufacturing defects for one
year after the date of purchase. Proof of purchase is required.
Warranty exclusions:
- Accidental damage, misuse, or tampering with the product.
- Brush heads.
- Damage caused by the use of unauthorized replacement parts.
SUPPORT:
http://www.acteh.com/support
If you have any questions or concerns, please contact: [email protected]
SPECIFICATIONS:
Model: JET
Power: 0.9 - 1.3W
Input: 100-240VAC 50-60Hz
Serial No.: Listed at the bottom of charging station.
Compliance Information
This toothbrush conform to the applicable provisions of applicable US Federal
requirements, including 21 CFR, Chapter1, Subchapter J, Radiological Health
Conform to UL STD.1431
Certified to CSA STD.C22.2 NO.68
9
WARRANTY AND SUPPORT
Loading...