Acson RCM 20 D, RCM 25 D, RCM 30 D, RCM 40 D, RCM 50 D user guide manual

...

Download

Ceiling Exposed

Split Systems

ISO 9002

REGISTERED

RCM-2004

RCM20 D/DR RCM25 D/DR RCM3

0 D/DR

RCM4

0 D/DR

RCM5

0 D/DR

RCM6

1 C/CR

RCM6

2C/CR

Models:

1. SPECIAL FEATURES ................................................................................................. 2

2. SPECIFICATIONS ....................................................................................................... 3

3. NOISE LEVEL ........................................................................................................... 15

4. OPERATION RANGE ................................................................................................ 19

5. REFRIGERANT CIRCUIT .......................................................................................... 20

6. PERFORMANCE TABLE ........................................................................................... 24

7 OUTLINES AND DIMENSIONS.................................................................................. 37

8. WIRING DIAGRAMS ................................................................................................ 41

9. SPECIAL PRECAUTIONS FOR R407C ................................................................... 63

10. INSTALLATION ....................................................................................................... 65

11. REMOTE CONTROL OPERATION GUIDE ............................................................ 76

12. SERVICE AND MAINTENANCE ............................................................................. 79

13. TROUBLESHOOTING ............................................................................................. 81

14. PARTS LIST ............................................................................................................ 87

CONTENTS

ULTRA SLIM NEW STYLISH DESIGN PROFILE

This unit is contemporary in design and match even the most up to date interior decor. The slim, round profile and compact design of this unit adds a touch of elegance to every decor. No indoor connection pipe and hanger bracket are visible.

CEILING AND FLOOR CONVERTIBLE WITH SPACE SAVING INSTALLATION

This unit is designed for ceiling exposed type and floor exposed type with a very economical and space saving installation. No need renovation to wall or ceiling for ceiling exposed and no foundation work is required for floor exposed installation. This easy to install and ready to operate unit ensure rapid and low installation cost.

STRONG AND ROBUST

The unit is built from strong casing material and robust parts to ensure long lasting reliable service. The drain pan is made from the POLYSTYRENE with a plastic coating on the surface to ensure no leaking and no condensation occur.

FRIENDLY SERVICEABILITY

The air filter, electrical parts, fan and fan motor assembly can all be inspected and replace from bottom of the unit by simply removing the newly designed press in, pull out air intake grille. The POLYSTYRENE drain pan and the heat exchanger coils can remove from the unit easily by remove the bottom panel.

MICROCOMPUTER REMOTE CONTROLLER

The incorporated microprocessor give more accurate control and with the following extra features:

• Fan motor speed can be set at high/medium/low and automatic.

• Timer on/off - the unit can be pre-set to on and off automatically.

• Electronic thermostat - room temperature is precisely controlled resulting in energy saving and increase comfort.

• Sleep mode automatically increase set temperature since room temperature is lower at night thus achieving healthy sleep.

WIRELESS REMOTE CONTROLLER

The compact wireless remote controller makes it possible to operate the air conditioner anywhere within the room.

AUTO OR MANUAL CONTROL ON VERTICAL AIRFLOW DIRECTION

With auto control, the louver will automatically swing up and down to create an excellent air distr bution. You can select your desired horizontal air flow direction by adjusting the vertical grille.

1. SPECIAL FEATURES

2. SPECIFICATIONS

COOLING ONLY (R22)

MODEL INDOOR UNIT

RCM 20D RCM 25D RCM 50D

OUTDOOR UNIT

ALC 20B ALC 25B ALC 30B ALC 30C ALC 35C ALC 40C ALC 50C

NOMINAL kcal/h

5040 6300 7056 7560 8820 10080 12600

COOLING W

5862 7327 8204 8792 10258 11723 14654

CAPACITY Btu/h

20000 25000 28000 30000 35000 40000 5 0000

W (50Hz)

2309 [ 2179 ] 2973 [ 2823 ] 3068 295 0 [ 3423 ] 3466 [ 396 7 ] [ 5424 ]

W (60Hz)

2189 2956 - 3860 - [ 4658 ] [ 5868 ]

A (50H z)

11.0 [ 4.0 ] 14.9 [ 5.2 ] 15.5 14.4 [ 5.8 ] 16.9 [ 6.5 ] [ 9.0 ]

A (60H z)

10.0 13.7 - 18.3 - [ 12.6 ] [ 15.4 ]

POWER SOURCE V/Ph/Hz

REFRIGERANT / CONTROL

AIR F LOW cfm / L/s

590 / 278 660 / 312 1110 / 524

50 Hz

4 POLES x 45W 4 POLES x 95W 4 POLES x 145W

60 Hz

4 POLES x 45W 4 POLES x 95W 4 POLES x 140W

RATED INPUT POWER W (50/60Hz)

96 / 114 130 / 155 240 / 337

RATED RUNNING CURRENT A (50/60Hz)

0.40 / 0.50 0.58 / 0.70 1.04 / 1.50

MATERIAL

S.I.G.C

DIAMETER mm/in

THICKNESS mm/in

MATERIAL

THICKNESS mm/in

ROW

33 4

FIN PER INCH

12 12 12

FACE AREA

/ft

0.19 / 2.06 0.19 / 2.06 0.36 / 3.95

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg

43 43 70

SOUND PRESSURE LEVEL ( H / M / L ) dBA

50 / 47 / 40 54 / 53 / 50 54 / 53 / 52

ROOM TEMPERATURE

CONTROL AIR DISCHARGE

OPERATION

CONDENSATE DRAIN SIZE mm/in

AIR FILTER

PACKING HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

INDOOR UNIT

COIL

TUBEFIN

FAN

FAN MOTOR

760 / 29.9 760 / 29.9

4 POLES x 95W

132 / 179

0.58 / 0.80

1214 / 47.80

ALUMINIUM

0.24 / 2.58

249 / 9.80

19.05 / 3/4

WASHABLE SARAN NET (OPTIONAL IONIZER FILTER)

670 / 26.30

51 / 50 / 48

4 POLES x 95W

R22 / CAPILLARY TUBE IN OUTDOOR

S.B.C. S.I.G.C

0.11 / 0.0043

LCD WIRELESS / LED WIRED MICROCOMPUTER REMOTE CONTROL

0.36 / 3.95

214 / 8.42

1214 / 47.80

670 / 26.30

249 / 9.80

1714 / 67.40

54 / 53 / 52

MICROCOMPUTER CONT ROLLED THERMOSTAT

AUTOMATIC LOUVER (UP & DOWN) & MANUAL LOUVER (BOTTOM)

670 / 26.30

345 / 13.6

1361 / 53.51311 / 51.6

301 / 11.9

RCM 40D

220 - 240 / 1 / 50, 208 - 230 / 1 / 60

R22 / CAPILLARY TUBE IN INDOOR

1110 / 524

RCM 30D

730 / 345

4 POLES x 145W

4 POLES x 140W

240 / 337

1.04 / 1.50

S.B.C

9.52 / 3/8

0.35 / 0.014

ALUMINIUM (HYDROPHILIC TYPE)

345 / 13.6

1816 / 71.4

760 / 29.9

NOMINAL TOTAL POWER - 1∅ [ 3∅ ]

NOMINAL TOTAL CURRENT - 1∅ [ 3∅ ]

V/Ph/Hz

COMPRESSOR TYPE

CAPACITOR - µF

50 Hz

45 / < NIL > 45 / < NIL > 50 45 / < NIL > 35 NI L NIL

1∅ / < 3∅ >

60 Hz

40 (35) - 45 - NIL NIL

LOCK ROTOR AMPERE - A 50 Hz

56 / < 21.4 > 56.5 / < 24.9 > 66 85 / < 39 > 82 45 62

1∅ / < 3∅ >

60 Hz

37 (70) - 88 - 78 106

RATED RUNNING CURRENT - A 50 Hz

10 / < 3.7 > 13.8 / < 4.8 > 14.2 12.7 / < 5.2 > 14.8 5.8 8.3

1∅ / < 3∅ >

60 Hz

8.75 (12.26) - 16.3 - 11.7 14.5

RATED INPUT POWER - W 50 Hz

2080 / < 1950 > 2710 / < 2560 > 2770 2577 / < 3050 > 2985 3486 4943

1∅ / < 3∅ >

60 Hz

1909 (2635) - 3420 - 4040 5270

PROTECTION DEVICE

POWER SOURCE V/Ph/Hz

FAN TYPE / DRIVE

BLADE MATERI AL

DIAMETER mm/in

50 Hz

0.7

60 Hz

-1.23 -

50 Hz

60 Hz

-145 -

50 Hz

166

60 Hz

-261 -

MATERIAL

S.B.C S.I.G.C S.I.G.C

DIAMETER mm/in

THICKNESS mm/in

0.35 / 0.014

MATERIAL

THICKNESS mm/in

ROW

2112 2

FIN PER INCH

16 16 16 14 16

FACE AREA

/ft

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg

57 58 58 95 95 100 105

MATERIAL

CASING THICKNESS mm/in

FINISHING

SOUND PRESSURE LEVEL dBA

52 53 56 58 58 58 58

TYPE

SIZE LIQUID mm/in

6.35 / 1/4

GAS mm/in

15.88 / 5/8

PACKING HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

S.B.C

1.23

145

261

609.6 / 24.0

1.09

145

241

0.8 / 0.031

0.35 / 0.014

ALUMINIUM (CORRUGATED FIN TYPE)

0.127 / 0.005

GALVANISED MILD STEEL

850 / 33.46

1029 / 40.53

0.87 / 9.33

400 / 15.75

0.51 / 5.53

POLYESTER POWDER

FLARE VALVE

560 / 22.05

9.52 / 3/8

19.05 / 3/4

1000 / 39.37

1200 / 47.24

9.52 / 3/8

15.88 / 5/8

OVERLOAD PROTECTION AND MANUAL RESET HIGH/LOW PRESSURE SWITCH

220 - 240 / 1 / 50 , 208 - 230 / 1/ 60

PROPELLER / DI RECT

GLASS REINFORCED ACRYL STYRENE RESIN

200 - 230 / 3 / 60

220 - 240 / 1 / 50 / < 380 - 420 / 3 / 50 >

208 - 230 / 1 / 60

RECIPROCATING HERMETIC

380 - 420 / 3 / 50

OUTDOOR UNIT

RATED RUNNING CURRENT (A)

MOTOR OUTPUT (W )

RATED INPUT POWER (W )

PIPE FANCOIL

TUBE

420.0 / 16.5

ROTARY (RECIPROCATING) HERMETIC

461 / 18.15

710 / 27.95

957 / 37.68

646 / 25.40

840 / 33.10

330 / 13.00

ALUMINIUM (SLIT FIN TYPE)

9.52 / 3/8

0.56

166

133

0.76

0.36 / 0.014 AVE.

COMPRESSOR

POWER SOURCE

OVERLOAD PROTECTION

FIN

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON TH E CONDITIONS BELOW

a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R22)

MODEL INDOOR UNIT

RCM 20DR RCM 25DR RCM 50DR

OUTDOOR UNIT

ALC 20BR ALC 25BR ALC 30BR ALC 30CR ALC 35CR ALC 40CR ALC 50CR

NOMINAL kcal/h

5040 6048 6552 7560 8820 10080 12096

COOLING W

5862 7034 7620 8792 10258 11723 14068

CAPACITY Btu/h

20000 24000 26000 30000 35000 40000 48000

NOMINAL kcal/h

5292 6300 7056 8064 9072 10332 12096

HEATING W

6155 7327 8206 9379 10551 12016 1406 8

CAPACITY Btu/h

21000 25000 28000 32000 36000 41000 48000

W (50Hz)

2216 [ 2179 ] 2993 [ 2823 ] 3114 3016 [ 3273 ] 3433 4011 [ 3912 ] [ 5115 ]

W (60Hz)

2056 2806 - 3584 - 4 193 [ 5503 ]

W (50Hz)

2237 [ 2189 ] 2913 [ 2903 ] 2875 2935 [ 3129 ] 3342 3501 [ 3402 ] [ 4517 ]

W (60Hz)

2103 2740 - 3286 - 3 640 [ 4337 ]

A (50H z)

10.8 [ 4.0 ] 14.1 [ 5.2 ] 15.0 15.1 [ 5.6 ] 17.1 20.9 [ 6.7 ] [ 8.5 ]

A (60H z)

9.6 13.1 - 17.4 - 12.1 [ 15.7 ]

A (50H z)

10.8 [ 4.0 ] 13.8 [ 5.3 ] 14.3 14.6 [ 5.5 ] 16.5 19.0 [ 6.1 ] [ 7.9 ]

A (60H z)

10.0 12.9 - 16.3 - 10.9 [ 13.3 ]

POWER SOURCE V/Ph/Hz REFRIGERANT / CONTROL

AIR FLOW cfm / L/s

590 / 278 660 / 312 1110 / 524

50 Hz

4 POLES x 45W 4 POLES x 95W 4 POLES x 145W

60 Hz

4 POLES x 45W 4 POLES x 95W - 4 POLES x 95W 4 POLES x 140W

RATED INPUT POWER W (50/60Hz)

96 / 114 130 / 155 132 / - 132 / 179 240 / 337

RATED RUNNING CURRENT A (50/60Hz)

0.40 / 0.50 0.58 / 0.70 0.58 / - 0.58 / 0.80 1.04 / 1.50

MATERIAL

S.I.G.C

DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW

33 4

FIN PER INCH

12 12 12

FACE AREA

0.19 / 2.06 0.19 / 2.06 0.36 / 3.95

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg

43 43 70

SOUND PRESSURE LEVEL ( H / M / L ) dBA

50 / 47 / 40 54 / 53 / 50 54 / 53 / 52

ROOM TEMPERATURE

CONTROL AIR DISCHARGE

OPERATION CONDENSATE DRAIN SIZE mm/in AIR FILTER PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in

214 / 8.42

1214 / 47.80

670 / 26.30

249 / 9.80

1714 / 67.40

670 / 26.30

345 / 13.6

54 / 53 / 52

345 / 13.6

MICROCOMPUTER CONTROLLED THERMOSTAT

AUTOMATIC LOUVER (UP & DOWN) & MANUAL LOUVER (BOTTOM)

LCD WIRELESS / LED WIRED MICROCOMPUTER REMOTE CONTROL

19.05 / 3/4

301 / 11.9

WASHABLE SARAN NET (OPTIONAL IONIZER FILTER)

S.B.C.

9.52 / 3/8

0.35 / 0.014 ALUMINIUM (HYDROPHILIC)ALUMINIUM

4 POLES x 145W 4 POLES x 140W

240 / 337

1.04 / 1.50

RCM 40DR

220 - 240 / 1 / 50, 208 - 230 / 1 / 60

R22 / CAPILLARY TUBE & TXV IN OUTDOOR

1110 / 524

R22 / CAPILLARY TUBE IN OUTDOOR

S.B.C.

51 / 50 / 48

INDOOR UNIT

FIN

FAN

FAN MOTOR

TUBE

COIL

249 / 9.80

1214 / 47.80

670 / 26.30

0.11 / 0.0043

0.36 / 3.95

1212

0.24 / 2.58

4 POLES x 95W

S.I.G.C

RCM 30DR

730 / 345

1816 / 71.4

760 / 29.9

1361 / 53.5

760 / 29.9

1311 / 51.6

760 / 29.9

NOMINAL TOTAL POWER (COOLI NG) - 1∅ [ 3∅ ]

NOMINAL TOTAL POWER (HE ATING) - 1∅ [ 3∅ ]

NOMINAL TOTAL CURRENT (COOLING) - 1∅ [ 3∅ ]

NOMINAL TOTAL CURRENT (HEATING) - 1∅ [ 3∅ ]

380 - 420 / 3 / 50

220 - 240 / 1 / 50 / < 380 - 420 / 3 / 50 >

V/Ph/Hz

V/Ph/Hz COMPRESSOR TYPE CAPACITOR - µF

50 Hz

45 / < NIL > 45 / < NIL > 50 45 / < NIL > 35 40 / < NIL > NIL

1∅ / < 3∅ >

60 Hz

40 60 - 45 - NIL NIL

LOCK ROTOR AMPERE - A 50 Hz 56 / < 21.4 > 57 / < 24.9 > 66 85 / < 39 > 82 100 / < 45 > 62 1∅ / < 3∅ >

60 Hz

39.6 50 - 88 - 78 106

RATED RUNNING CURR. (COOLING) - A 50 Hz

9.84 / < 3.7 > 13.0 / < 4.8 > 13.7 13.4 / < 5.0 > 15.0 18.8 / < 6.0 > 7.8

1∅ / < 3∅ >

60 Hz

8.3 11.6 - 1 5.3 - 11.2 14.8

RATED RUNNING CURR. (HEATING) - A 50 Hz

9.84 / < 3.7 > 12.7 / < 4.9 > 13.0 12.9 / < 4.9 > 14.4 16.9 / < 5.4 > 7.2

1∅ / < 3∅ >

60 Hz 8.7 11.4 - 14. 2 - 10. 0 1 2.4

RATED INPUT POWER (COOLING) - W 50 Hz

1987 / < 1950 > 2730 / < 2560 > 2 816 2643 / < 2900 > 2952 3530 / < 3431 > 4 634

1∅ / < 3∅ >

60 Hz 1777 2486 - 3144 - 3595 4905

RATED INPUT POWER (HEATING) - W 50 Hz

2008 / < 1960 > 2650 / < 2640 > 2 577 2562 / < 2756 > 2861 3020 / < 2921 > 4 036

1∅ / < 3∅ >

60 Hz

1824 2420 - 2846 - 3042 3739

PROTECTION DEVICE POWER SOURCE V/Ph/Hz FAN TYPE / DRIVE BLADE MATERI AL DIAMETER mm/in RATED RUNNING CURRENT A (50/60Hz)

0.7 / - 1.09 / 1.25 1.09 / -

MOTOR OUTPUT W (50/60Hz)

80 / - 145 / 145 145 / -

RATED INPUT POWER W (50/60Hz) 166 / - 241 / 261 241 / -

MATERIAL

S.B.C S.I.G.C S.I.G.C S.B.C S.I.G.C. S.I.G.C S.I.G.C

DIAMETER mm/in THICKNESS mm/in

0.35 / 0.014 0.36 / 0.014 AVE. 0.36 / 0.014 AVE.

MATERIAL THICKNESS mm/in ROW

FIN PER INCH 16

FACE AREA

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg 57 58 58 95 95 100 105

MATERIAL

CASING THICKNESS mm/in

FINISHING

SOUND PRESSURE LEVEL dBA

52 53 56 58 58 58 58

TYPE SIZE LIQUID mm/in

6.35 / 1/4

GAS mm/in 15.88 / 5/8

PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in

200 - 230 / 3 / 60208 - 230 / 1 / 60

0.35 / 0.014 ALUMINIUM (CORRUGATED FIN TYPE)

133 / 165

15.88 / 5/8

0.36 / 0.014 AVE.

ALUMINIUM (SLIT FIN TYPE)

9.52 / 3/8

ROTARY HERMETIC

OVERLOAD PROTECTION

0.56 / 0.76 55 / 55

420.0 / 16.5

OUTDOOR UNIT

POWER SOURCE

PIPE COIL

TUBEFIN

FAN COMPRESSOR

710 / 27.95

850 / 33.46

1029 / 40.53

400 / 15.75

19.05 / 3/4

1000 / 39.37

FLARE VALVE

9.52 / 3/8

0.51 / 5.53

9.52 / 3/8

330 / 13.00

GALVANISED MILD STEEL

0.8 / 0.031

POLYESTER POWDER

RECIPROCATING HERMETIC

OVERLOAD PROTECTION AND AUTO RESET HIGH PRESSURE SWITCH

220 - 240 / 1 / 50, 208 - 230 / 1 / 60

PROPELLER / DIRECT

GLASS REINFORCED ACRYL STYRENE RESIN

609.6 / 24.0

1.09 / 1.25 145 / 145 241 / 261

1200 / 47.24

560 / 22.05

0.127 / 0.005 2

0.87 / 9.33

957 / 37.68 461 / 18.15

646 / 25.40 840 / 33.10

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CON DITIONS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR b) HEATING - 21.1 C DB / 15.6 C WB INDOOR AND 8.3 C DB / 6.1 C W B OUTDOOR

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C WB INDO OR AND 46.1 C DB OUTDOOR b) HEATING - 21.0 C DB I NDOOR AND -8.3 C DB / -9.4 C WB OUTDOOR TO

26.7 C DB INDOOR AND 23.9 C DB / 18.3 C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER G ROOVE COPPER

COOLING ONLY (R22)

MODEL INDOOR UNIT RCM 61C

OUTDOOR UNIT

ALC 61C

NOMINAL kcal/h

14110

COOLING W 16410 CAPACITY Btu/h

56000

NOMINAL TOTAL POWER W

5593

NOMINAL TOTAL CURRENT A 9.4

POWER SOURCE V/Ph/Hz

220 - 240 / 1 / 50

REFRIGERANT / CONTROL

R22 / CAPILLARY TUBE N INDOOR

AIR FLOW cfm / L/s 1550 / 732

HIGH

MED

LOW

FAN MOTOR

2 x 4 POLES x 80 W

RATED INPUT POWER W

327

RATED RUNNING CURRENT A

1.40

MATERIAL

S.I.G.C

DIAMETER mm/in

9.52 / 3/8

THICKNESS mm/in

0.35 / 0.014

MATERIAL

ALUMINIUM

THICKNESS mm/in

0.11 / 0 0043

ROW

FIN PER INCH

FACE AREA

0.42 / 4.51

HEIGHT mm/in

285 / 11 2

DIMENSION WIDTH mm/in 1874 / 73.8

DEPTH mm/in

666 / 26 2

WEIGHT kg

CONTROL ROOM TEMPERATURE MICROCOMPUTER CONTROLLED THERMOSTAT

OPERATION

LCD WIRELESS OR WIRED MICROCOMPUTER REMOTE CONTROL

CONDENSATE DRAIN SIZE mm/in

19 05 / 3/4

AIR FILTER WASHABLE SARAN NET PACKING HEIGHT mm/in

368 / 14 5

DIMENSION WIDTH mm/in

1992 / 78.4

DEPTH mm/in 760 / 29 9

POWER SOURCE V/Ph/Hz

415 / 3 / 50

COMPRESSOR TYPE

SCROLL

CAPACITOR µF LOCK ROTOR AMP. A

74.0

RATED RUNNING CURRENT A

8.5

RATED INPUT POWER W

5008

PROTECTION DEVICE

OVERLOAD PROTECTION / HI-LO PRESSURE SWITCH

POWER SOURCE V/Ph/Hz

220 - 240 / 1 / 50

FAN TYPE / DRIVE PROPELLER / DIRECT BLADE MATERIAL

GLASS R. ACRLY STYLENE RESIN

DIAMETER mm/in

600 / 24

RATED RUNNING CURRENT A

1.2

MOTOR OUTPUT W

400

RATED INPUT POWER W

258

MATERIAL

S.I.G.C

DIAMETER mm/in

9.52 / 3/8

THICKNESS mm/in

0.35 / 0.014

MATERIAL

ALUM NIUM (SLIT)

THICKNESS mm/in

0.127 / 0.005

ROW

FIN PER INCH 14

FACE AREA

0.84 / 9.04

HEIGHT mm/in

850 / 33 5

DIMENSION WIDTH mm/in 1030 / 40.6

DEPTH mm/in

460 / 18.1

WEIGHT kg

108

MATERIAL ELECTRO GALVANIZED M LD STEEL

CASING THICKNESS mm/in

1.0 - 2.3 (0.0393 -0.0905)

FINISHING

EPOXY POLYESTER POWDER COATING

SOUND PRESSURE LEVEL dBA 61

TYPE

FLARE VALVE

SIZE LIQUID mm/in

12.7 / 1/2

GAS mm/in 19 05 / 3/4

PACKING HEIGHT mm/in

1016 / 40.0

DIMENSION WIDTH mm/in

1178 / 46.4

DEPTH mm/in 602 / 23.7

COIL FAN COMPRESSOR

OUTDOOR UNIT

PIPE

SOUND LEVEL (dBA)

TUBEFINTUBE

COIL

INDOOR UNIT

FAN

FIN

* not suitable for high ambient application

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIO NS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C W B INDOOR AND 46.1 C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

COOLING ONLY (R22)

MODEL INDOOR UNIT RCM 62C

OUTDOOR UNIT ALC 61C NOMINAL kcal/h 14110 COOLING W 16410 CAPACITY Btu/h 56000 NOMINAL TOTAL POWER W 6195 NOMINAL TOTAL CURRENT A

30.6

POWER SOURCE V/Ph/Hz 230 / 1 / 60 REFRIGERANT / CONTROL R22 / CAPILLARY TUBE IN INDOOR

AIR FLOW cfm / L/s

1550 / 732

HIGH 56 MED 53 LOW

FAN MOTOR 2 x 4 POLES x 80 W RATED INPUT POWER W 338 RATED RUNNING CURRENT A 1.60

MATERIAL S.I.G.C DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL

ALUMINIUM

THICKNESS mm/in 0.11 / 0.0043 ROW 4 FIN PER INCH

FACE AREA

0.42 / 4.51

HEIGHT mm/in 285 / 11.2

DIMENSION WIDTH mm/in 1903 / 74.9

DEPTH mm/in 680 / 26.8

WEIGHT kg 85 CONTROL ROOM TEMPERATURE MICROCOMPUTER CONTROLLED THERMOSTAT

OPERATION

LCD WIRELESS OR WIRED MICROCOMPUTER REMOTE CONTROL

CONDENSATE DRAIN SIZE mm/in 19.05 / 3/4 AIR FILTER WASHABLE SARAN NET PACKING HEIGHT mm/in

368 / 14.5

DIMENSION WIDTH mm/in 1984 / 78.1

DEPTH mm/in 760 / 29.9

POWER SOURCE V/Ph/Hz 230 / 1 / 60 COMPRESSOR TYPE SCROLL CAPACITOR µF 70 LOCK ROTOR AMP. A 144.0 RATED RUNNING CURRENT A

27.7

RATED INPUT POWER W 5500 PROTECTION DEVICE OVERLOAD PROTECTION / HI-LO PRESSURE SWITCH POWER SOURCE V/Ph/Hz

230 / 1 / 60

FAN TYPE / DRIVE

PROPELLER / DIRECT

BLADE MATERIAL GLASS R. ACRLY STYLENE RESIN DIAMETER mm/in 600 / 24 RATED RUNNING CURRENT A

1.7

MOTOR OUTPUT W 160 RATED INPUT POWER W 357

MATERIAL S.I.G.C DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL ALUMINIUM (SLIT) THICKNESS mm/in

0.127 / 0.005

ROW 3 FIN PER INCH 14

FACE AREA

0.84 / 9.04

HEIGHT mm/in 850 / 33.5

DIMENSION WIDTH mm/in 1030 / 40.6

DEPTH mm/in

460 / 18.1

WEIGHT kg 108

MATERIAL ELECTRO GALVANIZED MILD STEEL

CASING THICKNES S mm /in 1.0 - 2.3 (0.0393 -0.0905)

FINISHING EPOXY POLYESTER POWDER COATING

SOUND PRESSURE LEVEL dBA 61

TYPE FLARE VALVE SIZE LIQUID mm/in

12.7 / 1/2

GAS mm/in 19.05 / 3/4

PACKING HEIGHT mm/in 1016 / 40.0 DIMENSION WIDTH mm/in

1178 / 46.4

DEPTH mm/in 602 / 23.7

INDOOR UNIT

FAN

SOUND LEVEL (dBA)

COIL

TUBEFINTUBEFIN

PIPE

OUTDOOR UNIT

COMPRESSORFANCOIL

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIO NS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C W B INDOOR AND 46.1 C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R22)

MODEL INDOOR UNIT RCM 61CR

OUTDOOR UNIT ALC 61CR NOMINAL kcal/h 14110 COOLING W 16410 CAPACITY Btu/h 56000 NOMINAL kcal/h 14110 HEATING W 16410 CAPACITY Btu/h 56000 NOMINAL TOTAL POWER (COOLING) W 5593 NOMINAL TOTAL POWER (HEATING) W 4551 NOMINAL TOTAL CURRENT (COOLING) A 9.4 NOMINAL TOTAL CURRENT (HEATING) A 8.1

POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 REFRIGERANT / CONTROL R22 / CAPILLARY TUBE - NDOOR (COOLING), OUTDOOR (HEAT NG)

AIR FLOW cfm / L/s 15 50 / 732

HIGH 56

MED 53

LOW 46 FAN MOTOR 2 x 4 POLES x 80 W RATED INPUT POWER W 327 RATED RUNNING CURRENT A 1.40

MATERIAL S.I.G.C DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL ALUMINIUM THICKNESS mm/in 0.11 / 0 0043 ROW 4 FIN PER INCH 14

FACE AREA

0.42 / 4 51

HEIGHT mm/in 285 / 11.2

DIMENSION WIDTH mm/in 1874 / 73 8

DEPTH mm/in 666 / 26.2 WEIGHT kg 85 CONTROL ROOM TEMPE RATURE MICROCOMPUTER CONTROLLED THERMOS TAT

OPERATION LCD WIRELESS OR W IRED MICROCOMPUTER REMOTE CONTROL CONDENSATE DRAIN SIZE mm/in 19.05 / 3/4 AIR FILTER WASHABLE S ARAN NET PACKING HEIGHT mm/in 368 / 14.5 DIMENSION WIDTH mm/in 1992 / 78.4

DEPTH mm/in 760 / 29.9

POWER SOURCE V/Ph/Hz 41 5 / 3 / 50 COMPRESSOR TYPE SCROL L CAPACITOR µF LOCK ROTOR AMP. A 74.0 RATED RUNNING CURRENT (COOLI A 8.5 RATED RUNNING CURRENT (HEATI

A 7.2 RATED INPUT POWER (COOLING) W 5008 RATED INPUT POWER (HEATING) W 3966 PROTECTION DEVICE OVERLOAD PROTECTION / HI PRESSURE SWITCH POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 FAN TYPE / DRIVE PROPELLER / DIRECT BLADE MATERIAL

GLASS R. ACRLY STYLENE RESIN

DIAMETER mm/in 600 / 24 RATED RUNNING CURRENT A 1.2 MOTOR OUTPUT W 400 RATED INPUT POWER W 258

MATERIAL S.I.G.C DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL ALUMINIUM (CORRUGATED) THICKNESS mm/in 0.127 / 0 005 ROW 3 FIN PER INCH 14

FACE AREA

0.84 / 9 04

HEIGHT mm/in 850 / 33.5

DIMENSION WIDTH mm/in 1030 / 40 6

DEPTH mm/in 460 / 18.1

WEIGHT kg 108

MATERIAL ELECTRO GALVANIZED MILD STEEL

CASING THICKNESS mm/in 1.0 - 2.3 (0.0393 -0.0905)

FINISHING EPOXY POLYESTER POWDER COATING

SOUND PRESSURE LEVE L dBA 61

TYPE FLARE VALVE SIZE LIQUID mm/in 12.7 / 1/ 2

GAS mm/in 19.05 / 3/4 PACKING HEIGHT mm/in 1016 / 40 0 DIMENSION WIDTH mm/in 1178 / 46.4

DEPTH mm/in 602 / 23.7

COIL

INDOOR UNIT

FAN

SOUND LEVEL (dBA)

TUBEFINTUBE

COMPRESSOR

OUTDOOR UNIT

FANPIPE

FIN

COIL

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON T HE CONDITIONS BELOW a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR b) HEATING - 21.0°C DB INDOOR AND -8.3°C DB / -9.4°C WB OUTDOOR TO

26.7°C DB INDOOR AND 23.9°C DB / 18.3°C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R22)

MODEL INDOOR UNIT RCM 62CR

OUTDOOR UNIT

ALC 61CR

NOMINAL kcal/h 14110 COOLING W 16410 CAPACITY Btu/h

56000

NOMINAL kcal/h 14110 HEATING W 16410 CAPACITY Btu/h 56000 NOMINAL TOTAL POWER (COOLING) W 6195 NOMINAL TOTAL POWER (HEATING) W 5265 NOMINAL TOTAL CURRENT (COOLING) A 30.6 NOMINAL TOTAL CURRENT (HEATING) A

26.0

POWER SOURCE V/Ph/Hz 230 / 1/ 60 REFRIGERANT / CONTROL R22 / CAPILLARY TUBE - INDOOR (COOLING ), OUTDOOR (HEATING)

AIR FLOW cfm / L/s

1550 / 732

HIGH 56

MED 53

LOW 46 FAN MOTOR 2 x 4 POLES x 80 W RATED INPUT POWER W 338 RATED RUNNING CURRENT A 1.60

MATERIAL

S.I.G.C

DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL

ALUMINIUM

THICKNESS mm/in 0.11 / 0.0043 ROW 4 FIN PER INCH 14

FACE AREA

0.42 / 4.51

HEIGHT m m/in 285 / 11.2

DIMENSION WIDTH m m/in 1903 / 74.9

DEPTH mm/ in 680 / 26.8 WEIGHT kg 85 CONTROL ROOM TEMP ERATURE MICROCOMPUTER CONTROLLED THERMOSTAT

OPERATION

LCD WIRELESS OR WIRED MICROCOMPUTER REMOTE CONTROL

CONDENSATE DRAIN SIZE mm/ in 19.05 / 3/4 AIR FILTER WASHABLE SARAN NET PACKING HEIGHT mm/ in 368 / 14.5 DIMENSION WIDTH m m/in 1984 / 78.1

DEPTH mm/ in 760 / 29.9

POWER SOURCE V/Ph/Hz 230 / 1 / 60 COMPRESSOR TYPE SCROLL CAPACITOR µF 70 LOCK ROTOR AMP. A 144.0 RATED RUNNING CURRENT (COOLING) A

27.3

RATED RUNNING CURRENT (HEATING) A 22.7 RATED INPUT POWER (COOLING) W 5500 RATED INPUT POWER (HEATING) W 4570 PROTECTION DEVICE OVERLOAD PROTECTION / HI PRESSURE SWITCH POWER SOURCE V/Ph/Hz 230 / 1 / 60 FAN TYPE / DRIVE

PROPELLER / DIRECT

BLADE MATERIAL

GLASS R. ACRLY STYLENE RESIN

DIAMETER mm/in 600 / 24 RATED RUNNING CURRENT A 1.7 MOTOR OUTPUT W

160

RATED INPUT POWER W 357

MATERIAL S.I.G.C DIAMETER mm/in

9.52 / 3/8

THICKNESS mm/in 0.35 / 0.014 MATERIAL ALUMINIUM (CORRUGATED) THICKNESS mm/in 0.127 / 0.005 ROW 3 FIN PER INCH 14

FACE AREA

0.84 / 9.04

HEIGHT m m/in 850 / 33.5 DIMENSION WIDTH m m/in 1030 / 40.6

DEPTH mm/ in 460 / 18.1 WEIGHT kg

108

MATERIAL ELECTRO GALVANIZED MILD STEEL CASING THICKNESS mm/in 1.0 - 2.3 (0.0393 -0.0905)

FINISHING EPOXY POLYESTER POWDER COATING SOUND PRESSURE LEVEL dBA 61

TYPE FLARE VALVE SIZE LIQUID mm/in 12.7 / 1/2

GAS mm/in 19.05 / 3/4 PACKING HEIGHT mm/ in 1016 / 40.0 DIMENSION WIDTH m m/in 1178 / 46.4

DEPTH mm/ in

602 / 23.7

COMPRESSORFANCOIL

TUBEFIN

PIPE

INDOOR UNIT

FAN

SOUND LEVEL (dBA)

COIL

TUBEFIN

OUTDOOR UNIT

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON TH E CONDITIONS BELOW a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR b) HEATING - 21.0°C DB INDOOR AND -8.3°C DB / -9.4°C WB OUTDOOR TO

26.7°C DB INDOOR AND 23.9°C DB / 18.3°C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

COOLING ONLY (R407C)

MODEL I NDOOR UNIT RCM 20D RCM 25D RCM 30D RCM 40D RCM 50D

OUTDOOR UNIT A4LC 20B A4LC 25B A4LC 30C A4LC 40C A4LC 50C NOMINAL kcal/h 4612 5292 7560 9576 12600 COOLING W 5363 6155 8792 11134 14654 CAPACITY Btu/h 18300 21000 30000 38000 50000 NOMINAL TOTAL POWER - 1∅ [ 3∅ ]

W 2341 [ 212 2 ] 2923 [ 2771 ] 2933 [ 29 23 ] [ 4222 ] [ 4809 ]

NOMINAL TOTAL CURRENT - 1∅ [ 3∅ ]

A 10 9 [ 3.9 ] 13 6 [ 5.2 ] 13.1 [ 5.1 ] [ 7 0 ] [ 8 9 ]

POWER SOURCE V/Ph/Hz REFRIGERANT / CONTROL

AIR FLOW cfm / L/s 590 / 278 660 / 312 730 / 345 1110 / 524 1110 / 524 FAN MOTOR 4 POLES x 45W 4 POLES x 95W 4 POLES x 95W 4 POLES x 145W 4 POLES x 145W RATED INPUT POWER W 96 130 132 240 240 RATED RUNNING CURRENT A 0.40 0 58 0.58 1.04 1.04

MATERIAL S.I.G.C S.B. C S.I.G.C DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW 33344 FIN PER INCH 12 12 1 2 12 12

FACE AREA

0.19 / 2.06 0. 19 / 2.06 0.24 / 2.58 0.36 / 3.95 0.36 / 3.95

HEIGHT mm/i n 214 / 8.42 214 / 8.42 249 / 9.80 249 / 9.80 249 / 9.80

DIMENSION WIDTH mm/in 1214 / 47 80 1214 / 47 80 1214 / 47 80 1714 / 67.40 1714 / 67.40

DEPTH mm/in 670 / 26.3 0 670 / 26. 30 670 / 26. 30 670 / 26 30 670 / 26 30

WEIGHT kg 43 43 45 70 70 SOUND PRESSURE LEVEL ( H / M / L ) dBA 50 / 47 / 40 54 / 53 / 50 51 / 50 / 48 54 / 53 / 52 54 / 53 / 52

ROOM TEMPERATURE

CONTROL AIR DISCHARGE

OPERATION

CONDENSATE DRAIN SIZE mm/in AIR F ILTER PACKING HEIGHT mm/in 345 / 13 6 DIMENSION WIDTH mm/in 1361 / 53.5

DEPTH mm/in 760 / 29 9

POWER SOURCE V/Ph/Hz COMPRESSOR TYPE CAPACITOR µF 45 / < NIL > 50 / < NIL > 50 / < N L > NIL NIL LOCK ROTOR AMPERE A 54 / < 21 > 58 / < 26 > 78 / < 40 > 45 62 RATED RUNNING CURRENT A 9.91 / < 3.6 > 12.5 / < 4.8 > 11.4 / < 4 5 > 6 3 8 2 RATED INPUT POWER W 2112 / < 1893 > 2660 / < 2508 > 2560 / < 2550 > 3741 4328 PROTECTION DEVICE POWER SOURCE V/Ph/Hz FAN TYPE / DRIVE BLADE MATERIAL DIAMETER mm/in RATED RUNNING CURRENT A MOTOR OUTPUT W RATED INPUT POWER W

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW 122 FIN PER INCH 16 16 16

FACE AREA

HEIGHT mm/i n

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg 57 58 95 100 105

MATERIAL

CASING THICKNESS mm/in

FINISHING

SOUND PRESSURE LEVEL dBA 52 53 58 58 58

TYPE SIZE LIQUID mm/in 6.35 / 1/4

GAS mm/in 15 88 / 5/8

PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in

REFRIGERANT CHARGE kg 1 65 1 65 1 90 / < 2.48 > 3.13 3.15

840 / 33.10 330 / 13.00

9.52 / 3/8

0 8 / 0.031

560 / 22 05

15 88 / 5/8

957 / 37.68 461 / 18.15

1200 / 47.24

710 / 27.95

19.05 / 3/4

1000 / 39.37

ROTARY

1311 / 51.6

0.11 / 0.0043

LCD W RELESS / LED W RED MICROCOMPUTER REMOTE CONTROL

301 / 11 9

1816 / 71.4

MICROCOMPUTER CONTROLLED THERMOSTAT

AUTOMATIC LOUVER (UP & DOWN) & MANUAL LOUVE R (BOTTOM)

19 05 / 3/4

WASHABLE SA RAN NET (OPTIONAL IONIZER F LTER)

345 / 13.6

760 / 29.9

COIL

TUBEFIN

COIL

TUBE

COMPRESSORFANPIPE

420.0 / 16.5

609.6 / 24 0

1.09 145 241133

FIN

9 52 / 3/8

220 - 240 / 1 / 50

R407C / CAPILLARY TUBE (INDOOR)

9.52 / 3/8

ALUMINIUM (HYDROPH LIC TYPE)ALUM NIUM

R407C / CAP LLARY TUBE (OUTDOOR)

S.B.C.

0 35 / 0 014

646 / 25.40

380 - 420 / 3 / 50

OVERLOAD PROTECTION

SEAMLESS COPPER

GLASS REINFORCED ACRYL STYRENE RES N

0 56

PROPELLER / D RECT

SCROLL

0 36 / 0 014

ALUMINIUM (SLIT F N TYPE)

INDOOR UNIT

FAN

0.127 / 0.005

GALVANISED M LD STEEL

0.87 / 9.33

220 - 240 / 1 / 50 / < 380 - 420 / 3 / 50 >

760 / 29 9

850 / 33.46

400 / 15.75

OUTDOOR UNIT

220 - 240 / 1 / 50

EPOXY POLYESTER POWDER

9.52 / 3/8

FLARE VALVE / AEROQUIP

1.0-2.3 / 0 0393-0 0905

1029 / 40.53

FLARE VALVE

0 51 / 5.53

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIO NS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C W B INDOOR AND 46.1 C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R407C)

MODEL INDOOR UNIT RCM 20DR RCM 25DR RCM 30DR RCM 40DR RCM 50DR

OUTDOOR UNIT A4LC 20BR A4LC 25BR A4LC 30CR A4LC 40CR A4LC 50CR NOMINAL kcal/h 4536 5170 7310 9830 12100 COOLING W 5274 6008 8499 11430 14068 CAPACITY Btu/h 18000 20500 29000 39000 48000 NOMINAL kcal/h 4790 6050 7812 10332 12600 HEATING W 5569 7034 9083 12013 14654 CAPACITY Btu/h 19000 24000 31000 41000 50000 NOMINAL TOTAL POWER

(

COOLING) - 1∅[ 3∅ ]

W 2231 [ 2122 ] 2834 [ 2771 ] 2797 [ 2787 ] [ 4046 ] [ 5096 ]

NOMINAL TOTAL POWER

(

HEATING) - 1∅[ 3∅ ]

W 2325 [ 2132 ] 2812 [ 2833 ] 2780 [ 2761 ] [ 3761 ] [ 4215 ]

NOMINAL TOTAL CURRENT

(

COOLING) - 1∅ [ 3∅

]

A 10.5 [ 3. 9 ] 13.7 [ 5.2 ] 13.2 [ 4.9 ] [ 6 9 ] [ 9.5 ]

NOMINAL TOTAL CURRENT

(

HEATING) - 1∅ [ 3∅ ]

A 11.1 [ 3. 9 ] 13.6 [ 5.3 ] 13.1 [ 4.8 ] [ 6 6 ] [ 8.5 ]

POWER SOURCE V/Ph/Hz REFRIGERANT / CONTROL

R407C / TXV (OUTDOOR)

AIR FLOW cfm / L/s 590 / 278 660 / 312 730 / 345 1110 / 524 1110 / 524 FAN MOTOR 4 POLES x 45W 4 P OLES x 95W 4 POLES x 95W 4 POLES x 145W 4 POLES x 145 W RATED INPUT POWER W 96 130 132 240 240 RATED RUNNING CURRENT A 0.40 0.58 0.58 1.04 1 04

MATERIAL S.I.G.C S.B.C. S .I.G.C DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW 33344 FIN PER INCH 12 12 12 12 12

FACE AREA

0.19 / 2.06 0.19 / 2.06 0 .24 / 2.58 0.36 / 3.95 0 36 / 3.95

HEIGHT mm/in 214 / 8.42 214 / 8.42 249 / 9.80 249 / 9.8 0 249 / 9 80

DIMENSION WIDTH mm/in 1214 / 47.80 1214 / 47.80 1214 / 47.80 1714 / 67.40 1714 / 67.40

DEPTH mm/in 670 / 26 30 670 / 26 30 670 / 26 30 670 / 26. 30 670 / 26.30

WEIGHT kg 43 43 45 70 70 SOUND PRESSURE LEVEL ( H / M / L ) dBA 50 / 47 / 40 54 / 53 / 50 51 / 50 / 48 54 / 53 / 52 54 / 53 / 52

ROOM TEMPERATURE

CONTROL AIR DISCHARGE

OPERATION

CONDENSATE DRAIN SIZE m m/in AIR F ILTER PACKING HEIGHT mm/in 345 / 13.6 DIMENSION WIDTH mm/in 1361 / 53.5

DEPTH mm/in 760 / 29.9

POWER SOURCE V/Ph/Hz COMPRESSOR TYPE CAPACITOR µF 45 / < N L > 50 / < N L > 50 / < N L > N L N L LOCK ROTOR AMPERE A 54 / < 21 > 58 / < 26 > 7 8 / < 40 > 45 62 RATED RUNNING CURRENT (COOLING) A 9.5 / < 3.6 > 12.6 / < 4 8 > 11.5 / < 4 3 > 6 2 8 .8 RATED RUNNING CURRENT (HEATING) A 10.1 / < 3 6 > 12.5 / < 4 9 > 11.4 / < 4 2 > 5 9 7.8 RATED INPUT POWER (COOLING) W 2002 / < 1893 > 2571 / < 250 8 > 2424 / < 2414 > 3565 4615 RATED INPUT POWER (HEATING) W 2096 / < 1903 > 2549 / < 2570 > 2407 / < 2388 > 3280 3734 PROTECTION DEVICE POWER SOURCE V/Ph/Hz FAN TYPE / DRIVE BLADE MATERIAL DIAMETER mm/in RATED RUNNING CURRENT A MOTOR OUTPUT W RATED INPUT POWER W

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW FIN PER INCH

FACE AREA

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in

WEIGHT kg 57 58 95 100 105

MATERIAL

CASING THICKNESS mm/in

FINISHING

SOUND PRESSURE LEVEL dBA 52 53 58 58 58

TYPE SIZE LIQUID m m/in 6 35 / 1/4

GAS mm/in 15.88 / 5/8

PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in

REFRIGERANT CHARGE kg 1.70 1.65 2.35 / < 2.48 > 3.10 3.35

0.8 / 0 031

1.09

PROPELLER / D RECT

SCROLLROTARY HERMETIC

0.56

420 0 / 16 5

GLASS REINFORCED ACRYL STYRENE RES N

609.6 / 24.0

220 - 240 / 1 / 50

9 52 / 3/8

LCD W RELESS / LE D W RED MICROCOMPUTER REMOTE CONTROL

R407C / CAPILLARY TUBE + TXV (OUTDOOR)

0 35 / 0 014

MICROCOMPUTER CONTROLLED THERMOSTAT

ALUM NIUM (HYDROPHILIC)ALUMINIUM

OVERLOAD PROTECTION

380 - 420 / 3 / 50

760 / 29 9

220 - 240 / 1 / 50

R407C / CAP LLARY (OUTDOOR)

S.B.C.

1816 / 71.41311 / 51 6

0.11 / 0.0043

AUTOMATIC LOUVER (UP & DOWN) & MANUAL LOUVER (BOTTOM)

19.05 / 3/4

345 / 13 6

WASHABLE SARAN NET (OPTIONAL IONIZER FILTER)

220 - 240 / 1 / 50 / < 380 - 420 / 3 / 50 >

301 / 11.9

760 / 29.9

PIPE COIL FAN

TUBE

COIL

TUBEFIN

FAN

461 / 18.15

1000 / 39 37 1200 / 47 24

560 / 22.05

710 / 27 95 957 / 37 68

145 241

850 / 33.46

19 05 / 3/4

EPOXY POLYESTER POWDER

9 52 / 3/8

15.88 / 5/8

FLARE VALVE / AEROQUIP FLARE VALVE

1.0-2.3 / 0 0393-0.0905

GALVANISED M LD STEEL

840 / 33.10 330 / 13 00

646 / 25.40

INDOOR UNIT

0.51 / 5.53

0.127 / 0.005

9 52 / 3/8

ALUMINIUM (SLIT F N TYPE)

COMPRESSOR

133

OUTDOOR UNIT

SEAMLESS COPPER

0 36 / 0 014

0.87 / 9.33

9.52 / 5/8

1029 / 40 53

400 / 15.75

FIN

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR b) HEATING - 21.0°C DB INDOOR AND -8.3°C DB / -9.4°C WB OUTDOOR TO

26.7°C DB INDOOR AND 23.9°C DB / 18.3°C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

COOLING ONLY (R407C)

MODEL INDOOR UNIT

OUTDOOR UNIT

A4LC 60C A4LC 61C

NOMINAL kcal/h

13860 13610

COOLING W

16120 15830

CAPACITY Btu/h

55000 54000

NOMINAL TOTAL POWER W

6027 5645

NOMINAL TOTAL CURRENT A

10 2 9 5

POWER SOURCE V/Ph/Hz REFRIGERANT / CONTROL

AIR FLOW cfm / L/s

HIGH

MED

LOW FAN MOTOR RATED INPUT POWE R W RATED RUNNING CURRENT A

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW FIN PER INCH

FACE AREA

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in WEIGHT kg CONTROL ROOM TEMPERATURE

OPERATION CONDENSATE DRAIN SIZE mm/in AIR FILTER PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in

POWER SOURCE V/Ph/Hz COMPRESSOR TYPE CAPACITOR µF

LOCK ROTOR AMP. A

74 74

RATED RUNNING CURRENT A

8.8 8 6

RATED INPUT POWE R W

5045 5060

PROTECTION DEVICE POWER SOURCE V/Ph/Hz FAN TYPE / DRIVE BLADE MATERIAL DIAMETER mm/in RATED RUNNING CURRENT A

2.8 1 2

MOTOR OUTPUT W 400 400 RATED INPUT POWE R W 655 258

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW

FIN PER INCH 16 14

FACE AREA

0.87 / 9.33 0.84 / 9.04

HEIGHT mm/in

850 / 33.5 850 / 33 5

DIMENSION WIDTH mm/in

1030 / 40.6 1030 / 40.6

DEPTH mm/in

400 / 15.7 460 / 18.1

WEIGHT kg

105 108

MATERIAL CASING THICKNESS mm/in

FINISHING SOUND PRESSURE LEVEL dBA

71 61

TYPE SIZE LIQUID mm/in

GAS mm/in PACKING HEIGHT mm/in

1000 /39.4 1016 / 40.0

DIMENSION WIDTH mm/in 1200 / 47.2 1178 / 46.4

DEPTH mm/in 560 / 22.0 602 / 23.7

0.127 / 0.005

S.I.G.C

9.52 / 3/8

0.35 / 0.014

ALUMINIUM (CORR.)

220 - 240 / 1 / 50

PROPELLER / DIRECT

GLASS REINFORCED ACRLY STYLENE RESIN

600 / 24

FLARE VALVE

12.7 / 1/2

19.05 / 3/4

760 / 29.9

ELECTRO GALVANIZED MILD STEEL

1 0 - 2 3 (0 0393 -0.0905)

EPOXY POLYESTER POWDER COATING

415 / 3 / 50

SCROLL

OVERLOAD PROTECTION / HI-LO PRESSURE SWITCH

19.05 / 3/4

WASHABLE SARAN NET

368 / 14.5

1992 / 78.4

666 / 26.2

MICROCOMPUTER CONTROLLED THERMOSTAT

LCD W RELESS OR W RED MICROCOMPUTER REMOTE CONTROL

0.42 / 4 51 285 / 11.2

1874 / 73 8

0.35 / 0.014

ALUM NIUM

0.11 / 0.0043 4

327

1.40

S.I.G.C

9.52 / 3/8

56 53 46

2 x 4 POLES x 80 W

RCM 61C

220 - 240 / 1 / 50

R407C / CAP LLARY TUBE IN INDOOR

1550 / 732

FIN

COIL

SOUND LEVEL (dBA)

TUBEFINTUBE

COILFAN COMPRESSOR

OUTDOOR UNIT

PIPE

INDOOR UNIT

FAN

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIO NS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C W B INDOOR AND 46.1 C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

COOLING ONLY (R407C)

MODEL INDOOR UNIT

OUTDOOR UNIT A4LC 60C A4LC 61C NOMINAL kcal/h 13860 13610 COOLING W 16120 15830 CAPACITY Btu/h 55000 54000 NOMINAL TOTAL POWER W 6027 5645 NOMINAL TOTAL CURRENT A 10.2 9.5

POWER SOURCE V /Ph/Hz REFRIGERANT / CONTROL

AIR FLOW cfm / L/s

HIGH MED

LOW FAN MOTOR RATED INPUT POWER W RATED RUNNING CURRENT A

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW FIN PER INCH

FACE AREA

HEIGHT mm/in

DIMENSION WIDTH mm/in

DEPTH mm/in WEIGHT kg CONTROL ROOM TEMPERATURE

OPERATION CONDENSATE DRAIN SIZE mm/in AIR F ILTE R PACKING HEIGHT mm/in DIMENSION WIDTH mm/in

DEPTH mm/in POWER SOURCE V/Ph/Hz COMPRESSOR TYPE CAPACITOR µF

LOCK ROTOR AMP. A 74 74 RATED RUNNING CURRENT A 8.8 8.6 RATED INPUT POWER W 5045 5060 PROTECTION DEVICE POWER SOURCE V/Ph/Hz FAN TYPE / DRIVE BLADE MATERIAL DIAMETER mm/in RATED RUNNING CURRENT A 2.8 1.2 MOTOR OUTPUT W 400 400 RATED INPUT POWER W 655 258

MATERIAL DIAMETER mm/in THICKNESS mm/in MATERIAL THICKNESS mm/in ROW 23 FIN PER INCH 16 14

FACE AREA

0.87 / 9.33 0.84 / 9.04

HEIGHT mm/in 850 / 33.5 850 / 33.5

DIMENSION WIDTH mm/in

1030 / 40.6 1030 / 40.6

DEPTH mm/in 400 / 15.7 460 / 18.1

WEIGHT kg 105 108

MATERIAL

CASING THICKNESS mm/in

FINISHING

SOUND PRESSURE LEVEL dBA 71 61

TYPE SIZE LIQUID mm/in

GAS mm/in

PACKING HEIGHT mm/in 1000 /39.4 1016 / 40.0 DIMENSION WIDTH mm/in

1200 / 47.2 1178 / 46.4

DEPTH mm/in 560 / 22.0 602 / 23.7

RCM 62C

INDOOR UNIT

220 - 240 / 1 / 50

R407C / CAPILLARY TUBE IN INDOOR

FAN

1550 / 732

SOUND LEVEL (dBA)

56 53 46

2 x 4 POLES x 80 W

327

1.40

COIL

TUBE

S.I.G.C

9.52 / 3/8

0.35 / 0.014

FIN

ALUMINIUM

0.11 / 0.0043 4

0.42 / 4.51 285 / 11.2

1903 / 74.9

680 / 26.8

MICROCOMPUTER CONTROLLED THERMOSTAT

LCD WIRELESS OR WIRED MICROCOMPUTER REMOTE CONTROL

19.05 / 3/4

WASHABLE SARAN NET

368 / 14.5

1984 / 78.1

760 / 29.9

OUTDOOR UNIT

COMPRESSOR

415 / 3 / 50

SCROLL

OVERLOAD PROTECTION / HI-LO PRESSURE SWITCH

FAN

220 - 240 / 1 / 50

PROPELLER / DIRECT

GLASS REINFORCED ACRLY STYLENE RESIN

600 / 24

COIL

TUBE

S.I.G.C

9.52 / 3/8

0.35 / 0.014

FIN

ALUMINIUM (CORR.)

0.127 / 0.005

ELECTRO GALVANIZED MILD STEEL

1.0 - 2.3 (0.0393 -0.0905)

EPOXY POLYESTER POWDER COATING

PIPE

FLARE VALVE

12.7 / 1/2

19.05 / 3/4

* not suitable for high ambient applicat ion

1) ALL SPECIFICATIONS ARE SUBJECTED TO CH ANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPL Y TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIO NS BELOW : a) COOLING - 26.7 C DB / 19.4 C WB INDOOR AND 35 C DB OUTDOOR

4) ALLOWABLE OPERATING RANGE

a) COOLING - 19.4 C DB / 13.9 C WB INDOOR AND 19.4 C DB OUTDOOR TO

26.7 C DB / 19.4 C W B INDOOR AND 46.1 C DB OUTDOOR

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R407C)

MODEL INDOOR UNI T RCM 61CR

OUTDOOR UNIT

A4LC 61CR

NOMINAL kcal/h 14110 HEATING W 16410 CAPACITY Btu/h

56000

NOMINAL kcal/h 13610 COOLING W 15830 CAPACITY Btu/h 54000 NOMINAL TOTAL POWER (COOLING) W 5645 NOMINAL TOTAL POWE R (HEATING) W 5145 NOMINAL TOTAL CURRENT (COOLING) A 9.5 NOMINAL TOTAL CURRENT (HEATING) A

9.0

POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 REFRIGERANT / CONTROL R22 / CAPILLARY TUB E - INDOOR (COOLING), OUTDOOR (HEATING)

AIR F LOW cfm / L/s

1550 / 732

HIGH 56

MED 53

LOW 46 FAN MOTOR 2 x 4 POLES x 80 W RATED INPUT POWER W 327 RATED RUNNING CURRENT A 1.40

MATERIAL

S.I.G.C

DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/ in 0.35 / 0.014 MATERIAL

ALUMINIUM

THICKNESS mm/ in 0.11 / 0.0043 ROW 4 FIN PER INCH 14

FACE AREA

0.42 / 4.51

HEIGHT mm/in 285 / 11.2

DIMENSION WIDTH mm/in 1874 / 73.8

DEPTH mm/in 666 / 26.2 WEIGHT kg 85 CONTROL ROOM TEMP ERATURE MICROCOMP UTER CONTROLLED THERMOSTAT

OPERATION

LCD WIRELESS OR WIRED MICROCOMPUTER REMOTE CON TROL

CONDENSATE DRAIN SIZE mm/in 19. 05 / 3/4 AIR FILTER WASHABLE S ARAN NET PACKING HEIGHT mm/in 368 / 14.5 DIMENSION WIDTH mm/in 1992 / 78.4

DEPTH mm/in 760 / 29.9

POWER SOURCE V/Ph/Hz 415 / 3 / 50 COMPRESSOR TYPE SCROLL CAPACITOR µF LOCK ROTOR AMP. A 74.0 RATED RUNNING CURRENT (COOLING) A

8.6

RATED RUNNING CURRENT (HEATING) A 8.1 RATED INPUT POWER (COOLING) W 5060 RATED INPUT POW ER (HEATING) W 4560 PROTECTION DEVICE OVERLOAD PROTECTION / HI PRESSURE SWITCH POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 FAN TYPE / DRIVE

PROPELLER / DIRECT

BLAD E MATE RIAL GLASS REINFORCED ACRLY STYLENE RESIN DIAMETER mm/in 600 / 24 RATED RUNNING CURRENT A 1.2 MOTOR OUTPUT W

400

RATED INPUT POWER W 258

MATERIAL S.I.G.C DIAMETER mm/in

9.52 / 3/8

THICKNESS mm/ in 0.35 / 0.014 MATERIAL ALUMINIUM (CORRUGATED) THICKNESS mm/ in 0.127 / 0.005 ROW 3 FIN PER INCH 14

FACE AREA

0.84 / 9.04

HEIGHT mm/in 850 / 33.5 DIMENSION WIDTH mm/in 1030 / 40.6

DEPTH mm/in 460 / 18.1 WEIGHT kg

108

MATERIAL ELECTRO GALVANIZED MILD STEEL CASING THICKNE SS mm/in 1.0 - 2.3 (0.0393 -0.0905)

FINISHING EPOXY POLYESTER POWDER COATING SOUND PRESSURE LEVE L dBA 61

TYPE FLARE VALVE SIZE LIQUID mm/in 12. 7 / 1/2

GAS mm/in 19.05 / 3/4 PACKING HEIGHT mm/in 1016 / 40.0 DIMENSION WIDTH mm/in 1178 / 46.4

DEPTH mm/in

602 / 23.7

INDO OR UN IT

FAN

SOUND LEVEL (dBA)

COIL

TUBEFINTUBEFIN

PIPE

OUTDOOR UNIT

COMPRESSORFANCOIL

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON TH E CONDITIONS BELOW a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR b) HEATING - 21.0°C DB INDOOR AND -8.3°C DB / -9.4°C WB OUTDOOR TO

26.7°C DB INDOOR AND 23.9°C DB / 18.3°C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

HEAT PUMP (R407C)

MODEL INDOOR UNIT RCM 62CR

OUTDOOR UNIT

A4LC 61CR

NOMINAL kcal/h 14110 HEATING W 16410 CAPACITY Btu/h

56000

NOMINAL kcal/h 13610 COOLING W 15830 CAPACITY Btu/h 54000 NOMINAL TOTAL POWER (COOLING) W 5645 NOMINAL TOTAL POWER (HEATING) W 5145 NOMINAL TOTAL CURRENT (COOLING) A 9.5 NOMINAL TOTAL CURRENT (HEATING) A

9.0

POWER SOURCE V/Ph/Hz 220 - 240 / 1 / 50 REFRIGERANT / CONTROL R22 / CAPILLARY TUBE - I NDOOR (COOLING), OUTDOOR (HEATING)

AIR F LOW cfm / L/s

1550 / 732

HIGH 56 MED 53

LOW 46 FAN MOTOR 2 x 4 POLES x 80 W RATED INPUT POWER W 327 RATED RUNNING CURRENT A 1.40

MATERIAL

S.I.G.C

DIAMETER mm/in 9.52 / 3/8 THICKNESS mm/in 0.35 / 0.014 MATERIAL

ALUMINIUM

THICKNESS mm/in 0.11 / 0.0043 ROW 4 FIN PER INCH 14

FACE AREA

0.42 / 4.51

HEIGHT mm/in 285 / 11 .2

DIMENSION WIDTH mm/in 1903 / 74.9

DEPTH mm/in 680 / 26 .8 WEIGHT kg 85 CONTROL ROOM TEMP ERATURE MICROCOMPUT ER CONTROLLED THERMOSTAT

OPERATION

LCD WIRELES S OR WIRED MICROCOMPUTER REMOTE CON TROL

CONDENSATE DRAIN SIZE mm/in 19. 05 / 3/4 AIR F ILTER WASHABLE SARAN NET PACKING HEIGHT mm/in 36 8 / 14.5 DIMENSION WIDTH mm/in 1984 / 78.1

DEPTH mm/in 760 / 29 .9

POWER SOURCE V/P h/Hz 415 / 3 / 50 COMPRESSOR TYPE SCROLL CAPACITOR µF LOCK ROTOR AMP. A 74.0 RATED RUNNING CURRENT (COOLING) A

8.6

RATED RUNNING CURRENT (HEATING) A 8.1 RATED INPUT POWER (COOLING) W 5060 RATED INPUT POWER (HEATING) W 4560 PROTECTION DEVICE OVERLOAD PROTECTION / HI PRESSURE SWITCH POWER SOURCE V/P h/Hz 220 - 24 0 / 1 / 50 FAN TYPE / DRIVE

PROPELLER / DIRE CT

BLADE MATERIAL GLASS REINFORCED ACRLY STYLENE RESIN DIAMETER mm/in 600 / 24 RATED RUNNING CURRENT A 1.2 MOTOR OUTPU T W

400

RATED INPUT POWER W 258

MATERIAL S.I.G.C DIAMETER mm/in

9.52 / 3/8

THICKNESS mm/in 0.35 / 0.014 MATERIAL ALUMINIUM (CORRUGATED) THICKNESS mm/in 0.127 / 0.005 ROW 3 FIN PER INCH 14

FACE AREA

0.84 / 9.04

HEIGHT mm/in 850 / 33 .5 DIMENSION WIDTH mm/in 1030 / 40.6

DEPTH mm/in 460 / 18 .1 WEIGHT kg

108

MATERIAL ELECTRO GALVANIZED MILD STEEL CASING THICKN ESS mm/in 1.0 - 2.3 (0.0393 -0. 0905)

FINISHING EPOXY POLYESTER POWDER COATING SOUND PRESSURE LE VEL dBA 61

TYPE FLARE VALVE SIZE LIQUID mm/in 12.7 / 1/2

GAS mm/in 19.05 / 3/4 PACKING HEIGHT mm/in 1016 / 40.0 DIMENSION WIDTH mm/in 1178 / 46.4

DEPTH mm/in

602 / 23.7

COMPRESSORFANCOIL

TUBEFIN

PIPE

INDOOR UNIT

FAN

SOUND LEVEL (dBA)

COIL

TUBEFIN

OUTDOOR UNIT

1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.

2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94

3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON TH E CONDITIONS BELOW a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR

4) ALLOWABLE OPERATING RANGE a) COOLING - 19.4°C DB / 13.9°C WB INDOOR AND 19.4°C DB OUTDOOR TO

26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR b) HEATING - 21.0°C DB INDOOR AND -8.3°C DB / -9.4°C WB OUTDOOR TO

26.7°C DB INDOOR AND 23.9°C DB / 18.3°C WB

Abbreviation

S.B.C. - SEAMLESS BARE COPPER S.I.G.C - SEAMLESS INNER GROOVE COPPER

3. NOISE LEVEL

Model Speed

1/1 Octave Sound pressure level (dB, ref 20µPa)

125Hz 250Hz 500Hz 1kHz 2kHz 4kHz 8kHz

Overall

A (dBA)

Noise

Criteria

High

45 46 47 46 41 38 29 50 45

Medium

42 43 45 42 38 34 24 47 41

RCM 20D/DR

Low

36 37 39 35 31 24 15 40 34

High

48 51 51 50 45 41 33 54 49

Medium

47 50 50 49 44 40 32 53 48

RCM 25D/DR

Low

45 47 48 47 41 36 27 50 46

High

45 48 48 47 43 33 24 51 46

Medium

44 47 47 46 42 32 23 50 45

RCM 30D/DR

Low

43 45 45 44 39 29 20 48 43

High

51 53 51 50 47 37 30 54 49

Medium

48 51 50 49 46 36 28 53 48

RCM 40D/DR

Low

46 50 49 48 44 35 27 52 47

High

51 53 51 50 47 37 30 54 49

Medium

48 51 50 49 46 36 28 53 48

RCM 50D/DR

Low

46 50 49 48 44 35 27 52 47

High

34 45 49 52 49 44 37 56 51

Medium

32 43 46 49 46 41 33 53 48

RCM 61/62 C/CR

Low

26 36 40 42 38 32 24 46 41

RCM20D/DR RCM25D/DR

Standard: JIS C 9612

RCM30D/DR RCM40D/DR RCM50D/DR

RCM61/62 C/CR

Standard: JIS B 8615

Model Measuring location

Microphone

0 8m

125 250 500 1000 2000 4000 8000

Octave- band frequency (Hz)

Sound press ure level (dB, ref 20 Pa )

M easured in anechoic roo m at 1m in front of t he unit and 0 8m below the air dis charge opening

NC-40

NC-35

NC-30

NC-25

NC-20

NC-45

NC-50

Hi gh f an

Medium fan

Lo w f an

RCM20D/DR NC Curves

125 250 500 1000 2000 4000 8000

Octave-band frequency (Hz)

Sound press ure level (dB, ref 20 Pa )

M easured in anechoic roo m at 1m in front of t he unit and 0 8m below the air dis charge opening

NC-40

NC-35

NC-30

NC-25

NC-20

NC-45

NC-50

Hi gh fa n

Lo w f an

Medium fan

RCM25D/DR NC Curves

125 250 500 1000 2000 4000 8000

Octave-band frequenc y (Hz)

Sound press ure level (dB, ref 20 Pa )

M easured in anecho ic roo m at 1m in front o f the unit and 1m below the air discharge o pening

NC-40

NC-35

NC-30

NC-25

NC-20

NC-45

NC-50

Hig h f an

Low fan

Medi m fan

RCM30D/DR NC Curves

125 250 500 1000 2000 4000 8000

Octave- band frequenc y (Hz)

Sound pressure level (dB, ref 20 Pa )

M easured in anecho ic roo m at 1m in front of the unit and 1m below the air discharge opening

NC-40

NC-35

NC-25

NC-20

NC-45

NC-50

Hig h fan

Lo w fan

NC-30

Med m fan

RCM40D/DR NC Curves

125 250 500 1000 2000 4000 8000

Octave-band frequency (Hz)

Sound pressure level (dB, ref 20 Pa)

NC-40

NC-35

NC-25

NC-20

NC-45

NC-50

Hig h f an

Low fan

NC-30

Med um fan

M easured in anecho ic roo m at 1m in front o f the unit and 1m below the air disc harge op ening

RCM50D/DR NC Curves

125 250 500 1000 2000 4000 8000

Octave-band frequency (Hz)

Sound press ure level (dB, ref 20 Pa )

NC-20

NC-30

NC-25

NC-35

NC 4 0

NC-45

NC-50

Lo w f an

Medium fan

Hi gh fa n

M easur ed in anec hoic roo m at 1 m in f ro nt o f t he unit and 1 m bel ow t he air di scharg e

NC-55

RCM61/62 C/CR NC Curves

Ensure the operating temperature is in allowable range.

Cooling only

Cooling

Heat pump

Heating

Cooling

Indoor temp. (°CDB)

Outdoor temp. (°CWB)

-9

15 21

STD

Outdoor temp. (°CDB)

Indoor temp. (°CWB)

-5

STD

HIGH AMBIENT UNIT

LOW AMBIENT KIT

Outdoor temp. (°CDB)

Indoor temp. (°CWB)

-5

S D

HIGH AMBIENT UNIT

LOW A B IENT KIT

The use of your air conditioner outside the range of working temperature and humidity can result in serious failure.

Caution :

4. OPERATING RANGE

5. REFRIGERANT CIRCUIT 5. REFRIGERANT CIRCUIT

MODEL : RCM20D – ALC/A4LC20B

MODEL : RCM25D – ALC/A4LC25B

RCM30D – ALC30B

MODEL : RCM30D – ALC/A4LC30C

RCM40D – ALC35C RCM40D – ALC/A4LC40C RCM50D – ALC/A4LC50C

MODEL : RCM61/62C – ALC61C, A4LC60C/61C

MODEL : RCM20DR – ALC/A4LC20BR

MODEL : RCM25DR – ALC/A4LC25BR

RCM30DR – ALC30BR

MODEL : RCM30DR – ALC/A4LC30CR

RCM40DR – ALC35CR RCM40DR – ALC/A4LC40CR RCM50DR – ALC/A4LC50CR

MODEL : RCM61/62CR – ALC61C/A4LC60CR

NOTE : A4LC30CR WITH TXV ONL

5. PERFORMANCE TABLE . PERFORMANCE TABLE 6. PERFORMANCE TABLE

COOLING ONLY (R22)

MODEL : RCM 20D / ALC 20B

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 5.144 4.937 4.752 4.568 4.134 3.834 3.689 3.633 3.588 SC 5.056 4.868 4.700 4.532 4.102 3.804 3.660 3.605 3.560 15 TC 5.550 5.290 5.058 4.827 4.368 4.052 3.898 3.839 3.791 SC 4.859 4.688 4.536 4.384 3.968 3.680 3.541 3.487 3.444 18 TC 6.658 6.254 5.893 5.532 5.007 4.644 4.468 4.400 4.346 SC 4.319 4.199 4.091 3.983 3.605 3.343 3.217 3.168 3.128

19.4 TC 7.175 6.704 6.283 5.862 5.305 4.921 4.734 4.662 4.604 SC 4.068 3.970 3.883 3.795 3.435 3.186 3.065 3.019 2.981 20 TC 7.397 6.900 6.457 6.014 5.443 5.048 4.857 4.783 4.724 SC 3.960 3.856 3.764 3.671 3.323 3.082 2.965 2.920 2.884 22 TC 8.135 7.556 7.039 6.521 5.902 5.474 5.267 5.187 5.122 SC 3.601 3.478 3.368 3.258 2.949 2.735 2.632 2.591 2.559 24 TC 8.874 8.212 7.620 7.028 6.361 5.900 5.677 5.590 5.521 SC 3.241 3.099 2.972 2.845 2.575 2.388 2.298 2.263 2.235

HIGH AMBIENT

MODEL : RCM 25D / ALC 25B

Indoor

Capacity

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 6.448 6.186 5.951 5.717 5.541 5.260 5.124 5.073 5.031 SC 6.015 5.844 5.691 5.538 5.368 5.095 4.964 4.914 4.874 15 TC 6.956 6.627 6.333 6.039 5.853 5.556 5.413 5.358 5.315 SC 5.576 5.465 5.366 5.266 5.104 4.845 4.720 4.673 4.635 18 TC 8.343 7.831 7.374 6.917 6.704 6.364 6.200 6.137 6.087 SC 4.378 4.431 4.478 4.524 4.385 4.162 4.055 4.014 3.982

19.4 TC 8.990 8.393 7.860 7.327 7.101 6.740 6.567 6.501 6.448 SC 3.819 3.948 4.063 4.178 4.050 3.844 3.745 3.707 3.677 20 TC 9.267 8.639 8.079 7.519 7.287 6.917 6.739 6.671 6.616 SC 3.579 3.715 3.835 3.956 3.834 3.639 3.546 3.510 3.482 22 TC 10.191 9.461 8.809 8.157 7.905 7.504 7.311 7.237 7.178 SC 2.781 2.937 3.077 3.216 3.117 2.959 2.883 2.854 2.830 24 TC 11.116 10.283 9.539 8.795 8.524 8.091 7.883 7.803 7.740 SC 1.982 2.160 2.318 2.476 2.400 2.278 2.219 2.197 2.179

HIGH AMBIENT

MODEL : RCM 30D / ALC 30B

Indoor

Capacity

Outdoor DB, ° C

° C ° C kW 19.4 25 30 35 40 46

26.7 13.9 TC 7.230 6.891 6.588 6.285 5.982 5.618 SC 7.230 6.891 6.588 6.285 5.982 5.618 15 TC 7.840 7.399 7.005 6.610 6.216 5.743 SC 6.943 6.625 6.341 6.056 5.772 5.431 18 TC 9.505 8.785 8.142 7.499 6.856 6.084 SC 6.161 5.899 5.666 5.433 5.200 4.920

19.4 TC 10.282 9.432 8.673 7.913 7.154 6.243 SC 5.795 5.561 5.352 5.142 4.933 4.682 20 TC 10.615 9.736 8.950 8.165 7.379 6.437 SC 5.639 5.404 5.195 4.985 4.776 4.525 22 TC 11.725 10.748 9.876 9.003 8.131 7.084 SC 5.117 4.882 4.672 4.462 4.252 4.001 24 TC 12.835 11.761 10.801 9.842 8.883 7.731 SC 4.596 4.360 4.150 3.939 3.729 3.476

MODEL : RCM 30D / ALC 30C

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 7.784 7.460 7.170 6.880 6.550 6.206 5.938 5.792 5.639 SC 7.088 6.910 6.751 6.592 6.276 5.946 5.689 5.550 5.403 15 TC 8.383 7.981 7.622 7.263 6.914 6.551 6.268 6.114 5.953 SC 6.942 6.743 6.566 6.389 6.083 5.763 5.514 5.379 5.236 18 TC 10.017 9.403 8.854 8.306 7.907 7.492 7.168 6.993 6.807 SC 6.543 6.289 6.062 5.835 5.555 5.263 5.036 4.913 4.783

19.4 TC 10.779 10.066 9.429 8.792 8.371 7.931 7.588 7.402 7.206 SC 6.358 6.077 5.827 5.577 5.309 5.030 4.813 4.695 4.571 20 TC 11.106 10.357 9.688 9.019 8.587 8.136 7.784 7.593 7.392 SC 6.278 5.980 5.714 5.448 5.187 4.914 4.702 4.586 4.465 22 TC 12.195 11.326 10.551 9.775 9.307 8.817 8.437 8.230 8.012 SC 6.013 5.655 5.337 5.018 4.777 4.526 4.331 4.224 4.113 24 TC 13.284 12.296 11.414 10.531 10.026 9.499 9.089 8.866 8.632 SC 5.747 5.331 4.959 4.588 4.368 4.138 3.959 3.862 3.760

HIGH AMBIENT

MODEL : RCM 40D / ALC 35C

Indoor

Capacity

Outdoor DB, ° C

° C ° C kW 19.4 25 30 35 40 46

26.7 13.9 TC 9.516 9.046 8.626 8.207 7.787 7.283 SC 8.545 8.279 8.042 7.805 7.568 7.283 15 TC 10.375 9.744 9.180 8.617 8.054 7.377 SC 8.425 8.145 7.896 7.647 7.398 7.098 18 TC 12.715 11.646 10.691 9.736 8.781 7.635 SC 8.096 7.780 7.498 7.215 6.933 6.594

19.4 TC 13.808 12.533 11.396 10.258 9.120 7.755 SC 7.943 7.610 7.312 7.014 6.716 6.359 20 TC 14.276 12.965 11.795 10.625 9.455 8.051 SC 7.877 7.513 7.188 6.863 6.538 6.148 22 TC 15.836 14.405 13.126 11.848 10.570 9.036 SC 7.658 7.192 6.776 6.360 5.944 5.445 24 TC 17.396 15.844 14.458 13.072 11.685 10.022 SC 7.439 6.871 6.364 5.857 5.350 4.742

MODEL : RCM 40D / ALC 40C

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 10.091 9.719 9.387 9.054 8.291 7.526 7.240 7.165 7.134 SC 9.671 9.387 9.134 8.881 8.133 7.382 7.101 7.027 6.997 15 TC 11.057 10.530 10.059 9.588 8.780 7.970 7.667 7.587 7.555 SC 9.466 9.182 8.928 8.675 7.944 7.210 6.937 6.864 6.835 18 TC 13.694 12.742 11.893 11.044 10.113 9.180 8.831 8.739 8.702 SC 8.907 8.622 8.367 8.113 7.429 6.743 6.487 6.420 6.392

19.4 TC 14.924 13.775 12.749 11.723 10.736 9.744 9.374 9.277 9.237 SC 8.646 8.360 8.105 7.850 7.189 6.525 6.277 6.212 6.185 20 TC 15.451 14.246 13.170 12.093 11.074 10.052 9.670 9.569 9.529 SC 8.534 8.218 7.935 7.652 7.008 6.361 6.119 6.056 6.030 22 TC 17.208 15.815 14.571 13.327 12.204 11.077 10.657 10.545 10.500 SC 8.162 7.742 7.367 6.993 6.404 5.812 5.592 5.534 5.510 24 TC 18.966 17.384 15.972 14.560 13.333 12.102 11.643 11.522 11.472 SC 7.789 7.266 6.800 6.333 5.800 5.264 5.064 5.012 4.990

HIGH AMBIENT

MODEL : RCM 50D / ALC 50C

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 12.749 12.256 11.815 11.374 10.717 10.114 9.762 9.601 9.451 SC 11.176 11.014 10.869 10.724 10.104 9.535 9.204 9.052 8.910 15 TC 14.011 13.300 12.665 12.030 11.335 10.697 10.325 10.155 9.996 SC 10.996 10.774 10.575 10.377 9.777 9.227 8.906 8.760 8.622 18 TC 17.454 16.149 14.984 13.819 13.020 12.288 11.861 11.665 11.482 SC 10.505 10.119 9.775 9.431 8.886 8.386 8.095 7.961 7.836

19.4 TC 19.060 17.478 16.066 14.654 13.807 13.031 12.578 12.370 12.176 SC 10.275 9.814 9.402 8.990 8.470 7.994 7.716 7.589 7.469 20 TC 19.748 18.098 16.624 15.151 14.275 13.472 13.004 12.789 12.589 SC 10.177 9.681 9.238 8.796 8.287 7.821 7.549 7.425 7.308 22 TC 22.043 20.163 18.485 16.806 15.834 14.944 14.424 14.187 13.964 SC 9.849 9.239 8.694 8.149 7.678 7.246 6.994 6.879 6.771 24 TC 24.338 22.228 20.345 18.461 17.394 16.416 15.845 15.584 15.339 SC 9.522 8.797 8.149 7.502 7.068 6.670 6.439 6.332 6.233

MODEL : RCM 61/62 C / ALC 61C

Indoor

Capacity

Outdoor

DB, °C

°C °C kW 19.4 25 30 35 40 46

26.7 13.9 TC 15.426 14.631 13.922 13.213 12.504 11.653 SC 15.426 14.631 13.922 13.213 12.504 11.653 15 TC 16.454 15.520 14.687 13.853 13.019 12.019 SC 14.771 14.033 13.374 12.714 12.055 11.264 18 TC 19.260 17.945 16.772 15.598 14.425 13.016 SC 12.987 12.401 11.878 11.354 10.830 10.202

19.4 TC 20.569 19.077 17.745 16.413 15.080 13.482 SC 12.155 11.639 11.179 10.719 10.259 9.707 20 TC 21.130 19.590 18.215 16.840 15.465 13.815 SC 11.798 11.290 10.837 10.383 9.930 9.386 22 TC 23.001 21.301 19.783 18.265 16.747 14.925 SC 10.609 10.126 9.695 9.264 8.833 8.316 24 TC 24.871 23.011 21.350 19.689 18.028 16.035 SC 9.419 8.962 8.553 8.145 7.736 7.246

All the data above are based on 26.7°C entering DB. To obtain data for different entering DB, please use the formula below :

Sensible capacity (EDB) = Sensible capacity (26.7) + 1.23 x L/s x (1 - BPF) ( EDB - 26.7 ) / 1000

Where, BPF = Bypass factor EDB = Entering dry bulb temperature, ° C

RCM 20D

ALC 20B

RCM 25D

ALC 25B

RCM 30D

ALC 30B

RCM 30D ALC 30C

RCM 40D

ALC 35C

RCM 40D

ALC 40C

RCM 50D

ALC 50C

RCM 61C

ALC 61C

Bypass factor 0.50 0.44 0.30 0.42 0.64 0.51 0.44 0.55

COOLING ONLY (R407C)

MODEL : RCM 20D / A4LC 20B

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 4.706 4.517 4.348 4.180 3.783 3.508 3.376 3.324 3.283 SC 4.627 4.454 4.300 4.147 3.753 3.481 3.349 3.298 3.257 15 TC 5.078 4.841 4.628 4.416 3.997 3.707 3.567 3.512 3.469 SC 4.446 4.290 4.151 4.012 3.631 3.368 3.240 3.191 3.151 18 TC 6.092 5.722 5.392 5.062 4.582 4.249 4.089 4.026 3.976 SC 3.952 3.842 3.743 3.644 3.298 3.059 2.943 2.898 2.863

19.4 TC 6.565 6.134 5.749 5.363 4.854 4.502 4.332 4.266 4.213 SC 3.722 3.633 3.553 3.473 3.143 2.915 2.805 2.762 2.728 20 TC 6.768 6.314 5.908 5.503 4.980 4.619 4.444 4.376 4.322 SC 3.623 3.529 3.444 3.359 3.040 2.820 2.713 2.672 2.639 22 TC 7.444 6.914 6.440 5.967 5.400 5.009 4.819 4.746 4.687 SC 3.295 3.182 3.082 2.981 2.698 2.503 2.408 2.371 2.342 24 TC 8.120 7.514 6.972 6.431 5.821 5.398 5.194 5.115 5.052 SC 2.966 2.836 2.719 2.603 2.356 2.185 2.102 2.070 2.045

HIGH AMBIENT

MODEL : RCM 25D / A4LC 25B

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 5.416 5.196 4.999 4.803 4.655 4.418 4.305 4.261 4.226 SC 5.053 4.909 4.781 4.652 4.509 4.280 4.170 4.128 4.094 15 TC 5.843 5.567 5.320 5.073 4.917 4.667 4.547 4.501 4.464 SC 4.684 4.590 4.507 4.424 4.288 4.070 3.965 3.925 3.893 18 TC 7.008 6.578 6.194 5.811 5.632 5.345 5.208 5.155 5.113 SC 3.678 3.722 3.761 3.801 3.683 3.496 3.406 3.372 3.345

19.4 TC 7.551 7.050 6.602 6.155 5.965 5.662 5.517 5.461 5.416 SC 3.208 3.316 3.413 3.510 3.402 3.229 3.146 3.114 3.089 20 TC 7.784 7.257 6.786 6.316 6.121 5.810 5.661 5.603 5.558 SC 3.007 3.120 3.222 3.323 3.221 3.057 2.979 2.948 2.924 22 TC 8.561 7.947 7.399 6.852 6.641 6.303 6.141 6.079 6.030 SC 2.336 2.467 2.584 2.702 2.618 2.485 2.421 2.397 2.377 24 TC 9.337 8.637 8.013 7.388 7.160 6.796 6.622 6.554 6.501 SC 1.665 1.814 1.947 2.080 2.016 1.913 1.864 1.845 1.830

HIGH AMBIENT

MODEL : RCM 30D / A4LC 30C

Indoor

Capacit

Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 7.784 7.460 7.170 6.880 6.550 6.206 5.938 5.792 5.639 SC 7.088 6.910 6.751 6.592 6.276 5.946 5.689 5.550 5.403 15 TC 8.383 7.981 7.622 7.263 6.914 6.551 6.268 6.114 5.953 SC 6.942 6.743 6.566 6.389 6.083 5.763 5.514 5.379 5.236 18 TC 10.017 9.403 8.854 8.306 7.907 7.492 7.168 6.992 6.807 SC 6.543 6.289 6.062 5.835 5.555 5.263 5.036 4.913 4.783

HIGH AMBIENT

MODEL : RCM 40D / A4LC 40C

Indoor

WB Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 9.586 9.233 8.917 8.602 7.877 7.150 6.878 6.807 6.777 SC 9.188 8.918 8.677 8.437 7.726 7.013 6.746 6.676 6.648 15 TC 10.505 10.004 9.556 9.109 8.341 7.571 7.284 7.208 7.177 SC 8.993 8.723 8.482 8.241 7.547 6.850 6.590 6.521 6.493 18 TC 13.009 12.105 11.299 10.492 9.608 8.721 8.390 8.302 8.267 SC 8.462 8.191 7.949 7.707 7.058 6.406 6.163 6.099 6.073

19.4 TC 14.178 13.086 12.112 11.137 10.199 9.257 8.906 8.813 8.775 SC 8.214 7.942 7.700 7.458 6.829 6.199 5.964 5.902 5.876 20 TC 14.678 13.533 12.511 11.489 10.521 9.549 9.187 9.091 9.052 SC 8.108 7.807 7.538 7.270 6.657 6.043 5.813 5.753 5.728 22 TC 16.348 15.024 13.842 12.660 11.594 10.523 10.124 10.018 9.975 SC 7.753 7.355 6.999 6.643 6.083 5.522 5.312 5.257 5.234 24 TC 18.018 16.515 15.174 13.832 12.667 11.497 11.061 10.945 10.899 SC 7.399 6.903 6.460 6.017 5.510 5.001 4.811 4.761 4.741

HIGH AMBIENT

MODEL : RCM 50D / A4LC 50C

Indoor

Capacit

y Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 12.749 12.256 11.815 11.374 10.717 10.114 9.762 9.602 9.451 SC 11.176 11.014 10.869 10.724 10.104 9.535 9.204 9.053 8.910 15 TC 14.011 13.300 12.665 12.030 11.335 10.697 10.325 10.156 9.996 SC 10.996 10.774 10.575 10.377 9.777 9.227 8.906 8.760 8.622 18 TC 17.454 16.149 14.984 13.819 13.020 12.288 11.861 11.666 11.482 SC 10.505 10.119 9.775 9.431 8.886 8.386 8.095 7.961 7.836

19.4 TC 19.060 17.478 16.066 14.654 13.807 13.031 12.578 12.371 12.176 SC 10.275 9.814 9.402 8.990 8.470 7.994 7.716 7.589 7.469 20 TC 19.748 18.098 16.624 15.151 14.275 13.472 13.004 12.790 12.589 SC 10.177 9.681 9.238 8.796 8.287 7.821 7.549 7.425 7.308 22 TC 22.043 20.163 18.485 16.806 15.834 14.944 14.424 14.187 13.964 SC 9.849 9.239 8.694 8.149 7.678 7.246 6.994 6.879 6.771 24 TC 24.338 22.228 20.345 18.461 17.394 16.416 15.845 15.585 15.339 SC 9.522 8.797 8.149 7.502 7.068 6.670 6.439 6.333 6.233

HIGH AMBIENT

MODEL : RCM 61/62C / A4LC 61C

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46

26.7 13.9 TC 14.875 14.109 13.425 12.741 12.057 11.237 SC 14.875 14.109 13.425 12.741 12.057 11.237 15 TC 15.867 14.966 14.162 13.358 12.554 11.590 SC 14.244 13.532 12.896 12.260 11.624 10.861 18 TC 18.572 17.304 16.173 15.041 13.909 12.551 SC 12.524 11.958 11.453 10.949 10.444 9.838

19.4 TC 19.835 18.396 17.111 15.826 14.542 13.000 SC 11.721 11.224 10.780 10.336 9.893 9.360 20 TC 20.376 18.891 17.565 16.239 14.913 13.321 SC 11.377 10.887 10.450 10.013 9.575 9.051 22 TC 22.179 20.540 19.076 17.612 16.148 14.392 SC 10.230 9.764 9.349 8.933 8.518 8.019 24 TC 23.983 22.189 20.587 18.986 17.384 15.462 SC 9.083 8.642 8.248 7.854 7.460 6.987

All the data above are based on 26.7°C entering DB. To obtain data for different entering DB, please use the formula below :

Sensible capacity (EDB) = Sensible capacity (26.7) + 1.23 x L/s x (1 - BPF) ( EDB - 26.7 ) / 1000

Where, BPF = Bypass factor EDB = Entering dry bulb temperature, ° C

RCM 20D

A4LC 20B

RCM 25D

A4LC 25B

RCM 30D

A4LC 30C

RCM 40D

A4LC 40C

RCM 50D

A4LC 50C

RCM 61/62C

A4LC 61C

Bypass factor 0.50 0.44 0.42 0.51 0.44 0.29

HEAT PUMP MODEL – R22

MODEL : RCM 20DR / ALC 20BR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 5.106 4.907 4.729 4.552 4.120 3.821 3.677 3.621 3.576 SC 4.748 4.625 4.514 4.404 3.986 3.697 3.557 3.503 3.460 15 TC 5.600 5.318 5.066 4.814 4.357 4.041 3.888 3.829 3.781 SC 4.633 4.503 4.388 4.272 3.867 3.586 3.450 3.398 3.356 18 TC 6.949 6.439 5.984 5.528 5.004 4.641 4.465 4.397 4.343 SC 4.318 4.172 4.042 3.912 3.540 3.284 3.159 3.112 3.073

19.4 TC 7.578 6.962 6.412 5.862 5.305 4.921 4.734 4.663 4.604 SC 4.172 4.018 3.881 3.744 3.388 3.143 3.024 2.978 2.941 20 TC 7.848 7.205 6.630 6.055 5.481 5.083 4.891 4.816 4.757 SC 4.109 3.943 3.796 3.648 3.302 3.062 2.946 2.902 2.866 22 TC 8.747 8.013 7.357 6.702 6.065 5.626 5.413 5.331 5.264 SC 3.899 3.694 3.512 3.329 3.013 2.794 2.689 2.648 2.615 24 TC 9.646 8.821 8.084 7.348 6.650 6.168 5.935 5.845 5.772 SC 3.689 3.445 3.228 3.010 2.724 2.527 2.431 2.394 2.364

HIGH AMBIENT

MODEL : RCM 25DR / ALC 25BR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 5.832 5.656 5.498 5.341 5.176 4.913 4.787 4.740 4.700 SC 4.618 4.697 4.768 4.839 4.690 4.451 4.337 4.295 4.258 15 TC 6.281 6.065 5.872 5.679 5.504 5.225 5.090 5.040 4.998 SC 4.558 4.623 4.680 4.738 4.592 4.359 4.247 4.205 4.170 18 TC 7.503 7.180 6.891 6.603 6.400 6.074 5.918 5.860 5.811 SC 4.395 4.420 4.442 4.464 4.326 4.106 4.001 3.962 3.928

19.4 TC 8.073 7.700 7.367 7.034 6.817 6.471 6.305 6.243 6.190 SC 4.319 4.325 4.330 4.336 4.202 3.989 3.886 3.848 3.816 20 TC 8.318 7.909 7.544 7.179 6.958 6.604 6.434 6.372 6.317 SC 4.286 4.260 4.237 4.214 4.084 3.876 3.777 3.740 3.708 22 TC 9.132 8.604 8.133 7.661 7.425 7.048 6.867 6.799 6.742 SC 4.177 4.044 3.926 3.807 3.690 3.503 3.413 3.379 3.351 24 TC 9.947 9.300 8.722 8.144 7.893 7.492 7.299 7.228 7.167 SC 4.068 3.829 3.615 3.401 3.296 3.129 3.048 3.019 2.993

HIGH AMBIENT

MODEL : RCM 30DR / ALC 30CR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 7.547 7.272 7.027 6.782 6.457 6.117 5.853 5.710 5.559 SC 7.338 7.107 6.902 6.696 6.375 6.040 5.779 5.637 5.488 15 TC 8.219 7.848 7.516 7.184 6.840 6.480 6.200 6.048 5.888 SC 7.149 6.904 6.686 6.468 6.157 5.834 5.582 5.445 5.301 18 TC 10.053 9.417 8.849 8.281 7.884 7.469 7.147 6.972 6.787 SC 6.634 6.351 6.098 5.846 5.565 5.273 5.045 4.922 4.791

19.4 TC 10.908 10.149 9.471 8.792 8.371 7.931 7.588 7.402 7.206 SC 6.393 6.092 5.824 5.555 5.289 5.011 4.794 4.677 4.553 20 TC 11.275 10.474 9.758 9.043 8.609 8.157 7.804 7.613 7.412 SC 6.290 5.978 5.699 5.420 5.160 4.889 4.678 4.563 4.442 22 TC 12.497 11.557 10.717 9.877 9.403 8.909 8.524 8.315 8.095 SC 5.946 5.596 5.283 4.970 4.731 4.483 4.289 4.184 4.073 24 TC 13.719 12.640 11.675 10.711 10.198 9.662 9.244 9.017 8.779 SC 5.602 5.214 4.866 4.519 4.302 4.076 3.900 3.805 3.704

HIGH AMBIENT

MODEL : RCM 40DR / ALC 40CR (COOLING MODE)

Indoor

Capacit

y Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 9.748 9.448 9.180 8.913 8.162 7.408 7.127 7.0529 7.022 SC 9.649 9.370 9.121 8.872 8.124 7.374 7.094 7.0204 6.990 15 TC 10.889 10.381 9.928 9.475 8.676 7.875 7.576 7.4976 7.465 SC 9.438 9.136 8.867 8.597 7.873 7.146 6.875 6.8028 6.774 18 TC 14.000 12.926 11.967 11.008 10.080 9.150 8.802 8.7106 8.673 SC 8.861 8.498 8.173 7.849 7.188 6.524 6.276 6.2109 6.184

19.4 TC 15.452 14.113 12.918 11.723 10.736 9.744 9.374 9.2764 9.237 SC 8.592 8.200 7.850 7.500 6.868 6.234 5.997 5.9348 5.909 20 TC 16.074 14.669 13.415 12.161 11.136 10.108 9.725 9.6230 9.582 SC 8.476 8.063 7.694 7.325 6.708 6.089 5.857 5.7963 5.772 22 TC 18.148 16.523 15.072 13.620 12.473 11.321 10.891 10.7775 10.732 SC 8.092 7.607 7.175 6.743 6.175 5.605 5.392 5.3357 5.313 24 TC 20.222 18.376 16.728 15.080 13.809 12.534 12.058 11.9328 11.882 SC 7.707 7.152 6.656 6.160 5.641 5.121 4.926 4.8744 4.854

HIGH AMBIENT

MODEL : RCM 50DR / ALC 50CR (COOLING MODE)

Indoor

Capacit

y Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 11.782 11.404 11.067 10.730 10.110 9.541 9.209 9.058 8.915 SC 11.375 11.083 10.822 10.562 9.951 9.392 9.065 8.916 8.776 15 TC 13.270 12.598 11.998 11.398 10.739 10.135 9.782 9.622 9.470 SC 11.098 10.742 10.425 10.108 9.523 8.988 8.675 8.533 8.398 18 TC 17.328 15.853 14.536 13.218 12.454 11.754 11.345 11.158 10.983 SC 10.341 9.813 9.341 8.869 8.357 7.887 7.612 7.487 7.369

19.4 TC 19.222 17.372 15.720 14.068 13.255 12.509 12.074 11.876 11.689 SC 9.988 9.379 8.835 8.291 7.812 7.373 7.116 6.999 6.889 20 TC 20.034 18.104 16.380 14.657 13.810 13.033 12.580 12.373 12.178 SC 9.837 9.219 8.667 8.115 7.646 7.216 6.965 6.850 6.742 22 TC 22.739 20.542 18.581 16.620 15.659 14.779 14.265 14.030 13.809 SC 9.332 8.684 8.105 7.526 7.091 6.692 6.460 6.353 6.253 24 TC 25.445 22.981 20.782 18.583 17.509 16.524 15.949 15.687 15.440 SC 8.828 8.149 7.544 6.938 6.537 6.169 5.955 5.857 5.764

HIGH AMBIENT

MODEL : RCM 61/62CR / ALC 61CR (COOLING MODE)

Indoor

WB Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46

26.7 13.9 TC 15.134 14.401 13.747 13.093 12.438 11.653 SC 15.134 14.401 13.747 13.093 12.438 11.653 15 TC 16.319 15.399 14.578 13.757 12.936 11.950 SC 14.608 13.894 13.256 12.618 11.980 11.214 18 TC 19.548 18.119 16.843 15.568 14.292 12.761 SC 13.174 12.510 11.917 11.323 10.730 10.018

19.4 TC 21.055 19.389 17.901 16.413 14.925 13.139 SC 12.505 11.864 11.292 10.719 10.147 9.460 20 TC 21.701 19.978 18.440 16.901 15.363 13.517 SC 12.218 11.577 11.004 10.431 9.859 9.171 22 TC 23.854 21.943 20.237 18.530 16.824 14.776 SC 11.262 10.619 10.045 9.471 8.897 8.209 24 TC 26.008 23.908 22.034 20.159 18.285 16.035 SC 10.306 9.662 9.087 8.511 7.936 7.246

Indoor RCM20DR RCM25DR RCM30DR RCM40DR RCM50DR RCM61/62CR Outdoor ALC20BR ALC25BR ALC30CR ALC40CR ALC50CR ALC61CR Bypass Factor 0.51 0.60 0.36 0.42 0.31 0.29

HEATING MODE – R22

MODEL : RCM 20DR / ALC 20BR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 3.552 3.561 3.570 3.579 3.466 3.366

SC 3.552 3.561 3.570 3.579 3.466 3.366

-5.0 TC 3.858 3.823 3.789 3.754 3.702 3.655

SC 3.858 3.823 3.789 3.754 3.702 3.655

FROST REGION

6.0 TC 4.698 5.183 5.669 6.155 5.259 4.452

SC 4.698 5.183 5.669 6.155 5.259 4.452

12.0 TC 5.156 5.110 5.064 5.018 4.949 4.887

SC 5.156 5.110 5.064 5.018 4.949 4.887

15.0 TC 5.385 5.337 5.289 5.241 5.169 5.104

SC 5.385 5.337 5.289 5.241 5.169 5.104

18.3 TC 5.637 5.587 5.536 5.486 5.411 5.343

SC 5.637 5.587 5.536 5.486 5.411 5.343

MODEL : RCM 25DR / ALC 25BR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 4.090 4.072 4.054 4.036 3.951 3.875

SC 4.090 4.072 4.054 4.036 3.951 3.875

-5.0 TC 4.603 4.561 4.520 4.479 4.417 4.361

SC 4.603 4.561 4.520 4.479 4.417 4.361

FROST REGION

6.0 TC 6.012 6.450 6.889 7.327 6.470 5.698

SC 6.012 6.450 6.889 7.327 6.470 5.698

12.0 TC 6.781 6.720 6.660 6.599 6.508 6.427

SC 6.781 6.720 6.660 6.599 6.508 6.427

15.0 TC 7.165 7.101 7.037 6.973 6.878 6.791

SC 7.165 7.101 7.037 6.973 6.878 6.791

18.3 TC 7.588 7.520 7.453 7.385 7.284 7.192

SC 7.588 7.520 7.453 7.385 7.284 7.192

MODEL : RCM 30DR / ALC 30CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 5.802 5.731 5.660 5.589 5.541 5.497

SC 5.802 5.731 5.660 5.589 5.541 5.497

-5.0 TC 6.788 6.727 6.666 6.605 6.514 6.432

SC 6.788 6.727 6.666 6.605 6.514 6.432

FROST REGION

6.0 TC 9.498 9.458 9.419 9.379 9.180 9.002

SC 9.498 9.458 9.419 9.379 9.180 9.002

12.0 TC 10.977 10.879 10.781 10.683 10.536 10.404

SC 10.977 10.879 10.781 10.683 10.536 10.404

15.0 TC 11.716 11.611 11.507 11.402 11.246 11.105

SC 11.716 11.611 11.507 11.402 11.246 11.105

18.3 TC 12.529 12.417 12.306 12.194 12.026 11.876

SC 12.529 12.417 12.306 12.194 12.026 11.876

MODEL : RCM 40DR / ALC 40CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 6.456 6.337 6.218 6.099 6.108 6.117

SC 6.456 6.337 6.218 6.099 6.108 6.117

-5.0 TC 7.779 7.709 7.640 7.570 7.465 7.371

SC 7.779 7.709 7.640 7.570 7.465 7.371

FROST REGION

6.0 TC 11.419 11.618 11.817 12.016 11.388 10.822

SC 11.419 11.618 11.817 12.016 11.388 10.822

12.0 TC 13.404 13.284 13.165 13.045 12.866 12.704

SC 13.404 13.284 13.165 13.045 12.866 12.704

15.0 TC 14.396 14.268 14.139 14.011 13.819 13.645

SC 14.396 14.268 14.139 14.011 13.819 13.645

18.3 TC 15.488 15.350 15.212 15.074 14.867 14.681

SC 15.488 15.350 15.212 15.074 14.867 14.681

MODEL : RCM 50DR / ALC 50CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 8.278 8.196 8.115 8.033 7.933 7.843

SC 8.278 8.196 8.115 8.033 7.933 7.843

-5.0 TC 9.570 9.484 9.398 9.312 9.184 9.068

SC 9.570 9.484 9.398 9.312 9.184 9.068

FROST REGION

6.0 TC 13.123 13.438 13.753 14.068 13.210 12.437

SC 13.123 13.438 13.753 14.068 13.210 12.437

12.0 TC 15.061 14.927 14.792 14.658 14.456 14.275

SC 15.061 14.927 14.792 14.658 14.456 14.275

15.0 TC 16.030 15.887 15.744 15.601 15.387 15.194

SC 16.030 15.887 15.744 15.601 15.387 15.194

18.3 TC 17.096 16.943 16.791 16.639 16.410 16.205

SC 17.096 16.943 16.791 16.639 16.410 16.205

MODEL : RCM 61/62CR / ALC 61CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 9.390 9.251 9.113 8.974 8.933 8.896

SC 9.390 9.251 9.113 8.974 8.933 8.896

-5.0 TC 11.118 11.018 10.918 10.819 10.669 10.535

SC 11.118 11.018 10.918 10.819 10.669 10.535

FROST REGION

6.0 TC 15.870 16.051 16.232 16.413 15.691 15.041

SC 15.870 16.051 16.232 16.413 15.691 15.041

12.0 TC 18.462 18.297 18.132 17.968 17.721 17.498

SC 18.462 18.297 18.132 17.968 17.721 17.498

15.0 TC 19.758 19.582 19.406 19.229 18.965 18.727

SC 19.758 19.582 19.406 19.229 18.965 18.727

18.3 TC 21.183 20.995 20.806 20.617 20.334 20.079

SC 21.183 20.995 20.806 20.617 20.334 20.079

HEATPUMP MODEL – R407C

MODEL : RCM 20DR / A4LC 20BR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 4.595 4.416 4.256 4.097 3.708 3.439 3.309 2.369 3.218 SC 4.273 4.162 4.063 3.964 3.588 3.327 3.201 2.291 3.114 15 TC 5.040 4.786 4.559 4.333 3.921 3.637 3.499 2.505 3.403 SC 4.169 4.053 3.949 3.845 3.480 3.228 3.105 2.222 3.020 18 TC 6.254 5.795 5.385 4.975 4.503 4.177 4.019 2.877 3.908 SC 3.886 3.755 3.638 3.521 3.186 2.955 2.844 2.036 2.765

19.4 TC 6.820 6.266 5.771 5.275 4.775 4.428 4.261 3.050 4.144 SC 3.754 3.616 3.493 3.369 3.049 2.828 2.721 1.948 2.647 20 TC 7.063 6.484 5.967 5.450 4.933 4.575 4.402 3.151 4.281 SC 3.698 3.549 3.416 3.283 2.971 2.756 2.652 1.898 2.579 22 TC 7.873 7.212 6.622 6.031 5.459 5.063 4.871 3.487 4.738 SC 3.509 3.325 3.160 2.996 2.712 2.515 2.420 1.732 2.353 24 TC 8.682 7.939 7.276 6.613 5.985 5.551 5.341 3.823 5.195 SC 3.321 3.101 2.905 2.709 2.452 2.274 2.188 1.566 2.128

HIGH AMBIENT

MODEL : RCM 25DR / A4LC 25BR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 4.982 4.831 4.696 4.562 4.421 4.197 4.089 3.099 4.015 SC 3.945 4.012 4.073 4.133 4.006 3.802 3.704 2.807 3.637 15 TC 5.365 5.180 5.016 4.851 4.702 4.463 4.348 3.296 4.269 SC 3.893 3.949 3.998 4.047 3.922 3.723 3.627 2.749 3.562 18 TC 6.409 6.133 5.886 5.640 5.466 5.189 5.055 3.831 4.963 SC 3.754 3.775 3.794 3.813 3.695 3.508 3.417 2.590 3.355

19.4 TC 6.896 6.577 6.293 6.008 5.823 5.527 5.385 4.082 5.287 SC 3.689 3.694 3.699 3.703 3.589 3.407 3.319 2.516 3.259 20 TC 7.105 6.755 6.444 6.132 5.943 5.641 5.496 4.166 5.396 SC 3.661 3.639 3.619 3.599 3.488 3.311 3.226 2.445 3.167 22 TC 7.801 7.350 6.947 6.544 6.342 6.020 5.865 4.445 5.759 SC 3.568 3.454 3.353 3.252 3.152 2.992 2.915 2.209 2.862 24 TC 8.497 7.944 7.450 6.956 6.742 6.399 6.235 4.726 6.122 SC 3.475 3.270 3.088 2.905 2.816 2.673 2.604 1.974 2.557

HIGH AMBIENT

MODEL : RCM 30DR / A4LC 30CR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 7.295 7.030 6.793 6.556 6.242 5.914 5.658 4.605 5.373 SC 7.094 6.871 6.672 6.472 6.162 5.838 5.586 4.546 5.305 15 TC 7.945 7.586 7.265 6.945 6.612 6.264 5.994 4.878 5.692 SC 6.911 6.674 6.463 6.252 5.952 5.639 5.396 4.392 5.124 18 TC 9.717 9.103 8.554 8.005 7.621 7.220 6.908 5.622 6.561 SC 6.412 6.139 5.895 5.651 5.380 5.097 4.877 3.969 4.631

19.4 TC 10.545 9.810 9.155 8.499 8.092 7.667 7.335 5.970 6.966 SC 6.180 5.889 5.630 5.370 5.113 4.844 4.635 3.772 4.401 20 TC 10.899 10.124 9.433 8.741 8.322 7.885 7.544 6.140 7.164 SC 6.080 5.778 5.509 5.239 4.988 4.726 4.522 3.680 4.294 22 TC 12.081 11.171 10.360 9.548 9.090 8.612 8.240 6.706 7.825 SC 5.748 5.409 5.107 4.804 4.574 4.333 4.146 3.374 3.937 24 TC 13.262 12.218 11.286 10.354 9.858 9.340 8.936 7.273 8.486 SC 5.416 5.040 4.704 4.369 4.159 3.940 3.770 3.068 3.580

HIGH AMBIENT

HEATPUMP MODEL – R407C

MODEL : RCM 40DR / A4LC 40CR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

26.7 13.9 TC 9.504 9.212 8.951 8.690 7.958 7.223 6.949 5.361 6.847 SC 9.408 9.136 8.893 8.650 7.921 7.190 6.917 5.337 6.815 15 TC 10.616 10.122 9.680 9.238 8.459 7.679 7.387 5.699 7.279 SC 9.202 8.908 8.645 8.382 7.676 6.967 6.703 5.171 6.605 18 TC 13.650 12.603 11.668 10.733 9.828 8.921 8.582 6.621 8.456 SC 8.639 8.285 7.969 7.653 7.008 6.361 6.119 4.721 6.030

19.4 TC 15.065 13.760 12.595 11.430 10.467 9.501 9.140 7.052 9.006 SC 8.377 7.995 7.653 7.312 6.696 6.078 5.847 4.511 5.761 20 TC 15.672 14.303 13.080 11.857 10.858 9.856 9.481 7.315 9.342 SC 8.264 7.861 7.502 7.142 6.540 5.936 5.711 4.406 5.627 22 TC 17.694 16.110 14.695 13.280 12.161 11.038 10.619 8.193 10.464 SC 7.889 7.417 6.996 6.574 6.020 5.464 5.257 4.056 5.180 24 TC 19.717 17.917 16.310 14.703 13.464 12.221 11.757 9.071 11.585 SC 7.514 6.973 6.490 6.006 5.500 4.993 4.803 3.706 4.733

HIGH AMBIENT

MODEL : RCM 50DR / A4LC 50CR (COOLING MODE)

Indoor

Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46 50 52 54

HIGH AMBIENT

MODEL : RCM 61/62CR / A4LC 61CR (COOLING MODE)

Indoor

WB Capacity Outdoor DB, °C

°C °C kW 19.4 25 30 35 40 46

26.7 13.9 TC 14.344 13.605 12.946 12.286 11.627 10.836 SC 14.344 13.605 12.946 12.286 11.627 10.836 15 TC 15.301 14.432 13.656 12.881 12.106 11.176 SC 13.735 13.049 12.436 11.822 11.209 10.473 18 TC 17.909 16.686 15.596 14.504 13.412 12.103 SC 12.077 11.531 11.044 10.558 10.071 9.487

19.4 TC 19.127 17.739 16.500 15.261 14.023 12.536 SC 11.303 10.823 10.395 9.967 9.540 9.026 20 TC 19.649 18.217 16.938 15.659 14.381 12.845 SC 10.971 10.498 10.077 9.656 9.233 8.728 22 TC 21.387 19.807 18.395 16.983 15.572 13.878 SC 9.865 9.415 9.015 8.614 8.214 7.733 24 TC 23.127 21.397 19.852 18.308 16.763 14.910 SC 8.759 8.333 7.954 7.574 7.194 6.738

Indoor RCM20DR RCM25DR RCM30DR RCM40DR RCM50DR RCM61/62CR

Outdoor A4LC20BR A4LC25BR A4LC30CR A4LC40CR A4LC50CR A4LC61CR

Bypass Factor 0.51 0.60 0.36 0.42 0.31 0.29

HEATING MODE – R407C

MODEL : RCM 20DR / A4LC 20BR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 3.214 3.222 3.230 3.238 3.136 3.045

SC 3.214 3.222 3.230 3.238 3.136 3.045

-5.0 TC 3.490 3.459 3.428 3.396 3.349 3.307

SC 3.490 3.459 3.428 3.396 3.349 3.307

FROST REGION

6.0 TC 4.250 4.690 5.129 5.569 4.758 4.028

SC 4.250 4.690 5.129 5.569 4.758 4.028

12.0 TC 4.665 4.623 4.581 4.540 4.477 4.421

SC 4.665 4.623 4.581 4.540 4.477 4.421

15.0 TC 4.872 4.829 4.785 4.742 4.676 4.618

SC 4.872 4.829 4.785 4.742 4.676 4.618

18.3 TC 5.100 5.054 5.009 4.964 4.895 4.834

SC 5.100 5.054 5.009 4.964 4.895 4.834

MODEL : RCM 25DR / A4LC 25BR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 3.926 3.909 3.892 3.874 3.793 3.720

SC 3.926 3.909 3.892 3.874 3.793 3.720

-5.0 TC 4.418 4.379 4.339 4.300 4.240 4.187

SC 4.418 4.379 4.339 4.300 4.240 4.187

FROST REGION

6.0 TC 5.771 6.192 6.613 7.034 6.211 5.470

SC 5.771 6.192 6.613 7.034 6.211 5.470

12.0 TC 6.509 6.451 6.393 6.335 6.248 6.169

SC 6.509 6.451 6.393 6.335 6.248 6.169

15.0 TC 6.878 6.817 6.756 6.694 6.602 6.519

SC 6.878 6.817 6.756 6.694 6.602 6.519

18.3 TC 7.284 7.219 7.154 7.089 6.992 6.904

SC 7.284 7.219 7.154 7.089 6.992 6.904

MODEL : RCM 30DR / A4LC 30CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 5.621 5.552 5.483 5.414 5.368 5.326

SC 5.621 5.552 5.483 5.414 5.368 5.326

-5.0 TC 6.576 6.517 6.458 6.399 6.310 6.231

SC 6.576 6.517 6.458 6.399 6.310 6.231

FROST REGION

6.0 TC 9.201 9.163 9.124 9.085 8.893 8.720

SC 9.201 9.163 9.124 9.085 8.893 8.720

12.0 TC 10.633 10.538 10.444 10.349 10.206 10.078

SC 10.633 10.538 10.444 10.349 10.206 10.078

15.0 TC 11.349 11.248 11.147 11.046 10.894 10.757

SC 11.349 11.248 11.147 11.046 10.894 10.757

18.3 TC 12.137 12.029 11.921 11.813 11.650 11.504

SC 12.137 12.029 11.921 11.813 11.650 11.504

MODEL : RCM 40DR / A4LC 40CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 6.456 6.337 6.218 6.099 6.108 6.116

SC 6.456 6.337 6.218 6.099 6.108 6.116

-5.0 TC 7.779 7.709 7.639 7.570 7.465 7.371

SC 7.779 7.709 7.639 7.570 7.465 7.371

FROST REGION

6.0 TC 11.418 11.617 11.817 12.016 11.387 10.822

SC 11.418 11.617 11.817 12.016 11.387 10.822

12.0 TC 13.403 13.284 13.164 13.044 12.865 12.704

SC 13.403 13.284 13.164 13.044 12.865 12.704

15.0 TC 14.396 14.267 14.139 14.011 13.818 13.645

SC 14.396 14.267 14.139 14.011 13.818 13.645

18.3 TC 15.487 15.349 15.211 15.073 14.866 14.680

SC 15.487 15.349 15.211 15.073 14.866 14.680

MODEL : RCM 50DR / A4LC 50CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 8.622 8.538 8.453 8.368 8.263 8.169

SC 8.622 8.538 8.453 8.368 8.263 8.169

-5.0 TC 9.968 9.879 9.789 9.700 9.566 9.445

SC 9.968 9.879 9.789 9.700 9.566 9.445

FROST REGION

6.0 TC 13.669 13.997 14.326 14.654 13.760 12.955

SC 13.669 13.997 14.326 14.654 13.760 12.955

12.0 TC 15.688 15.548 15.408 15.268 15.058 14.869

SC 15.688 15.548 15.408 15.268 15.058 14.869

15.0 TC 16.697 16.548 16.400 16.251 16.027 15.826

SC 16.697 16.548 16.400 16.251 16.027 15.826

18.3 TC 17.808 17.649 17.490 17.332 17.093 16.879

SC 17.808 17.649 17.490 17.332 17.093 16.879

MODEL : RCM 61/62CR / A4LC 61CR (HEATING MODE)

Indoor DB°C

Outdoor WB°C kW 15.0 17.0 19.0 21.0 24.0 26.7

-9.0 TC 9.390 9.251 9.113 8.974 8.933 8.896

SC 9.390 9.251 9.113 8.974 8.933 8.896

-5.0 TC 11.118 11.018 10.918 10.819 10.669 10.535

SC 11.118 11.018 10.918 10.819 10.669 10.535

FROST REGION

6.0 TC 15.870 16.051 16.232 16.413 15.691 15.041

SC 15.870 16.051 16.232 16.413 15.691 15.041

12.0 TC 18.462 18.297 18.132 17.968 17.721 17.498

SC 18.462 18.297 18.132 17.968 17.721 17.498

15.0 TC 19.758 19.582 19.406 19.229 18.965 18.727

SC 19.758 19.582 19.406 19.229 18.965 18.727

18.3 TC 21.183 20.995 20.806 20.617 20.334 20.079

SC 21.183 20.995 20.806 20.617 20.334 20.079

7. OUTLINES AND DIMENSIONS

INDOOR UNIT MODEL: RCM - D SERIES (COOLING ONLY AND HEAT PUMP)

MODEL RCM 20D/DR RCM 25D/DR RCM 30D/DR RCM 40D/DR RCM 50D/DR

1174 1174 1174 1674 1674

75 75 75 75 75

1082 1082 1082 1582 1582

68 68 68 68 68

58 58 93 93 93

156 156 156 156 156

1214 1214 1214 1714 1714

57 57 57 57 57

670 670 670 670 670

216 216 216 216 216

319 319 319 319 319

879 879 879 1379 1379

517 517 517 517 517

All dimensions in mm

MODEL : RCM 61C/CR

MODEL : RCM 62C/CR

CE A(GRILL) B C D E F G H I J K L O T X

62C 1750 40 36 1930 1830 680 352 292 285 140 1880 250 126 132 508

OUTDOOR UNIT MODEL : ALC 20/ 25 B/BR, A4LC 20/ 25 B/BR, ALC 30B/BR

Note : Dimension in mm

MODEL : ALC 30/ 35/ 40/ 50 C/CR, A4LC 30/ 40/ 50 C/CR, A4LC 60C

Caution

Sharp edges and coil surfaces are potential locations which may cause injury hazards. Avoid from being in contact with these places.

MODEL : ALC / A4LC 61 C/CR

8. WIRING DIAGRAMS

COOLING ONLY INDOOR UNIT MODEL : RCM20/25D

OUTDOOR UNIT MODEL : ALC/A4LC 20/25B

INDOOR UNIT MODEL : RCM30D

OUTDOOR UNIT MODEL : ALC 30B

INDOOR UNIT MODEL : RCM30D

OUTDOOR UNIT MODEL : ALC/A4LC 30C

INDOOR UNIT MODEL : RCM40D

OUTDOOR UNIT MODEL : ALC 35C

INDOOR UNIT MODEL : RCM40/ 50D

OUTDOOR UNIT MODEL : ALC/A4LC 40/ 50C

INDOOR UNIT MODEL : RCM61/62C

OUTDOOR UNIT MODEL : A4LC60C

INDOOR UNIT MODEL : RCM61/62C

OUTDOOR UNIT MODEL: ALC/A4LC 61C

HEAT PUMP INDOOR UNIT MODEL : RCM 20/25DR

OUTDOOR UNIT MODEL: ALC/A4LC 20/25BR

INDOOR UNIT MODEL : RCM 30DR

OUTDOOR UNIT MODEL: ALC 30BR

INDOOR UNIT MODEL : RCM 30DR

OUTDOOR UNIT MODEL: ALC/A4LC 30CR

INDOOR UNIT MODEL : RCM 40DR

OUTDOOR UNIT MODEL: ALC 35CR

INDOOR UNIT MODEL : RCM 40/50DR

OUTDOOR UNIT MODEL: ALC/A4LC 40/50CR

INDOOR UNIT MODEL : RCM 61/62CR

OUTDOOR UNIT MODEL: ALC/A4LC 61CR

INDOOR UNIT MODEL : RCM 61/62CR

OUTDOOR UNIT MODEL: ALC/A4LC 60CR

ATTACHMENT 60HZ OUTDOOR UNIT

MODEL : ALC 30C (COOLING ONLY) 60HZ / 1 PHASE / 208 ~230V

MODEL : ALC 40/50C (COOLING ONLY) 60HZ / 3 PHASE / 200 ~230V

MODEL : ALC 40/50CR (COOLING ONLY) 60HZ / 3 PHASE / 200 ~230V

3 PHASE FOR 2 & 3 HP OUTDOOR UNIT

MODEL : ALC/A4LC 20/25B (COOLING ONLY) 3 PHASE / 50 HZ / 380 ~ 415V

MODEL : ALC/A4LC 30C (COOLING ONLY) 3 PHASE / 50 HZ / 380 ~ 415V

MODEL : ALC/A4LC 20/25BR (HEAT PUMP) 3 PHASE / 50HZ / 380 ~ 415V

MODEL : ALC/A4LC 30CR (HEAT PUMP) 3 PHASE / 50HZ / 380 ~ 415V

HIGH AMBIENT UNIT OUTDOOR UNIT MODEL : ALC 20/25B (COOLING ONLY) 50HZ / 1 PHASE / 220 – 240V, 60HZ / 1 PHASE / 208 – 230V

OUTDOOR UNIT MODEL : ALC 30C (COOLING ONLY) 50HZ / 1 PHASE / 220 – 240V, 60HZ / 1 PHASE / 208 – 230V

OUTDOOR UNIT MODEL : ALC 40/50C (COOLING ONLY) 50HZ / 3 PHASE / 380 – 415V, 60HZ / 3 PHASE / 200 – 230V

OUTDOOR UNIT MODEL : ALC 20/25BR (HEAT PUMP) 50HZ / 1 PHASE / 220 – 240V

OUTDOOR UNIT MODEL : ALC 30CR (HEAT PUMP) 50HZ / 1 PHASE / 220 – 240V, 60 HZ / 1 PHASE / 220V

OUTDOOR UNIT MODEL : ALC 40/50CR (HEAT PUMP) 50HZ / 3 PHASE / 380 – 415V, 60HZ / 3 PHASE / 220V

LOW AMBIENT UNIT (OPTIONAL)

OUTDOOR UNIT MODEL : ALC 10B / 15B (50HZ)

OUTDOOR UNIT MODEL : ALC 20B / 25B (50HZ)

LOW AMBIENT UNIT OUTDOOR UNIT MODEL : ALC 10/15BR 50HZ / 1 PHASE / 220 – 240V

OUTDOOR UNIT MODEL : ALC 20BR 50HZ / 1 PHASE / 220 – 240V

OUTDOOR UNIT MODEL : ALC 25BR 50HZ / 1 PHASE / 220 – 240V

SINGLE PHASE FOR 4HP OUDOOT UNIT MODEL : ALC/A4LC 40C (COOLING ONLY)

MODEL : ALC/A4LC 40CR (HEATPUMP)

SPECIAL PRECAUTIONS WHEN DEALING WITH REFRIGERANT R407C UNIT

1) What is new refrigerant R407C?

R407C is a zeotropic refrigerant mixture which has Zero Ozone Depletion Potential (ODP = 0) and thus conformed to the Montreal Protocol regulation. It requires Polyol-ester oil (POE) oil for its compressor's lubricant. Its refrigerant capacity and performance are about the same as the refrigerant R22.

2) Components

Mixture weight composition R32(23%), R125(25%), R134a(52%)

3) Characteristic

• R407C liquid and vapor components have different compositions when the fluid evaporates or condenses. Hence,

when leak occurs and only vapor leaks out, the composition of the refrigerant mixture left in the system will change and subsequently affect the system performance. DO NOT add new refrigerant to leaked system. It is recommended that the system should be evacuated thoroughly before recharging with R407C.

• When refrigerant R407C is used, the composition will differ depending on whether it is in gaseous or liquid phase.

Hence when charging R407C, ensure that only liquid is being withdrawn from the cylinder or can. This is to make certain that only original composition of R407C is being charged into the system.

• POE oil is used as lubricant for R407C compressor, which is different from the mineral oil used for R22 compressor.

Extra precaution must be taken not to expose the R407C system too long to moist air.

4) Check list before installation/servicing

• Tubing

Refrigerant R407C is more easily affected by dust of moisture compared with R22, make sure to temporarily cover the ends of the tubing prior to installation

• Compressor oil

No additional charge of compressor oil is permitted.

• Refrigerant

No other refrigerant other that R407C

• Tools

Tools specifically for R407C only (must not be used for R22 or other refrigerant)

i) Manifold gauge and charging hose ii) Gas leak detector iii) Refrigerant cylinder/charging cylinder iv) Vacuum pump c/w adapter v) Flare tools vi) Refrigerant recovery machine

5) Handling and installation guidelines

Like R22 system, the handling and installation of R407C system are closely similar. All precautionary measures; such as ensuring no moisture, no dirt or chips in the system, clean brazing using nitrogen, and thorough leak check and vacuuming are equally important requirements. However, due to zeotropic nature of R407C and its hydroscopic POE oil, additional precautions must be taken to ensure optimum and trouble-free system operation.

a) Filter-dryer must be installed along the liquid line for all R407C air conditioners. This is to minimise the

contamination of moisture and dirt in the refrigerant system. Filter-dryer must be of molecular sieve type. For a

heat-pump system, install a two-way flow filter dryer along the liquid line.

b) During installation or servicing, avoid prolong exposure of the internal part of the refrigerant system to moist air.

Residual POE oil in the piping and components can absorb moisture from the air.

9. SPECIAL PRECAUTIONS FOR R407C

Ensure that the compressor is not expose to open air for more than the recommended time specified by its

manufacturer (typically less than 10 minutes). Removed the seal-plugs only when the compressor is about to be

brazed.

d) The system should be thoroughly vacuumed to 1.0 Pa (-700mmHg) or lower. This vacuuming level is more

stringent than R22 system so as to ensure no incompressible gas and moisture in the system.

e) When charging R407C, ensure that only liquid is being withdrawn from the cylinder or can. This is to ensure that

only the original composition of R407C is being delivered into the system. The liquid composition can be different

from the vapor composition.

33% / 33% / 34%

23% / 25% / 52%

R32/R125/R134

Composition of R407C in vapour phase

is different from liquid phase.

f) Normally, the R407C cylinder or can is being equipped with a dip-pipe for liquid withdrawal. However, if the dip-pipe

is not available, invert the cylinder or can so as to withdraw liquid from the valve at the bottom.

Liquid withdrawal

Invert cylinder without dip-pipe

Dip-pipe

g) When servicing leak, the top-up method, commonly practiced for R22 system, is not recommended for R407C

system. Unlike R22 where the refrigerant is of a single component, the composition of R407C, which made-up of

three different components, may have changed during the leak. Consequently, a top-up may not ensure that the

R407C in the system is of original composition. This composition shift may adversely affect the system

performance. It is recommended that the system should be evacuated thoroughly before recharging with R407C.

10. INSTALLATION

Sharp edges and coil surfaces are potential injury hazard. Avoid from contact with them.

Caution

(1) INSTALLATION OF OUTDOOR UNIT

PRELIMINARY SITE SURVEY

• Electrical supply and installation is to conform to local authority's (e.g. National Electrical Board) codes and regulations.

• Voltage supply fluctuation must not exceed ± 10% of rated voltage. Electricity supply lines must be independent of welding transformer which can cause high supply fluctuations.

• Ensure that the location is convenient for wiring, piping and drainage

STANDARD MOUNTING

Ensure that the overhead supports are strong enough to hold the weight of the unit. Position the hanger rods (wall mounting bracket for floor standing), and check for its alignment with the unit as shown in Figure A. Also, check that the hangers are secured and the base of the fan coil unit is leveled in both horizontal directions, taking into account the gradient for drainage flow as recommended in Figure B.

Model RCM20D/DR RCM25D/DR RCM30D/DR RCM40D/DR RCM50D/DR

A 1214 1214 1214 1714 1714 B 666 666 666 666 666 C 273 273 273 273 273 D 130 130 130 130 130 E 1136 1136 1136 1636 1636 F 39 39 39 39 39

RCM 61C/CR

Figure A

RCM-D RCM61C

Figure B

Please ensure that the following steps are taken :

• Check the gradient for drainage flow as recommended in Figure B.

• Provide clearance for easy servicing and optimal air flow as shown in Figure C.

• The indoor unit must be installed such that there is no short circuit of the cool discharge air with the

warm return air.

• Do not install the indoor unit where there is direct sunlight shining on the unit. The location should be suitable for piping and drainage installation. The unit must be a large distance away from the door.

SEMI-ENCLOSED MOUNTING

• In case the unit is to be half recessed into false ceiling, please check the unit is well align.

RCM-D

Figure C

RCM 61/62C

Figure C

• Provide the installation space as shown in Figure D.

RCM-D RCM 61/62C

Figure D

INSTALLATION - CEILING EXPOSED TYPE

STEP 1 Remove air intake grille, side panel, side close-up and hanger bracket from the unit; see Fig E

AIR INTAKE GRILLE

SIDE FRAME

HANGER BRACKET

SIDE CLOSE UP

Figure E

STEP 2 Position the hanger rods as per Fig B and install the hanger bracket; see Fig F.

Figure F STEP 3 Hanger up the unit and tighten the bolt, after completed the piping and drain pipe; install back the grille and panel Fig. G.

Figure G

INSTALLATION - FLOOR STANDING TYPE (OPTIONAL SPECIFICATION)

STEP 1

Remove air intake grille, side panel, side close-up and side panel from the unit; see Fig E.

STEP 2

Position the floor support (field supply) as per Fig B. install the unit; see Fig I.

Wall

Fig I

STEP 3

Two types of piping and drain pipe connection as Fig J.

PIPING AND DRAIN PIPE INSTALLATION

FROM BACK PANEL

PIPING & DRAIN PIPE

WALL

FROM TOP PANEL

PIPING & DRAIN PIPE

Fig J

(2) INSTALLATION OF OUTDOOR UNIT

As condensing temperature rises, evaporating temperature rises and cooling capacity drops. In order to achieve maximum cooling capacity, the location selected for outdoor unit should fulfill the following requirements:

• Install the condensing (outdoor) unit in away such that hot air distributed by the outdoor condensing

unit cannot be drawn in again (as in the case of short circuit of hot discharge air). Allow sufficient space for maintenance around the unit.

• Ensure that there is no obstruction of air flow into or out of the unit. Remove obstacles which block air intake or discharge.

• The location must be well ventilated, so that the unit can draw in and distribute plenty of air thus lowering the condensing temperature.

• A place capable of bearing the weight of the outdoor unit and isolating noise and v bration.

• A place protected from direct sunlight. Otherwise use an awning for protection, if necessary.

• The location must not be suscept ble to dust or oil mist.

INSTALLATION CLEARANCE

• Outdoor units must be installed such that there is no short circuit of the hot discharge air or obstruction to smooth air flow. Select the coolest possible place where intake air should not be hotter than the outside temperature (max. 45 C)

Minimum distance A B C D

ALC/A4LC20/25B/BR, ALC30B/BR 150mm 1000mm 150mm 500mm

ALC/A4LC30/40/50C/CR, ALC35C/CR 300mm 1000mm 300mm 500mm

ALC/A4LC60/61/62C/CR 300mm 1200mm 500mm 500mm

(3) REFRIGERANT PIPING

MAXIMUM PIPE LENGTH AND MAXIMUM NUMBER OF BENDS

• When the pipe length becomes too long, both the capacity and reliability drop. As the number of bends increases, system piping resistance to the refrigerant flow increases, thus lowering the cooling capacity, and as the result the

font compressor may become defective. Always choose the shortest path and follow the recommendation as tabulated below:

MODEL

DATA

20 25/30B 30C 35/40 50 60/61/62

Max. Length, L 15m 15m 35m 35m 35m 35m Max. Elevation, H 8m 8m 15m 15m 15m 20m Max. No. of bends 10 10 10 10 10 10

PIPING SIZES (FLARE CONNECTION TYPE)

Piping sizes are as follows:

MODEL 20 25/30B 30C 35/40 50 60/61/62

Liquid (mm/in) 6.35(1/4) 9.52(3/8) 9.52(3/8) 9.52(3/8) 9.52(3/8) 12.7(1/2) Suction (mm/in) 15.88(5/8) 15.88 (5/8) 15.88 (5/8) 19.05 (3/4) 19.05 (3/4) 19.05(3/4)

PIPING CONNECTION TO THE UNITS

• Align the center of the piping and sufficiently tighten the flare nut with fingers.

• Finally, tighten the flare nut with torque wrench until the wrench clicks.

• When tightening the flare nut with torque wrench, ensure the direction for tightening follows the arrow on the wrench.

PIPE SIZE (mm/in) TORQUE (Nm)

6.35(1/4) 18

9.53(3/8) 42

12.7(1/2) 55

15.88(5/8) 65

19.05(3/4) 78

(4) WIRING

ELECTRICAL CONNECTIONS

•

Wiring regulations on wire diameters differ from country to country. Please refer to your LOCAL ELECTRICAL CODES

for field wiring rules. Be sure that installation comply with such rules and regulations.

GENERAL PRECAUTIONS

• Ensure that the rated voltage of the unit corresponds to the name plate before carrying out proper wiring according to the wiring diagram.

• Provide a power outlet to be used exclusively for each unit. A power supply disconnect and a circuit breaker for over-current protection should be provided in the exclusive line.

• The unit must be GROUNDED to prevent possible hazards due to insulation failures.

• All wiring must be firmly connected.

• All wiring must not touch the hot refrigerant piping, compressor or any moving parts of fan motors.

(5) VACUUMING AND CHARGING

• The precharged outdoor unit does not need any vacuuming or charging. However once it is connected, the connecting pipe line and the indoor need to be vacuumed before releasing the R22/R407C from the outdoor unit.

1) Open the service port core cap.

2) Connect pressure gauge to the service port.

3) Connect the line to vacuum pump. Open the charging manifold valve and turn the pump on. Vacuum

to –0.1 MPa (-760mmHg) or lower. (Evacuation time varies by the pump but averagely in 1 hour).

CAUTION FOR R407C

R407C must be charged as liquid. Usually R407C cylinder is equipped with a dip-pipe for liquid withdrawal. If there is no dip-pipe, the cylinder should be inverted so as to withdraw liquid R407C from the valve.

CAUTION FOR R407C

Do not top-up when servicing leak, as this will reduce the unit performance. Vacuum the unit thoroughly and then charge the unit with fresh R407C according to the amount recommended in the specification.

(6) ADDITIONAL CHARGE

• The refrigerant gas has already charged into the outdoor unit. For the piping length of 5m. Additional refrigerant charge after vacuuming is not necessary.

• When the piping length is more than 5m, please use the table below (unit in gram).

MODEL 7m 10m 15m 20m 35m

20D/20DR 30/50 75/125 150/250 225/375 25D/25DR 76/100 190/250 380/500 570/750 30D/30DR 100 250 500 750 1500 40D/40DR 100 250 500 750 1500 50D/50DR 100 250 500 750 1500

61C/CR 220 550 1100 1650 3300

Diagram shows typical charging method.

(7) OVERALL CHECKING

•

Ensure the following, in particular :

1) The unit is mounted solidly and rigid in position.

2) Piping and connections are leak proof after charging.

3) Proper wiring has been done.

Drainage check - pour some water into drain pan. Test run

1) Conduct a test run after water drainage test and gas leakage test.

2) Watch out for the following :

a) Is the electric plug firmly inserted into the socket? b) Is there any abnormal sound from unit? c) Is there any abnormal vibration with regard to unit itself or piping? d) Is there smooth drainage of water?

Check that :

1) Outdoor fan is running, with warm air blowing off the outdoor unit (cooling cycle).

2) Indoor blower is running and discharge cool air (cooling cycle).

3) Suction (low side) pressure is as per recommendations.

4) The remote controller has incorporated a 3 minutes delay in the circuit. Thus, it requires about 3 minutes before

the outdoor unit can start up.

CAUTION FOR R407C

Avoid prolong exposure of an opened compressor, or the internal part of refrigerant piping to moist air. The POE oil in the compressor and piping can absorb moisture

from air.

(8) STANDARD OPERATING CONDITION

Cooling Only Unit

Temperature

Ts °C Th °C

minimum indoor temperature

19.4 13.9

maximum indoor temperature

26.7 19.4

minimum outdoor temperature

19.4 13.9

maximum- outdoor temperature

46.0 24.0

Heat Pump Unit

Temperature

Ts °C Th °C

minimum indoor temperature

15.0 -

maximum indoor temperature

26.7 -

minimum outdoor temperature

-8.0 -9.0

maximum- outdoor temperature

24 18

Ts : Dry bulb temperature Th : Wet bulb temperature

(9) OPERATING STATE AND FAULT TABLE

Wireless Remote Control - Handset

Cooling: LED Indicator Light Display Heatpump : LED Indicator Light Display

COOL DRY FAN COOL DRY FAN HEAT

Self Diagnosis Table

COOL

DRY

FAN

HEAT

Operation/ Faulty Indicator



Cooling mode



Dry mode



Fan mode



Heat mode



Auto mode in heating operation



Auto mode in heating operation

Defrost operation

Compressor overload protection

Outdoor coil sensor contact loose/short Room air sensor contact loose/short

 ON  / z ON or OFF BLINKING

Wired Remote Control – SLM

Cooling / Heatpump Model

Error Code at 7 Segment Display Operation/ Faulty Indication

E1 Blinking Room Sensor Contact Loose / Short

E2 Blinking Indoor Coil Sensor Contact Loose / Short

E3 Blinking Outdoor Coil Sensor Contact Loose / Short

E4 Blinking Compressor Overload

E5 Blinking Gas Leak

E6 Blinking Pump Faulty

Heat LED Blinking Outdoor Defrost (For Heat Pump Only)

G6 REMOTE CONTROLLER

AUTOMATIC AIR SWING

• Press the button to

activate the automatic air swing function. The swing angle ranging from horizontal to 25 to bottom.

FAN SPEED AND VENTILATION MODE SELECTION

Press the button until the desired fan speed is achieved.

OPERATION MODES

• Press the “mode” button for select the type of operating mode.

• Cooling only unit: Cool →Dry →Fan.

eatpump unit :

uto →Cool →Dry

• H A →Fan →Heat

SIGNAL TRANSMISSION INDICATION

• Blink to confirm the last setting has been send to the unit.

TEMPERATURE SETTING

• Set the desire room temperature.

• Press button to increase or decrease the set temperature. Setting range are between 16 C to 30 C setting (60 F to 80 F)(Optional setting from 20 C to 30 C).

• Press  or  button simultaneously will toggle the temperature setting between C and

11. REMOTE CONTROL OPERATION GUIDE

TIMER SETTING

• Press set button to activate the timer setting (from 1 hour to 15 hour) of the air conditioning unit. It will be in "On" or "Off" condition after the set time depending to the current condition (either from "On" to Off" or vise versa)

• To cancel the timer setting, press the button continuously until the timer display goes off.

SLEEP MODE

• Press the button to activate sleep mode. This mode can only be activated while in cooling or heating mode operation. If it is activated in “COOL” mode, the set temperature will be increase

0.5 C after 30 minutes, 1 C after 1 hour and 2 C after 2 hours. Whereas in “HEAT” mode, the set temperature will decrease by 1 C after 30mins, 2 C after 1 hour and 3 C after 2 hours.

• This function is available under COOL, HEAT & AUTO mode.

ON / OFF switch

• Press to start the air conditioner unit.

• Press again to stop the

unit.

COOL

DRY

HEATMED

HIGH

AUTO

MODE

TEMP

SENSOR

ON/OFF

SLEEP

LOW

TIMER

82593

FAN

FAN ON/OFF

TEMP

SLEEP

TIMER MODE

345

610

SWING

FAN

SLM AC-5300 (OPTIONAL)

1. “ON/OFF” switch

• Press to start the air conditioner unit.

• Press again to stop the unit.

2. Temperature setting

• Set the desired room temperature.

• Press button to increase or decrease the

set temperature. Setting range are between 16

C to 30oC (60oF to 80oF).

3. Operation Modes

• Press the “mode” button for select the type of operating mode.

- Cooling Only : COOL, DRY, FAN

- Heat Pump : AUTO, COOL, DRY, HEAT, FAN (AUTO mode is represented by both

COOL and HEAT LED light on)

4. Fan Speed selection.

• Press the button until the desired fan speed is achieved.

5. Timer.

• Press the set button to select the switch timer of the air conditioner unit (the setting range is between 1 to 10 hours).

6. “Sleep” mode

• Press button to activate the sleep function. This function can only be activated under “cool” or heating mode operation. When it is activated under “cool” mode operation, the set temperature will increase 0.5

C after 30

minutes, 1

C after 1 hour and 2oC after 2 hours. If it is activated under “HEAT” mode operation, the set temperature will be decreased 0.5° C after 30 minutes, 1° C after 1 hour and 2° C after 2 hours.

7. Air Swing

• Press button to activate the automatic air swing function.

8. Sensor

• Infra red sensor to receive signals from wireless controller.

9. LED display

• To display the set temperature (in º C) and

timer delay setting (in hours).

10. Transmission source

• To transmit signals to the air conditioner.

G8 REMOTE CONTROLLER

1. Transmission source

• The source where the signal will be transmitted.

2. Signal Transmission indication

• Blink to confirm the last setting has been send to the unit.

3. On/Off Button

• Press once to start the air conditioner.

• Press again to stop the unit.

4. Temperature setting

• To set the desired room temperature, press the button to increase or decrease the set temperature.

• The temperature setting range is from 16°C to 30°C (Optional setting 18°C to 30°C).

• Press both buttons simultaneously to toggle the temperature setting between °C and °F.

5. Operation mode

• Press the MODE button to select the type of operating mode.

• For cooling only unit, the available modes are : COOL, DRY & FAN.

• For heat pump unit, the available modes are : AUTO, COOL, DRY, FAN & HEAT.

6. Fan speed selection

• Press the button until the desired fan speed is achieved.

7. ON timer setting

• Press the SET button will activate the on timer function.

• Set the desired on time by pressing the SET button continuously. If the timer is set to 7.30am, the air conditioner will turn on at 7.30am sharp.

• Press the CLR button to cancel the on timer setting.

8. OFF timer setting

• Press the SET button will activate the off timer function.

• Set the desired off time by pressing the SET button continuously.

• Press the CLR button to cancel the off timer setting.

9. Automatic air swing

• Press the SWING button to activate the automatic air swing function.

• To distribute the air to a specific direction, press the SWING button and wait until the louver move to the desired direction and press the button once again.

10. Sleep mode setting

• Press the button to activate sleep mode. This function is available under COOL, HEAT & AUTO mode.

• When it is activated in COOL mode, the set temperature will be increased 0.5°C after 30mins, 1°C after 1 hour and 2°C after 2 hours.

• When it is activated in HEAT mode, the set temperature will be decreased 1°C after 30mins, 2°C after 1 hour and 3°C after 2 hours.

11. Clock time setting

• Press button + or – to increase or decrease the clock time.

12. Turbo function (optional – only applicable to

inverter unit)

• Press button for fast cooling or heating operation.

• The temperature will be increased internally if it is

in the HEAT mode, decreased if in COOL or DRY mode. Fan speed will be increased if it is not at maximum speed.

• The temperature & fan speed will resume to user setting if the button is pressed again or after 20mins.

• Available under HEAT, COOL & DRY modes only.

Warning: Disconnect from main supply before servicing the air conditioner.

The unit is designed to give long life operation with minimum maintenance required. However, it should be regularly checked and the following items should be given due attention.

Components Maintenance Procedure Recommended Schedule

Air filter

(Indoor Unit)

1. Remove the ionizer filter before cleaning the filter.

2. Remove the dust adhering on the filter by using a vacuum cleaner or wash using water less than 40°C with a neutral cleaning detergent.

3. Rinse and dry it before fitting back the ionizer filter and set it back to unit.

4. Note : Never use petrol, thinner, benzene or any other chemicals.

At least once a month.

Indoor unit 1. Clean away dirt or dust on grille or panel by wiping

with a soft cloth soaked in lukewarm (or cool) water or neutral detergent solution.

2. Note : Never use petrol, thinner, benzene or other volatile chemicals, which may cause plastic surface to deform.

At least once a month.

Condense Drain

Pan & Pipe

1. Check the cleanliness and clean it if necessary.

2. Check the condensate water flow

Every 3 months.

Indoor Fan Check if there is any abnormal noise. If necessary

Indoor/Outdoor

Coil

1. Check and remove the dirt between the fins.

2. Check and remove any obstacles which hinder air flow through the indoor or outdoor.

Every month.

Power Supply 1. Check the running current and voltage for indoor and

outdoor unit.

2. Check the electrical wiring and tighten the wire onto the terminal block if necessary.

Every 2 months Every year

Compressor No maintenance needed if refrigerant circuit remains

sealed. However, check for refrigerant leak at joint and fitting.

Every 6 months.

Compressor

Oil

Oil is factory charged. Not necessary to add oil if

circuit remains sealed.

No maintenance required.

Fan Motor

Oil

All motors are pre-lubricated and sealed at factory.

No maintenance required.

12. SERVICE AND MAINTENANCE

The design of the ALC outdoor series allows servicing to be carried out readily and easily. The removal of the top side, front and back panel make almost every part accessible.

Under normal circumstances, these outdoor units only require a check and cleaning of air intake coil surface once quarterly. However, if a unit is installed in areas subjected to much oil mist and dust, the coils must be regularly cleaned by qualified Air Conditioner Service Technicians to ensure sufficient heat exchange and proper operation. Otherwise, the systems life span may be shortened.

CAUTION!

Do not charge OXYGEN, ACETYLENE OR OTHER FLAMMABLE and poisonous gases into the unit when performing a leakage test or an airtight test. These gases could cause severe explosion and damage if exposed to high temperature and pressure. It is recommended that only nitrogen or refrigerant be charged when performing the leakage or airtight test.

When any air-conditioner malfunction is noted, immediately switch off the power supply to the unit, and contact the local dealer, if necessary. Some simple troubleshooting tips are given below :

FAULT CAUSE

1. Fan does not work 3 minutes after starting

• Protection against the frequent starting. Wait 3 or 4 minutes.

2. The air conditioning unit does not work

•

Power failure or you must be replaced the fuse.

The power plug is disconnected.

Possibility of making a programming error in the controller.

If the fault persist after these verifications, contact your installer.

3. The air conditioning unit does not blow sufficiently

•

The air filter is dirty.

The doors or windows are open.

The air entrance and exit are clogged.

The regulate temperature is not high enough.

4. The remote control light is deficient

•

The batteries are discharge.

The batteries are not correctly inserted.

The assembly is not good.

5. Air discharge flow has a bad odor

•

This odor can be caused by cigarette smoke particles, perfume, sweat, which stick to the coil.

Check if there is any moisture on the walls, garment, other.

Check the drain pan.

6. Condensation on the air grille of indoor unit

• • This is due to air humidity after a long time of operation.

The unit has a lower temperature point, increase the point and operate at high speed.

7. The water flow of air conditioning unit

• Check the condensate evacuation.

8. The air conditioning unit is noisy

• “Air flow noise” : refrigerant fluid admission in evaporator.

13. TROUBLESHOOTING

FOR COOLING ONLY MODELS OR HEAT PUMP MODELS (COOLING CYCLE)

DIAGNOSIS BY FLOW CHART

The following chart are efficient checking procedures for troubleshooting when these fan-coil units are coupled with the condensing units using standard wiring. For dual circuited models, perform the procedures for each circuit.

No Cooling

No Cooling ( Compresor Does Not Start )

No Voltage or Low Voltage

Unit Power

Supply

Evaporator

Fan Motor

Fuse For

Operation

Circuit

Single-Phase

Components Shorted

Connections Loose

Overcurrent

Relay For

Evaporator Fan

High Voltage or Low Voltage

Single-Phase

Evaporator Fan

Motor Contactor

Coil Burned

Contact Faulty

Get the Right Voltage

Repair the Power Line

Repair or Replace The Components

Tighten The Connections

Get The Right Voltage

Check The Power Supply To The

Motor : Repair When Necessary

Faulty Fan Motor

Defective Operation Switch

Change The Contactor

Repair The Contacts

Repair Or Change The Motor

Repair Or Change The Switch

Condenser

Fan Motor

Overcurrent

Relay For

Condenser Fan

Contactor

Compressor

Contactor

High Voltage or Low Voltage

Single-Phase

Coil Burnt

Contact Faulty

Fan Motor Faulty

Other Electrical Component Faulty

Coil Burnt

Contact Faulty

Open Compressor Windings

Incorrect Wiring

Get The Right Voltage

Change The Contactor

Change The Contacts

Repair or Change The Motor

Repair or Change If Necessary

Change The Contactor

Repair The Contacts

Change The Compressor

Correct The Wiring

Running

Stop

Tripped

Faulty

Tripped

Blown

Running

Faulty

Stop

: Faulty

: Check : Cause Remedy

Check The Power Supply To The

Motor : Repair When Necessary

INSUFFICIENT COOLING

Insufficient Cooling

High Discharge Pressure or Low Suction Pressure

Dual Pressure

Switch

Compressor

Cycling

Overcurrent

Relay For

Compressor

Clogged Capillary or Pressure Switch

Switch Faulty

High Voltage or Low Voltage

Discharge Gas

Thermostat or

Internal

Thermostat

Single-Phase

High Discharge Pressure And High Suction Pressure

High Discharge Pressure And Low Suction Pressure

Refrigerant Short Charge or Refrigerant Leakage

See "High Discharge Pressure" or

"Low Suction Pressure"

Repair Clogging and Replace

The Switch If Required

Repair or Change If Necessary

Get The Right Voltage

Check The Power Line To The

Compressor : Repair When Necessary

High Suction Pressure

High Discharge Pressure or Low Suction Pressure

See "High Suction Pressure"

Running

Tripping

Cycling On

Tripping

Loose Connections

See "High Discharge Pressure"

or "High Suction Pressure"

Tighten The Connections

See "High Discharge Pressure"

or "Low Suction Pressure"

Add Refrigerant. Repair

Leakage If Detected.

See "High Discharge Pressure"

or "Low Suction Pressure"

HIGH DISCHARGE PRESSURE

High Discharge

Pressure

Clogged Condenser Coil

Condenser

Air Inlet

Temperature

Condenser

Air Flow

Low Fan Speed

Malfunction Of Fan Cycling System

Circulating Air Flow

Overcharged Refrigerant

Non-Condensable Gas

High Suction Pressure

Clean The Condenser

Check The Voltage And Get

The Right Voltage

Check The System And

Repair If Required

Secure Space For Required Air Flow

Purge The Refrigerant

Restricted

High

Restricted Liquid Line

Purge The Gas

Remove The Restriction

See "High Suction Pressure"

LOW DISCHARGE PRESSURE

Low Discharge

Pressure

Malfunction Of Fan Cycling System

Condenser

Air Flow

Low Refrigerant Charge

Low Ambient Temperature

Check The System And Repair The

Components If Required

Add Refrigerant

See The Unit Working Range

Excessive

HIGH SUCTION PRESSURE

High Suction

Pressure

Excessive Fresh Air Intake

Evaporator

Air Inlet

Temp.

Insufficient Duct Insulation

Defective Compressor Valve

Reduce The Fresh Air Intake

Reinforce The Duct Insula ion

Change Or Repair The

Compressor

Low

Overcharged Refrigerant Purge The Refrigerant

LOW SUCTION PRESSURE

Low Suction Pressure

Clogged Air Filter

Evaporator

Air Inlet

Temp.

Evaporator

Air Flow

Restricted Duct

Low Fan Speed

Short Cycling

Faulty Thermostat

Restricted Liquid LIne And Suc ion Line

Low Discharge Pressure

Clean The Air Filter

Remove The

Restriction

Adjust The Fan Speed

Remove Obstacles To Air Circulation

Repair Or Replace If Necessary

Restricted

Low

Low Refrigerant Charge Add Refrigerant

See "Low Discharge

Pressure"

Remove The Restriction

NOISY OPERATION

Noisy Operation

Unremoved Shipping Bolt(s)

Evaporator

Fan

Compressor

Overcharged Refrigerant

Low Suction Pressure

Worn Compressor Parts

Knocking Runner

Worn Bearing

Refrigerant Short Charge

Remove The Bolt(s)

Purge The Refrigerant

See "Low Suction Pressure"

Replace Or Repair The Compressor

Fix The Runner Or Casing Properly

Noisy

Partially Clogged Clean The Dryer

Add Refrigerant

Change The Bearing

Liquid Line

Shipping

Bolt(s)

Liquid Refrigerant Backing Up

Noisy

Inadequate Duct Work

Loose Fixed Screws Tighten All Fixed Screws

Check Flexible Ducts

Noisy

Strainer

Whis ling

FOR HEAT PUMP MODELS

By means of pressure readings :

PRESSURE PROBABLE CAUSE

Data

Circuit

Too

Low

A Little

Low

Normal

A Little

High

Too

High

High Side Low Side

1. Overcharged with refrigerant.

2. Non-condensable gases in refrigerant circuit (e.g. oil).

3. Obstructed air-intake/discharge.

4. Short circuiting of hot air at outdoor unit.

High Side Low Side

1. Poor compression/no compression (compressor defective.)

2. Check valve stick in open position.

3. Reversing valve leaking.

High Side Low Side

1. Undercharged with refrigerant.

2. Refrigerant leakage.

3. Air filter clogged/dirty (indoor unit).

4. Indoor fan locked (Cooling).

5. Defective defrost control, outdoor coil freeze up (heating).

6. Outdoor fan locked (heating).

High Side Low Side

1. Outdoor fan blocked (cooling).

2. Outdoor coil dirty (cooling).

3. Indoor fan locked (heating).

4. Indoor filter clogged/dirty (heating).

5. Non-condensable gases in refrigerant circuit (e.g. air)

High Side Low Side

1. Air intake temperature of indoor unit too high.

BY MEANS OF DIAGNOSIS FLOW CHART

Generally, there are two kind of problems, i.e. starting failure and insufficient cooling/heating. "Starting Failure" is caused by electrical defect while "Insufficient Cooling/Heating" is caused by improper application or defects in refrigerant circuit

No Cooling / Heating

Unit fail to start

Check power supply

- voltage

- phase

- frequency

Check settings of remote control box

Compressor fails to start

Check circuit breaker & fuse

Check power source cord

Fan fails to start

Fan Motor Capacitor defective

Loose Connections, Contactors

Irregular motor resistance (Ω) & insulation (M Ω)

Replace Fan Motor

Compressor Motor damaged ( to replace compressor)

Thermostat setting too high

Protection Device Actuated

Reset

Compressor locked (to replace compressor)

Voltage supply not within range

Check motor resistance (Ω ) and insulation (M Ω)

Compressor Capacitor Defective

Loose Connections, Improper wiring

Regular but fails to start

Irregular

i) DIAGNOSIS OF ELECTRIC CIRCUIT

The most common causes of air conditioner failure to “start" are: a) Voltage not within ±10% of rated voltage. b) Power supply interrupted. c) Control settings improper. d) Air conditioner is disconnected from main power source. e) Fuse blown or circuit breaker off.

ii) DIAGNOSIS OF REFRIGERANT CIRCUIT / APPLICATION

There might be some cases where the unit starts running but does not perform satisfactory, i.e. insufficient cooling. Judgement could be made by measuring temperature difference of indoor unit's intake and discharge air as well as running current.

Insufficient Cooling

Unit Starts

Excessive heat source e.g. electric kettle

High cool load

Refrigerant circuit

Leakage

Restriction e.g. at strainer, capillary, filter dryer, etc.

Compressor

Less or no compression (Low running current)

Room overcrowded with people

Windows / doors wide open

Check air circulation

Indoor/Outdoor coil dirty (clogged)

Air filters dirty

Fan Malfunction

Obstruction at air inlet/outlet of indoor/outdoor unit

Satisfactory operation with temperature difference of air intake & discharge of indoor unit 8°C - 13°C

Insufficient Heating

Unit Starts

High heat load

Refrigerant circuit

Leakage

Restriction e.g. at strainer, capillary, filter dryer, etc.

Compressor

Less or no compression (Low running current)

Windows / doors wide open

Check air circulation

Indoor/Outdoor coil dirty (clogged)

Air filters dirty

Fan Malfunction

Obstruction at air inlet/outlet of indoor/outdoor unit

Satisfactory operation with temperature difference of air intake & discharge of indoor unit 14°C - 20°C

MODEL : RCM 20/25 D/DR

NO. PARTS DESCRIPTION NO. PARTS DESCRIPTION

1 TOP PANEL 16 COIL ASSY 2 HANGER BRACKET - LEFT 17 SIDE FRAME ASSY – RIGHT 3 CONTROL BOX 18 CLOSE UP, SIDE RIGHT 4 CLOSE UP, SIDE PANEL 19 COIL HOLDER ASSY - RIGHT 5 SIDE FRAME ASSY - LEFT 20 BACK PANEL 6 COIL HOLDER ASSY - LEFT 21 HANGER BRACKET – RIGHT 7 FAN DECK 22 FAN MOTOR 8 AIR INTAKE GRILLE ASSY 23a BLOWER HOUSING, TOP

9 FRONT FRAME – LEFT 23b BLOWER HOUSING, BOTTOM 10 LOUVER ASSY 23c BLOWER WHEEL 11 FRONT FRAME – RIGHT 24 DRAIN HOSE ASSY 12 AIR SWIND MOTOR ASSY 25 LCD HANDSET 13 BOTTOM PANEL 26 PCB 14 DRAIN PAN ASSY 15 CENTRE SUPPORT BRACKET

27 AIR INTAKE GRILLE FRAME HOLDER

ASSY

14. PARTS LIST

MODEL : RCM 30 D/DR

NO. PART DESCRIPTION NO. PART DESCRIPTION

1 BRACKET HANGER, LEFT 17 GRILLE, AIR INTAKE

2 TERMINAL BOX COVER 18 ASSY, FILTER FRAME LEFT/RIGHT

3 PCB 19 BRACKET CENTRE SUPPORT

4 CLOSE UP, LEFT 20 THERMISTER

5 FRAME, SIDE LEFT 21 FRAME, SIDE RIGHT

6 ASSY, COIL HOLDER LEFT 22 CLOSE UP, RIGHT

7 FAN DECK 23 ASSY, COIL HOLDER RIGHT

8 COIL ASSY 24 BACK PANEL

9 FRAME, FRONT LEFT 25 BRACKET HANGER, RIGHT

10 ASSY, LOUVER BOTTOM 26 TOP PANEL

11 FRAME, FRONT RIGHT 27 FAN MOTOR

12 AIR SWING MOTOR ASSY 28 BLOWER WHEEL

13 AIR INTAKE GRILLE FRAME HOLDER

ASSY

29 HOUSING BLOWER, BOTTOM

14 BOTTOM PANEL 30 HOUSING BLOWER, TOP

15 DRAIN PAN ASSY 31 LCD HANDSET

16 DRAIN HOSE ASSY 32 RUBBER COUPLING

MODEL : RCM 40/50 D/DR

NO. PART DESCRIPTION NO. PART DESCRIPTION

1 BRACKET HANGER, LEFT 19 DRAIN PAN ASSY

2 TERMINAL BOX COVER 20 DRAIN HOSE ASSY

3 PCB 21 AIR INTAKE GRILLE ASSY

4 CLOSE UP, LEFT 22 AIR INTAKE GRILLE ASSY

5 FRAME, SIDE LEFT 23 BACKET, CENTER SUPPORT

6 ASSY, COIL HOLDER LEFT 24 FRAME, SIDE RIGHT

7 FAN DECK 25 CLOSE UP, RIGHT

8 COIL ASSY 26 ASSY, COIL HOLDER RIGHT

9 FRAME, FRONT LEFT 27 BACK PANEL

10 FRONT BOTTOM CENTER 28 BRACKET HANGER , RIGHT

11 FRONT TOP CENTER 29 TOP PANEL

12 AIR INTAKE GRILLE CENTER ASSY 30 FAN MOTOR

13 AIR INTAKE GRILLE CENTER ASSY 31 BLOWER WHEEL

14 FRAME, FRONT RIGHT 32 HOUSING BLOWER, TOP

15 ASSY LOUVER BOTTOM 33 HOUSING BLOWER, BOTTOM

16 AIR SWING MOTOR ASSY 34 LCD HANDSET

AIR INTAKE GRILLE FRAME HOLDER ASSY

35 RUBBER COUPLING

18 BOTTOM PANEL 36 THERMISTER

MODEL : RCM 61 /62 C/CR

NO. PART DESCRIPTION NO. PART DESCRIPTION

1 TOP BACK PANEL 13 DRAIN PAN

2 COIL HOLDER LEFT 14 BOTTOM PANEL

3 COIL ASSY 15 TERMINAL BOX

4 FAN DECK 16 FRONT FRAME (PLAIN)

5 MOTOR 17 FRONT FRAME (WITH LED INDICATORS)

6 BLOWER HOUSING & WHEEL 18 SIDE PANEL

7 RUBBER COUPLING 19 HOOK 4 x 14 mm

8 BRACKET, FAN DECK 20 LCD HANDSET

9 COIL HOLDER RIGHT 21 AIR INTAKE GRILLE C/W FILTER

10 BRACKET LEFT, HANGER W/PAINT 22 AIR INTAKE GRILLE C/W FILTER

11 BOLT, DOME HEAD HEX. 23 PCB

12 BRACKET RIGHT, HANGER W/PAINT

MODEL : ALC/A4LC20/25 B/BR

ALC30 B/BR

NO PART DESCRIPTION NO. PART DESCRIPTION

1 BACK PANEL 15 NUT

2 TOP PANEL 16 BASE PAN

3 COIL ASSY 17 CAPILLARY TUBE

4 MOTOR MOUNTING BRACKET 18 PARTITION

5 FAN MOTOR 19 TERMINAL BOX PANEL

6 RING WASHER 20 SIDE PANEL

7 FAN BLADE 21 ACCESS PANEL

8 SQUARE WASHER 22 PLATE, FLARE VALVE

9 HEX NUT 23 FLARE VALVE

10 BLACK LABEL 24 FLARE VALVE

11 FRONT PANEL 25 COMPRESSOR CAPACITOR

12 COMPRESSOR 26 OUTDOOR THERMISTER (COPPER)

13 RUBBER GROMMET 27 THERMISTER CLIP

14 WASHER

MODEL : ALC/A4LC 30/40/50/61 C/CR, A4LC 60C

ALC35 C/CR

NO PART DESCRIPTION NO. PART DESCRIPTION

1 BASE PAN 11 MOTOR BRACKET ASSY

2 FLARE VALVE 12 SIDE PANEL LEFT

3 FLARE VALVE 13 FAN MOTOR

4 PARTITION 14 FAN BLADE

5 COMPRESSOR 15 FRONT PANEL ASSY

6 ACCESS PANEL 16 TERMINAL BOX ASSY

7 ACCUMULATOR 17 PLATE, FLARE VALVE

8 BACK PANEL

9 TOP PANEL

10 COIL ASSY

DOP:

While upmost care is taken in ensuring that all details in the publication are correct at ime of going to press, we are constantly striving for improvement and therefore reserve he rights to alter model specifications and equipment without prior notice. Details of specifica ions and

equipment are also subject to change to suit local conditions and equirements and not all models are available in every market.

Acson RCM 20 D, RCM 25 D, RCM 30 D, RCM 40 D, RCM 50 D user guide manual

Specifications and Main Features

Frequently Asked Questions

User Manual