Page 1
Model:
AMSD-A/AR
AMST-A/AR
AMSH-A
A4MSD-A/AR
A4MST-A/AR
MSDMSD
AMS-2005
MSTMST
MST
MSHMSH
MSH
Multi-Split Systems
REGISTERED
ISO 9002
Page 2
1. GENERAL INFORMATION ......................................................................................... 2
CONTENTS
2. FEATURE ....................................................................................................................2
3. COUPLING VERSATILITY ..........................................................................................3
4. SPECIFICATIONS .....................................................................................................11
5. OUTLINES AND DIMENSIONS .................................................................................35
6. WIRING DIAGRAMS ..................................................................................................42
7. REFRIGERANT CIRCUIT DIAGRAM ........................................................................ 51
8. SPECIAL PRECAUTION FOR R407C........................................................................56
9. INSTALLATION ......................................................................................................... 58
10. REMOTE CONTROLLER OPERATION GUIDE ..................................................... 64
11. SERVICING AND MAINTENANCE ......................................................................... 69
12. OPERATION ............................................................................................................72
13. TROUBLESHOOTING ............................................................................................ 72
14. PART LIST ............................................................................................................. 74
1
Page 3
Product Nomenclature :
1. GENERAL INFORMATION
Brand Name
Brand Name
2. FEATURE
Double
Product
Generation
A : Generation
Triple
Product
Generation
R22
R22
A 4 MS D 1010 A / AR
(A = ACSON)
-
4 R407C
Multi Split
Compressor
(Cooling only)
Capacity
A 4 MS T 101010 A
-
(A = ACSON)
4 R407C
Multi Split
Compressor
Capacity
R : Heatpump
(Cooling only)
Triple S (Slim – Short – Stable)
Slim and short outdoor unit can be easily installed even in a narrow balcony and passageway, and yet have
a stable profile.
MODEL A (cm) B (cm)
AMSD/A4MSD 1010/1015/
1515 A/AR
AMSD 1020A / 1520 A/AR / 2020 A 64.95 43.7
AMST/A4MST 101010 / 101015 / 101515 /
151515 A/AR
AMST 101020 / 101025 / 101525 / 151525 A
AMSH 8K8A/8K66KA/66K66A
66K555A
AMSHK77A 49.4 27.5
2
64.6 33.5
64.95 43.7
64.6 33.5
Page 4
OUTDOOR INDOOR
3. COUPLING VERSATILITY
Cooling :
AMSD / A4MSD 1010/1015/1515A
Heatpump :
AMSD / A4MSD 1010/1015/1515AR
AMSD 1520AR
Cooling : AWMS 10/15F
Heatpump : AWMS 10/15/20FR
Cooling : AWMS 10/15F
Heatpump : AWMS 10/15/20FR
Cooling :
AMSD 1020/1520A
Cooling :
AMSD 2020A
Cooling : AWMS 10/15F
Cooling : AWMS 20F
Cooling : AWMS 20F
Cooling : AWMS 20F
3
Page 5
OUTDOOR INDOOR
AMSHK77A
Cooling :
AMST 101010 / 101015 / 101515 / 151515A
AMST 101020A
A4MST 101010 / 101015 / 101515 / 151515A/AR
Cooling : AWMS 10/15F
Heatpump : AWMS 10/15FR
Cooling : AWMS 10/15F
Heatpump : AWMS 10/15FR
Cooling : AWMS 10/15/20F
Heatpump : AWMS 10/15FR
Cooling :
AMST 101025 / 101525 / 151525A
COOLING :
Single Compressor 2-Indoor
Split System
Cooling : AWMS 10/15F
Cooling : AWMS 10/15F
Cooling : AWMS 25F
A1 : AWMS 15F
A2 : AWMS 15F
COMP
A
A1
A2
4
Page 6
A2 : AWMS 10F
A1 : AWMS 10F
AMSH8K66A
A2 : AWMS 10F
A1 : AWMS 10F
AMSH66K66A
Split System
COOLING :
AMSH8K8A
OUTDOOR INDOOR
A : AWMS 10F
B : AWMS 10F
Double Compressor 2-Indoor
COOLING :
COMP
A
COMP
B
Double Compressor 3-Indoor
COMP
A
COMP
B
A
B
B : AWMS 10F
A1
A2
B
COOLING :
Double Compressor 4-Indoor
COMP
A
COMP
B
B1 : AWMS 10F
B2 : AWMS 10F
A1
A2
B1
B2
5
Page 7
OUTDOOR INDOOR
A1 : AWMS 10F
AMSH66K555A
A3 : AWMS 10F
COOLING :
Double Compressor 5-Indoor
Split System
COMP
A
COMP
B
A2 : AWMS 10F
B1 : AWMS 10F
B2 : AWMS 15F
A1
A2
A3
B1
B2
6
Page 8
OUTDOOR INDOOR
Cooling :
AMSD / A4MSD 1010/1015/1515A
Heatpump :
AMSD / A4MSD 1010/1015/1515AR
AMSD 1520AR
Cooling : AWMS 10/15G
Heatpump : AWMS 10/15/20GR
Cooling : AWMS 10/15G
Heatpump : AWMS 10/15/20GR
Cooling :
AMSD 1020/1520A
Cooling :
AMSD 2020A
Cooling : AWMS 10/15G
Cooling : AWMS 20G
Cooling : AWMS 20G
Cooling : AWMS 20G
7
Page 9
OUTDOOR INDOOR
AMSHK77A
Cooling :
AMST 101010 / 101015 / 101515 / 151515A
AMST 101020A
A4MST 101010 / 101015 / 101515 / 151515A/AR
Cooling : AWMS 10/15G
Heatpump : AWMS 10/15GR
Cooling : AWMS 10/15G
Heatpump : AWMS 10/15GR
Cooling : AWMS 10/15/20G
Heatpump : AWMS 10/15GR
Cooling :
AMST 101025 / 101525 / 151525A
COOLING :
Single Compressor 2-Indoor
Split System
Cooling : AWMS 10/15G
Cooling : AWMS 10/15G
Cooling : AWMS 25G
A1 : AWMS 15G
A2 : AWMS 15G
COMP
A
A1
A2
8
Page 10
AMSH8K66A
AMSH66K66A
Split System
COOLING :
AMSH8K8A
OUTDOOR INDOOR
A : AWMS 10G
B : AWMS 10G
Double Compressor 2-Indoor
COOLING :
COMP
A
COMP
B
Double Compressor 3-Indoor
COMP
A
COMP
B
A
B
A1 : AWMS 10G
A2 : AWMS 10G
B : AWMS 10G
A1
A2
B
COOLING :
Double Compressor 4-Indoor
COMP
A
COMP
B
A1 : AWMS 10G
A2 : AWMS 10G
B1 : AWMS 10G
B2 : AWMS 10G
A1
A2
B1
B2
9
Page 11
OUTDOOR INDOOR
AMSH66K555A
COOLING :
Double Compressor 5-Indoor
Split System
COMP
A
COMP
B
A1 : AWMS 10G
A2 : AWMS 10G
A3 : AWMS 10G
B1 : AWMS 10G
B2 : AWMS 15G
A1
A2
A3
B1
B2
10
Page 12
/
/
4. SPECIFICATIONS
AMSD SERIES COOLING ONLY
MODEL OUTDOOR UNIT
NOMINAL kcal/h 2,394 3,200
COOLING W 2,784 3,722
CAPACITY Btu/h 9,500 12,700
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN MOTOR
FAN
RATED INPUT POWER W 25 30
RATED RUNNING CURRENT A 0.11 0.13
FAN MOTOR PROTECTION
TUBEFIN
COIL
FACE AREA
INDOOR UNIT
DIMENSION
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 38 / 34 / 30 38 / 35 / 31
CONTROL
CONDENSATE DRAIN SIZE mm/in 16 / 0.63
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 18.9 25
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS
TUBEFIN
FACE AREA
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVEL dBA
CASING
TYPE
SIZE
PIPE COMPCOIL
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.825
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT AWMS10F AWMS10F AWMS10F AWMS15F AWMS15F AWMS15F
ONE UNIT RUNNING W 1,018 1,018 1,018 1,459 1,459 1,459
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.47 4.47 4.47 6.43 6.43 6.43
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 300 / 141.6
MEDIUM CFM/LPS 230 / 108.6 270 / 127.4
LOW CFM/LPS 190 /89.7 230 / 108.6
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
ROOM TEMPERATURE
AIR DISCHARGE
OPERATION
DEPTH mm/in
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL
THICKNESS mm/in
FINISHING
LIQUID mm/in 6.35 / 1/4 6.35 / 1/4
GAS mm/in 9.52 / 3/8 12.7 / 1/2
DEPTH mm/in
2
2
m
ft
SEAMLESS BARE COPPER
2
2
m
ft
kg
kg 0.825 0.850
2,394
2,784
9,500
1,890
8.30
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
230 / 108.6
25
38 / 34 / 30
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30
18.9 25
14
62
6.35 / 1/4 6.35 / 1/4
9.52 / 3/8 12.7 / 1/2
R 22 / OUTDOOR CAPILLARY TUBE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
GLASS REINFORCED ACRLY STYRENE RESIN
AMSD1015A AMSD1515AAMSD1010A
2,307 2,758
10.18 12.10
220 ~ 240 / 1 / 50
BUILT IN THERMAL FUSE
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
2
30
OVERLOAD PROTECTION
PROPELLER/DIRECT
406.4 / 16
0.72
80
170
1400 / 660.8
SEAMLESS INNER GROOVED COPPER
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
2
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13.0
63
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
56
0.8 / 0.031
FLARE VALVE
710 / 28.0
982 / 38.7
461 / 18.1
3,200
3,722
12,700
300 / 141.6
270 / 127.4
4 POLES X 12W4 POLES X 10W
16
230 / 108.6190 /89.7
30
0.130.11
38 / 35 / 31
30
64
2 x 0.85
11
Page 13
AMSD SERIES COOLING ONLY
MODEL OUTDOOR UNIT
NOMINAL kcal/h 2,394 4,536 3,200 4,536
COOLING W 2,784 5,275 3,721 5,275
CAPACITY Btu/h 9,500 18,000 12,700 18,000
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
RATED INPUT POWER W 25 46 30 46
RATED RUNNING CURRENT A 0.11 0.19 0.13 0.19
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COILPIPE COIL FAN COMP
ROW
FIN PER INCH
FACE AREA m
INDOOR UNIT
DIMENSION WIDTH mm/in 815 / 32.1 1043 / 41.1 815 / 32.1 1043 / 41.1
WEIGHT kg 9.5 14.5 9.5 14.5
SOUND PRESSURE LEVEL ( H/M/L ) dBA 38 / 34 / 30 45 / 42 / 39 38 / 35 / 31 45 / 42 / 39
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in 16 / 0.63 20 / 0.79 16 / 0.63 20 / 0.79
AIR FILTER
PACKING HEIGHT mm/in 371 / 14.6 484 / 19.1 371 / 14.6 484 / 19.1
DIMENSION WIDTH mm/in 875 / 34.4 1123 / 44.2 875 / 34.4 1123 / 44.2
COMPRESSOR TYPE
NUMBER
CAPACITOR µF 30 45 30 45
LOCK ROTOR AMP A 18.9 56 25 56
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS 1400 / 660.8 2400 / 1132.8 1400 / 660.8 2400 / 1132.8
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA m
OUTDOOR UNIT
DIMENSION WIDTH mm/in 960 / 37.8
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 1.450
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT AWMS10F AWMS20F AWMS15F AWMS20F AWMS20F AWMS20F
ONE UNIT RUNNING W 1,018 2,076 1,459 2,076 2,076 2,076
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.47 10.20 6.43 10.20 10.20 10.20
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 580 / 273.7 300 / 141.6 580 / 273.7
MEDIUM CFM/LPS 230 / 108.6 530 / 250.1 270 / 127.4 530 / 250.1
LOW CFM/LPS 190 /89.7 480 / 226.5 230 / 108.6 480 / 226.5
2
2
HEIGHT mm/in 290 / 11.4 306 / 12.0 290 / 11.4 306 / 12.0
/ft
DEPTH mm/in 179 / 7.0 189 / 7.4 179 / 7.0 189 / 7.4
ROOM TEMPERATURE
OPERATION
DEPTH mm/in 269 / 10.6 292 / 11.5 269 / 10.6 292 / 11.5
2
2
HEIGHT mm/in 631.7 / 24.9
/ft
DEPTH mm/in 437 / 17.2
MATERIAL
FINISHING
LIQUID mm/in
GAS mm/in 9.52 / 3/8 15.88 / 5/8 12.70 / 1/2 15.88 / 5/8
DEPTH mm/in
kg 1.100 1.600 1.100 1.600
AMSD1020A AMSD1520A AMSD2020A
4,536
5,275
18,000
3,050
4 POLES x 10W
14.7 16.2
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
4 POLES x
20W
SEAMLESS INNER GROOVED COPPER
220 ~ 240 / 1 / 50
R 22 / OUTDOOR CAPILLARY TUBE
4 POLES x 12W 4 POLES x 20W
BUILT IN THERMAL FUSE
7.0 / 0.276
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.28 / 0.011
0.11 / 0.0043
2
18
0.193/2.08 0.224 / 2.411 0.193/2.08 0.224 / 2.411
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
WASHABLE SARANET FILTER
ROTARY
2
OVERLOAD PROTECTION
ALUMINIUM ALLOY WITH ELECTRO- DEPOSITED EPOXY & GLASS REINFORCED
59 59 61
6.35 / 1/4
PROPELLER/DIRECT
457.2 / 18
0.61
50
137
SEAMLESS BARE COPPER
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.127 / 0.005
3
14
0.586 / 6.31
99 106 95
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY-POLYESTER POWDER
FLARE VALVE / FITTING
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
4,1503,350
20.4
580 / 273.7
530 / 250.1
480 / 226.5
4 POLES x 20W
46
0.19
0.224 / 2.411
306 / 12.0
1043 / 41.1
189 / 7.4
14.5
45 / 42 / 39
20 / 0.79
484 / 19.1
1123 / 44.2
292 / 11.5
45
56
482.6 / 19
0.93
150
214
2400 / 1132.8
6.35 / 1/4
15.88 / 5/8
12
Page 14
AMSD SERIES HEAT PUMP UNIT
MODEL OUTDOOR UNIT
NOMINAL kcal/h
COOLING W
CAPACITY Btu/h
NOMINAL kcal/h
HEATING W
CAPACITY Btu/h
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT
(COOLING)
RATED RUNNING
CURRENT
(HEATING)
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
RATED INPUT POWER W 25 30
RATED RUNNING CURRENT A 0.11 0.13
FAN MOTOR PROTECTION
COIL
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
COMP
LOCK ROTOR AMP A
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS
COIL
FACE AREA
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVEL dBA
CASING
TYPE
SIZE LIQUID mm/in
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.775 2 x 0.900
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT
ONE / TWO UNIT RUNNING
ONE / TWO UNIT RUNNING
ONE UNIT RUNNING W 1,000 1,000 1,000 1,240 1,240 1,240
TWO UNITS RUNNING W
ONE UNIT RUNNING W 1,160 1,160 1,160 1,358 1,358 1,358
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.50 4.50 4.50 5.59
TWO UNITS RUNNING A
ONE UNIT RUNNING A 5.10 5.10 5.10 6.05
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
HEIGHT mm/in
2
/ft
m
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL
THICKNESS mm/in
FINISHING
2
/ft
m
kg
GAS mm/in
DEPTH mm/in
kg 0.775 0.900
AMSD1010AR AMSD1015AR AMSD1515AR
AWMS10FR AWMS10FR AWMS10FR AWMS15FR AWMS15FR AWMS15FR
2343 / 2293 3024 / 2898
2726 / 2667 3517 / 3370
9300 / 9100 12000 / 11500
2746 / 2696 3276 / 3024
3195 / 3136 3810 / 3517
10900 / 10700 13000 / 12000
1,862
2,343 3,024
2,726 3,517
9,300 12,000
2,746 3,276
3,195 3,810
10,900 13,000
2,123 2,472
2,046 2,370 2,450
8.30 9.50
9.20 10.40
220 ~ 240 / 1 / 50
R22 / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
230 / 108.6
190 /89.7
4 POLES X 10W 4 POLES X 12W
25 30
0.11 0.13
2
38 / 34 / 30
MICROCOMPUTER CONTROLLED THERMOSTAT
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30 30
18.9 25
2
63
6.35 / 1/4
9.52 / 3/8 12.7 / 1/2
300 / 141.6 300 / 141.6
230 / 108.6 270 / 127.4
190 /89.7 230 / 108.6
BUILT IN THERMAL FUSE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
38 / 34 / 30 38 / 35 / 31
16 / 0.63
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
2
18.9 25
OVERLOAD PROTECTION
PROPELLER/DIRECT
406.4 / 16
0.72
80
170
1400 / 660.8
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
2
16
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13.0
64 65
56
GALVANISED MILD STEEL
0.8 / 0.031
EPOXY-POLYESTER POWDER
FLARE VALVE
6.35 / 1/4 6.35 / 1/4
9.52 / 3/8 12.7 / 1/2
710 / 28.0
982 / 38.7
461 / 18.1
5.59 5.59
6.05 6.05
300 / 141.6
270 / 127.4
230 / 108.6
38 / 35 / 31
11.18
11.04
30
6.35 / 1/4
13
Page 15
AMSD SERIES HEAT PUMP UNIT
L
T
A
R
R
Y
Y
V
L
R
T
A
L
R
L
A
E
E
R
R
A
L
R
T
A
L
R
L
L
A
L
G
D
.
:
.
A
R
MODE
NOMINAL kcal/h
COOLING W
CAPACIT
NOMINAL kcal/h
HEATING W
CAPACIT
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT (COOLING)
RATED RUNNING
CURRENT (HEATING)
POWER SOURCE
REFRIGERANT / CONTRO
FAN TYPE
AIR FLOW
FAN MOTO
FAN
RATED INPUT POWER W 30 40
RATED RUNNING CURREN
FAN MOTOR PROTECTION
TUBEFIN
COIL
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dB
CONTROL AIR DISCHARG
CONDENSATE DRAIN SIZ
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBE
CAPACITO
COMPFAN
LOCK ROTOR AMP
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIA
DIAMETE
RATED RUNNING CURREN
RATED OUTPUT POWER W
RATED INPUT POWER W
TUBEFIN
COIL
FACE AREA m2/ft
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVE
CASING
TYPE
SIZE LIQUI
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION
OUTDOOR UNIT
INDOOR UNI
ONE / TWO UNIT RUNNING
ONE / TWO UNIT RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIA
THICKNESS mm/in
FINISHIN
GAS mm/in 12.70 / 1/2 15.88 / 5/8
DEPTH mm/in
Btu/h
Btu/h
/Ph/Hz
mm/in
2
UTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
mm/in
µF 30 45
mm/in
mm/in
2
kg
dB
mm/in 6.35 / 1/4 6.35 / 1/4
kg 0.925 1.650
WMS15F
3024 / 2772 4536 / 4536
3517 / 3224 5275 / 5275
12000 / 11000 18000 / 18000
3276 / 3024 5040 / 4788
3810 / 3517 5862 / 5568
13000 / 12000 20000 / 19000
1,345 2,195
1,378 2,412
5.99 11.86
6.19 12.96
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6 580 / 273.7
270 / 127.4 530 / 250.1
230 / 108.6 480 / 226.5
4 POLES x 12W 4 POLES x 20W
0.13 0.19
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.193 / 2.08 0.224 / 2.411
290 / 11.4 306 / 12.0
815 / 32.1 1043 / 41.1
179 / 7.0 189 / 7.4
9.5 14.5
38 / 35 / 31 45 / 42 / 39
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
16 / 0.63 20 / 0.79
371 / 14.6 484 / 19.1
875 / 34.4 1123 / 44.2
269 / 10.6 292 / 11.5
25 56
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
MSD1520A
3,462
3,477
17.37
17.57
220 ~ 240 / 1 / 50
R22 / OUTDOOR CAPILLARY TUBE
BUILT IN THERMAL FUSE
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
WASHABLE SARANET
ROTARY
2
OVERLOAD PROTECTION
PROPELLER/DIRECT
482.6 / 19
0.98
150
222
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960.0 / 37.8
437.0 / 17.2
100
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
61
0.8 / 0.031
FLARE VALVE
813 / 32.0
1144 / 45.0
611 / 24.1
AWMS20F
14
Page 16
A4MSD SERIES COOLING ONLY(50HZ)+A6
/
MODEL INDOOR UNIT
NOMINAL kcal/h 2,268 3,024
COOLING W 2,638 3,517
CAPACITY Btu/h 9,000 12,000
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN MOTOR
FAN
RATED INPUT POWER W 25 30
RATED RUNNING CURRENT A 0.11 0.13
FAN MOTOR PROTECTION
TUBE
COIL
FIN
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 38 / 34 / 30 38 / 35 / 31
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in 16 / 0.63
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A
COMP
PROTECTION DEVICE
POWER SOURCE V/Ph/Hz
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
TUBEFIN
COIL
FACE AREA m
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVEL dBA
CASING
TYPE
SIZE LIQUID mm/in
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.750 2 x 0.800
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT AWMS10F AWMS10F AWMS10F AWMS15F AWMS15F AWMS15F
ONE UNIT RUNNING W 1,035 1,035 1,035 1,566 1,566 1,566
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.40 4.40 4.40 7.00 7.00 7.00
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 300 / 141.6
MEDIUM CFM/LPS 230 / 108.6 270 / 127.4
LOW CFM/LPS 190 /89.7 230 / 108.6
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
2
2
m
ft
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL ALUMINIUM (SLIT FIN TYPE)
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL GALVANISED MILD STEEL
THICKNESS mm/in
FINISHING
2
2
/ft
kg
GAS mm/in
DEPTH mm/in
kg 0.750 0.800
A4MSD1010A A4MSD1015A A4MSD1515A
2,268 3,024
2,638 3,517
9,000 12,000
1,900 2,431 2,962
8.08 10.70
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
230 / 108.6
190 /89.7
4 POLES X 10W
25 30
0.11 0.13
SEAMLESS INNER GROOVED COPPER
38 / 34 / 30
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
62
6.35 / 1/4
9.52 / 3/8
220 ~ 240 / 1 / 50
R407C / OUTDOOR CAPILLARY TUBE
BUILT IN THERMAL FUSE
7.0 / 0.276
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
2
30
OVERLOAD PROTECTION
220 ~ 240 / 1 / 50
PROPELLER/DIRECT
406.4 / 16
0.72
80
170
9.52 / 3/8
0.33 / 0.013
0.12 / 0.005
2
16
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13
63 64
54
0.8 / 0.031
EPOXY-POLYESTER POWDER
FLARE VALVE
710 / 28.0
982 / 38.7
461 / 18.1
4 POLES X 12W
6.35 / 1/4
12.7 / 1/2
3220
13.28
300 / 141.6
270 / 127.4
230 / 108.6
38 / 35 / 31
15
Page 17
A4MSD SERIES HEAT PUMP UNIT
T
A
R
A
R
A
R
A
R
A
R
Y
Y
V
L
R
T
A
L
R
L
A
A
E
E
R
R
A
L
R
T
A
L
R
L
L
A
L
G
D
.
:
.
A
R
A
R
R
MODEL
NOMINAL kcal/h
COOLING W
CAPACIT
NOMINAL kcal/h
HEATING W
CAPACIT
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT (COOLING)
RATED RUNNING
CURRENT (HEATING)
POWER SOURCE
REFRIGERANT / CONTRO
FAN TYPE
AIR FLOW
FAN MOTO
FAN
RATED INPUT POWER W 25 30
RATED RUNNING CURREN
FAN MOTOR PROTECTION
MATERIA
DIAMETE
TUBE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dB
CONTROL
CONDENSATE DRAIN SIZ
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBE
CAPACITO
COMP
LOCK ROTOR AMP
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIA
DIAMETE
RATED RUNNING CURREN
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIA
DIAMETE
TUBE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA m2/ft
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVE
CASING
TYPE
SIZE LIQUI
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.725 2 x 0.800
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION
OUTDOOR UNIT
INDOOR UNI
ONE / TWO UNIT
RUNNING
ONE / TWO UNIT
RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
IR DISCHARG
OPERATION
DEPTH mm/in
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIA
THICKNESS mm/in
FINISHIN
GAS mm/in
DEPTH mm/in
Btu/h
Btu/h
/Ph/Hz
mm/in
mm/in
µF
mm/in
mm/in
kg
dB
mm/in
kg 0.750 0.800
2
2
4MSD1010A
WMS10F
994 994 994 1466 1466 1466
992 992 992 1476 1476 1476
4.21 4.21 4.21 6.71 6.71 6.71
4.21 4.21 4.21 6.71 6.71 6.71
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
WMS10F
2268 / 2268 2772 / 2646
2638 / 2268 3224 / 3077
9000 / 9000
2394 / 2668 3024 / 2898
2784 / 2638 3517 / 3370
9500 / 9000 12000 / 11500
1820
8.14
7.74
R407C / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
230 / 108.6
190 /89.7
4 POLES X 10W 4 POLES X 12W
25 30
0.11 0.13
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
38 / 34 / 30
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30
20
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
63
6.35 / 1/4
9.52 / 3/8
4MSD1015A
WMS10F
2268 / 2268 2772 / 2646
2638 / 2638 3224 / 3077
9000 / 9000 11000 / 10500
2394 / 2668 3024 / 2898
2784 / 2638 3517 / 3370
9500 / 9000 12000 / 11500
220 ~ 240 / 1 / 50
300 / 141.6 300 / 141.6
230 / 108.6 270 / 127.4
190 /89.7 230 / 108.6
0.11 0.13
BUILT IN THERMAL FUSE
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
0.193 / 2.08
38 / 34 / 30 38 / 35 / 31
WASHABLE SARANET
OVERLOAD PROTECTION
PROPELLER/DIRECT
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
0.51 / 5.53
646 / 25.4
GALVANISED MILD STEEL
0.8 / 0.031
EPOXY-POLYESTER POWDER
FLARE VALVE
WMS15FRAWMS15F
2245
10.52
10.02
2
18
290 / 11.4
815 / 32.1
179 / 7.0
9.5
16 / 0.63
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
2
406.4 / 16
0.72
80
170
9.52 / 3/8
2
16
840 / 33.1
330 / 13.0
64 65
54
710 / 28.0
982 / 38.7
461 / 18.1
30
32
6.35 / 1/4
12.7 / 1/2
A4MSD1515A
11000 / 10500
281823651914
2672
12.9
12.3
300 / 141.6
270 / 127.4
230 / 108.6
38 / 35 / 31
WMS15F
16
Page 18
AMST SERIES COOLING ONLY
MODEL
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION
RATED TOTAL RUNNING CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
INPUT POWER W 30 25
RUNNING CURRENT A
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
COIL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 25 18.9
INPUT POWER W 771 1290 / 1290
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
FAN
RATED RUNNING CURRENT A
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIAL
DIAMETER mm/in
TUBEFIN TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
OUTDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in
PIPE COMPCOIL
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT
INDOOR UNIT
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in
DEPTH mm/in
kcal/h
AMST101010A AMST151515A
3 x AWMS10F 2 x AWMS10F AWMS15F AWMS10F 2 x AWMS15F 3 x AWMS15F
3 x 2394 2 x 2394 3,200 2,394 2 x 3,200 3 x 3200
W
Btu/h
W 2,616 4,176
A 11.1 18.4
2
m
/ft
2
m
/ft
kg 3 x 0.800 2 x 0.800 0.825 0.800 2 x 0.825 3 x 0.825
3 x 2784 2 x 2784 3,721 2,784 2 x 3,721 3 x 3721
3 x 9500 2 x 9500 12,700 9,500 2 x 12,700 3 x 12700
300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6
230 / 108.6 230 / 108.6 270 / 127.4 230 / 108.6 270 / 127.4 270 / 127.4
190 /89.7 190 /89.7 230 / 108.6 190 /89.7 230 / 108.6 230 / 108.6
4 POLES x 10W 4 POLES x 12W
25 30
0.11
2
38 / 34 / 30
18.9 25
2
97 109
61 62
9.52 / 3/8 12.7 / 1/2
AMST101015A
3,136 3,656
13.6
220 ~ 240 / 1 / 50
R22 / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW FAN
4 POLES x 12W 4 POLES x 10W
0.13 0.11
BUILT IN THERMAL FUSE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
101 105
61 62
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
38 / 35 / 31 38 / 34 / 30
9.5
16 / 0.63
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
3
30
OVERLOAD PROTECTION
PROPELLER / DIRECT
482.6 / 19
0.92
150
228
SEAMLESS BARE COPPER
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960 / 37.8
437 / 17.2
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
12.7 / 1/2 9.52 / 3/8
824 / 32.4
1,194 / 47.0
611 / 24.1
AMST101515A
16.0
0.13
38 / 35 / 31
17
Page 19
AMST SERIES COOLING ONLY
MODEL
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION W
RATED TOTAL RUNNING CURRENT A
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
INPUT POWER W 25 69 25 30 69 30
RUNNING CURRENT A
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
COIL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 18.9 70 18.9 18.9 70 25 / 25
COMP
INPUT POWER W 823 2430 745 1250 2430 1250
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
FAN
RATED RUNNING CURRENT A
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
FACE AREA
OUTDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg 123
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in 6.35 / 1/4 9.52 / 3/8 6.35 / 1/4 6.35 / 1/4 9.52 / 3/8 6.35 / 1/4
PIPE COIL
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT
INDOOR UNIT
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in 9.52 / 3/8 15.88 / 5/8 9.52 / 3/8 12.7 / 1/2 15.88 / 5/8 12.7 / 1/2
DEPTH mm/in
kcal/h
W
Btu/h
2
2
m
/ft
2
2
/ft
m
kg 2 x 0.740 1.440 0.740 0.870 1.440 2 x 0.870
AMST101025A
2 x AWMS10F AWMS25F AWMS10F AWMS15F AWMS25F 2 x AWMS15F
2 x 2,394 5,796 2,394 3,024 5,796 3,024
2 x 2,784 6,741 2,784 3,517 6,741 3,517
2 x 9,500 23,000 9,500 12,000 23,000 12,000
3,142 4,749
13.7
R22 / OUTDOOR CAPILLARY TUBE
300 / 141.6 660 / 311.5 300 / 141.6 300 / 141.6 660 / 311.5 300 / 141.6
230 / 108.6
190 /89.7
4 POLES x 10W 4 POLES x 25W 4 POLES x 10W 4 POLES x 12W 4 POLES x 25W 4 POLES x 12W
0.11
22 22
18 18 18 18
0.193 / 2.08 0.254 / 2.733 0.254 / 2.733 0.193 / 2.08
290 / 11.4 306 / 12.0 306 / 12.0 290 / 11.4
815 / 32.1 1062 / 41.8 1062 / 41.8 815 / 32.1
179 / 7.0 202 / 8.0 202 / 8.0 179 / 7.0
9.5 16 16 9.5
38 / 34 / 30 47 / 44 / 42 47 / 44 / 42 38 / 34 / 30
16 / 0.63 20 / 0.79 20 / 0.79 16 / 0.63
371 / 14.6 484 / 19.1 484 / 19.1 371 / 14.6
875 / 34.4 1123 / 44.2 1123 / 44.2 875 / 34.4
269 / 10.6 292 / 11.5 292 / 11.5 269 / 10.6
30 / 30 50 30 30 50 30 / 30
580 / 273.7
500 / 236.0
0.29
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
ANTI FUNGUS CROSS FLOW FAN
230 / 108.6 270 / 127.4
190 /89.7 230 / 108.6
0.11 0.13
BUILT IN THERMAL FUSE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
WASHABLE SARANET
OVERLOAD PROTECTION
PROPELLER / DIRECT
GLASS REINFORCED ACRLY STYRENE RESIN
ALUMINIUM (SLIT FIN TYPE)
GALVANISED MILD STEEL
EPOXY POLYESTER POWDER
AMST101525A
7.0 / 0.276
0.28 / 0.011
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
38 / 34 / 30
16 / 0.63
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
3
610 / 24
1.1
145
241
9.52 / 3/8
0.35 / 0.014
2
16
0.87 / 9.33
850 / 33.46
400 / 15.75
57
0.8 / 0.031
560 / 22.05
22.5
120117
220 ~ 240 / 1 / 50
0.11 / 0.0043
SEAMLESS COPPER
0.127 / 0.005
1030 / 40.55
FLARE VALVE
1000 / 39.37
1200 / 47.24
580 / 273.7
500 / 236.0
0.29
AMST151525A
270 / 127.4
230 / 108.6
0.13
18
Page 20
A4MST SERIES COOLING ONLY
2
/
2
2
/
2
MODEL OUTDOOR UNIT A4MST101010A A4MST151515A
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION W 2580 4161
RATED TOTAL RUNNING CURRENT A 11.1 19.0
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
FAN TYPE
AIR FLOW
FAN
FAN MOTOR 4 POLES x 10W 4 POLES x 10W 4 POLES x 12W 4 POLES x 10W 4 POLES x 12W 4 POLES x 12W
INPUT POWER W 25 25 30 25 30 30
RUNNING CURRENT A 0.11 0.11 0.13 0.11 0.13 0.13
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 38 / 34 / 30 38 / 34 / 30 38 / 35 / 31 38 / 34 / 30 38 / 35 / 31 38 / 35 / 31
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 20 20 25 20 25 25
COMP
INPUT POWER W 758 758 1281 758 1281 1281
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
MOTOR OUTPUT W
RATED INPUT POWER W
AIR FLOW CFM/LPS
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
FIN
ROW
OUTDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg 97 109
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE kg 3 x 0.750 2 x 0.750 0.775 0.750 2 x 0.775 3 x 0.775
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
FIN PER INCH
FACE AREA
TYPE
SIZE LIQUID mm/in
PIPE
INDOOR UNIT 3 x AWMS10F 2 x AWMS10F AWMS15F AWMS10F 2 x AWMS15F 3 x AWMS15F
HIGH CFM/LPS 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6
MEDIUM CFM/LPS 230 / 108.6 230 / 108.6 270 / 127.4 230 / 108.6 270 / 127.4 270 / 127.4
LOW CFM/LPS 190 /89.7 190 /89.7 230 / 108.6 190 /89.7 230 / 108.6 230 / 108.6
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in 9.52 / 3/8 9.52 / 3/8 12.7 / 1/2 9.52 / 3/8 12.7 / 1/2 12.7 / 1/2
DEPTH mm/in
kcal/h 3 x 2268 2 x 2268 3024 2268 2 x 3024 3 x 3024
W 3 X 2638 2 X 2638 3517 2638 2 x 3517 3 x 3517
Btu/h 3 X 9000 2 X 9000 12000 9000 2 x 12000 3 x 12000
m
ft
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
m
ft
A4MST101015A A4MST101515A
3107
13.8 16.5
SEAMLESS INNER GROOVED COPPER
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
101 105
220 ~ 240/1/50
R407C / CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW FAN
BUILT IN THERMAL FUSE
7.0 / 0.276
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
16 / 0.63
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
3
30
OVERLOAD PROTECTION
PROPELLER / DIRECT
482.6 / 19
0.98
150
230
2400 / 1133
SEAMLESS COPPER
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960 / 37.8
437 / 17.2
61
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
3634
19
Page 21
A4MST-AR SERIES HEATPUMP
2
/
2
2
/
2
MODEL OUTDOOR UNIT A4MST101010AR A4MST151515AR
NOMINAL kcal/h 3 x 2268 2 x 2268 3024 2268 2 x 3024 3 x 3024
COOLING W 3 x 2638 2 x 2638 3517 2638 2 x 3517 3 x 3517
CAPACITY Btu/h 3 x 9000 2 x 9000 12000 9000 2 x 12000 3 x 12000
NOMINAL kcal/h 3 x 2268 2 x 2268 2772 2268 2 x 2772 3 x 2772
HEATING W 3 x 2638 2 x 2638 3224 2638 2 x 3224 3 x 3224
CAPACITY Btu/h 3 x 9000 2 x 9000 11000 9000 2 x 11000 3 x 11000
RATED TOTAL POWER CONSUMPTION (COOLING) W 2691 3825
RATED TOTAL POWER CONSUMPTION (HEATING) W 2439 3441
RATED TOTAL RUNNING CURRENT (COOLING) A 11.7 17.7
RATED TOTAL RUNNING CURRENT (HEATING) A 10.6 17.1
POWER SOURCE V/Ph/Hz
REFRIGERANT
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
INPUT POWER W 25 25 30 25 30 30
RUNNING CURRENT A 0.11 0.11 0.13 0.11 0.13 0.13
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
OPTIONAL AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A
COMPFANCOILPIPE
INPUT POWER (cooling / heating) W
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
MOTOR OUTPUT W
RATED INPUT POWER W
AIR FLOW CFM/LPS
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
OUTDOOR UNIT
FACE AREA
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE kg 3 x 0.885 2 x 0.885 0.965 0.885 2 x 0.965 3 x 0.965
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT 3 x AWMS10FR 2 x AWMS10FR AWMS15FR AWMS10FR 2 x AWMS15FR 3 x AWMS15FR
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in
DEPTH mm/in
m
m
300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6 300 / 141.6
230 / 108.6 230 / 108.6 270 / 127.4 230 / 108.6 270 / 127.4 270 / 127.4
190 /89.7 190 /89.7 230 / 108.6 190 /89.7 230 / 108.6 230 / 108.6
4 POLES x 10W 4 POLES x 10W 4 POLES x 12W 4 POLES x 10W 4 POLES x 12W 4 POLES x 12W
ft
38 / 34 / 30 38 / 34 / 30 38 / 35 / 31 38 / 34 / 30 38 / 35 / 31 38 / 35 / 31
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
20 20 25 20 25 25
796 / 712 796 / 712 1169 / 1041 796 / 712 1169 / 1041 1169 / 1041
ft
97 109
9.52 / 3/8 9.52 / 3/8 12.7 / 1/2 9.52 / 3/8 12.7 / 1/2 12.7 / 1/2
A4MST101015AR A4MST101515AR
3069 3759
2773 3314
13.7 16.7
12.9 15.7
220 ~ 240 / 1 / 50
R407C / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW FAN
BUILT IN THERMAL FUSE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
DUAL ACTION ELECTROSTATIC AIR PURIFYING AND DEODORIZING FILTER
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
101 105
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
16 / 0.63
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
3
30
OVERLOAD PROTECTION
PROPELLER / DIRECT
482.6 / 19
0.98
150
228
2400 / 1133
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960 / 37.8
437 / 17.2
66
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
20
Page 22
AMSH SERIES - COOLING ONLY
MODELS
POWER SOURCE V/Ph/Hz
REFRIGERANT
FAN TYPE
AIR FLOW CFM/LPS
FAN MOTOR
FANCOIL
RATED INPUT POWER W
RATED RUNNING CURRENT A
FAN MOTOR PROTECTION
TUBE
FIN
FACE AREA
INDOOR UNIT
DIMENSION
WEIGHT
SOUND LEVEL - H / M / L dBA
CONTROL
CONDENSATE DRAIN SIZE mm/in
AIR FILTER *
PACKING
DIMENSION
COMPRESSOR TYPE
NUMBER
CAPACITOR µF 30
COMPCOIL FAN
LOCK ROTOR AMP A 25
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in 355.6 / 14
RATED RUNNING CURRENT A 0.28
RATED OUTPUT POWER W 30
RATED INPUT POWER W 62
TUBE
FIN
FACE AREA (m2/ft2) 0.32 / 3.50
DIMENSION WIDTH (mm/in) 740 / 29.1"
OUTDOOR UNIT
DIMENSION
WEIGHT kg 62 63 64 35
CASING MATERIAL
NOISE LEVEL dBA 50
TYPE
PIPE
PIPE SIZE
PACKING
DIMENSION
REFRIGERANT CHARGE 0.925 / 0.875
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT AMSH8K8A AMSH8K66A AMSH66K66A AMSH K77A
INDOOR UNIT AWMS10F (X2) AWMS10F (X3) AWMS10F (X4) AWMS10F (X4) AWMS15F AWMS15F X 2
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN/DIRECT
4 POLES X 10W
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
ROOM TEMPERATURE
AIR DISCHARGE
OPERATION
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH 18
HEIGHT (mm/in) 494 / 19.4"
DEPTH (mm/in) 270 / 10.6"
HEIGHT mm/in 558 / 22.0
WIDTH mm/in 851 / 33.5
DEPTH mm/in 401 / 15.8
THICKNESS mm/in
FINISH
LIQIUD mm/in
GAS mm/in
HEIGHT mm/in 558 / 2.0
WIDTH mm/in 851 / 33.5
DEPTH mm/in 401 / 15.8
2
2
/ft
m
kg
38 / 34 / 30
MICROCOMPUTER CONTROLLED THERMOSTAT
AUTOMATIC LOUVER (UP & DOWN) & GRILLE (LEFT & RIGHT)
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
15 / 15
GLASS REINFORCED ACRLY STYRENE RESIN
406.4 / 16
0.51 / 5.53
646 / 25.4 "
840 / 33.1 "
330 / 13 "
646 / 25.4
840 / 33.1
330 / 13.0
9.52 / 3/8
710 / 28.0
982 / 38.7
461 / 18.1
kg 2 x 0.675 0.925 / 0.625 2 x 0.825 0.825
220 ~ 240 / 1 / 50
R 22 / OUTDOOR CAPILLARY TUBE
300 / 142
26
0.11
BUILT IN THERMAL FUSE
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
2
25
0.72
80
170
SEAMLESS INNER GROOVED COPPER
2
16
56
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.193 / 2.08
290 / 11.4
815 / 32.1
179 / 7.0
9.5
16 / 0.63
WASHABLE SARANET
371 / 14.6
875 / 34.4
269 / 10.6
ROTARY
OVERLOAD PROTECTION
PROPELLER/DIRECT
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
GALVANISED MILD STEEL
0.8 / 0.031
EPOXY-POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
AMSH 66K555A
4 POLES X 12W
38 / 35 / 31
21 / 21
65
12.7 / 1/2
1
1
21
Page 23
COOLING CAPACITY
AMSH SERIES - COOLING ONLY
MODEL OUTDOOR UNIT
INDOOR UNIT
NOMINAL NUMBER OF UNIT ONE UNIT RUNNING TWO UNITS RUNNING
COOLING OPERATING A OR B A + B
CAPACITY kcal/h 3100 1840 + 1840
W 3605 2140 + 2140
Btu/h 12300 7300 + 7300
POWER CONSUMPTION (W) 1389 1445
RUNNING CURRENT (A) 6.1 6.4
AMSHK77A
INDOOR A,B : AWMS15F X 2
AMSH8K8A
INDOOR UNIT A, B : AWMS10F X 2
ONE UNIT RUNNING
A OR B A + B
2091
2433
8300
804
3.4
TWO UNITS RUNNING
2091 + 2091
2433 + 2433
8300 + 8300
1466
6.1
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING A1 OR A2 B A1+A2 A1+B, OR A2+B
CAPACITY kcal/h 2520 2041 1613 + 1613 2520 + 2041
POWER CONSUMPTION (W) 1150 835 1246 1840
RUNNING CURRENT (A) 5.0 3.6 5.3 7.9
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING A1+A2, OR B1+B2 A1+B1, OR A2+B2
CAPACITY kcal/h 1613 + 1613 2520 + 2520
POWER CONSUMPTION (W) 1248 2188
RUNNING CURRENT (A) 5.4 9.6
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 2520 3024 2 X 1613 1512 + 1764 2 X 2520 2520 + 3024
POWER CONSUMPTION (W) 1207 1262 1288 1301 2244 2299
RUNNING CURRENT (A) 5.3 5.5 5.6 5.7 9.9 10.1
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 3 X 1134 2 X 1613 + 2520 2 X 1613 + 3024 2520 + 1512 +1764
POWER CONSUMPTION (W) 1332 2325 2380 2338
RUNNING CURRENT (A) 5.8 10.2 10.4 10.3
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 3 X 1134 + 2520 3 X 1134 + 3024 2 X 1613 + 1512 + 1764
POWER CONSUMPTION (W) 2369 2424 2419
RUNNING CURRENT (A) 10.4 10.5 10.6
INDOOR UNIT
W 2931 2374 1876 + 1876 2931 + 2374
Btu/h 10000 8100 6400 + 6400 10000 + 8100
INDOOR UNIT
W 1876 + 1876 2931 + 2931
Btu/h 6400 + 6400 10000 + 10000
INDOOR UNIT
W 2931 3517 2 X 1876 1578 + 2052 2 X 2931 2931 + 3517
Btu/h 10000 12000 2 X 6400 6000 + 7000 2 X 10000 10000 + 12000
INDOOR UNIT
W 3 X 1319 2 X 1876 + 2931 2 X 1876 +3517 2931 + 1758 + 2052
Btu/h 3 X 4500 2 X 6400 + 10000 2 X 6400 + 10000 10000 + 6000 + 7000
INDOOR UNIT
A1 + A2 + A3 + B1 A1 + A2 + A3 + B2 A1 + A2 + B1 + B2
W 3 X 1319 + 2931 3 X 1319 + 3517 2 X 1876 + 1758 + 2052
Btu/h 3 X 4500 + 10000 3 X 4500 + 12000 2 X 6400 + 6000 + 7000
ONE UNIT RUNNING TWO UNITS RUNNING
ONE UNIT RUNNING TWO UNITS RUNNING FOUR UNITS RUNNING
A1, A2, B1, OR B2 A1+A2+B1+B2
2520 4 X 1613
2931 4 X 1876
10000 4 X 6400
1164 2355
5.1 10.2
ONE UNIT RUNNING
A1,A2,A3, OR B1 B2
INDOOR UNIT A1, A2,A3, B1 : AWMS10F X 4, B2 : AWMS15F
THREE UNIT RUNNING
A1 + A2 +A3 A1 + A2 + B1 A1 + A2 + B2 A1 + B1 + B2
INDOOR UNIT A1, A2,A3, B1 : AWMS10F X 4, B2 : AWMS15F
FOUR UNITS RUNNING FIVE UNITS RUNNING
INDOOR UNIT A1, A2, B : AWMS10F X 2
INDOOR UNIT A1, A2, B1, B2 : AWMS10F X 2
INDOOR UNIT A1, A2,A3, B1 : AWMS10F X 4, B2 : AWMS15F
A1+A2,A2+A3, OR A3+A1
AMSH66K555A
AMSH8K66A
THREE UNITS RUNNING
A1+A2+B
1613 + 1613 + 2041
1876 + 1876 +2374
6400 + 6400 + 8100
1940
8.2
AMSH66K66A
AMSH66K555A
TWO UNITS RUNNING
B1+B2 (A1,A2, OR A3) + B1 (A1,A2, OR A3) + B2
AMSH66K555A
A1 + A2 + A3 + B1 + B2
3 X 1134 + 1512 + 1764
3 X 1319 + 1758 + 2052
3 X 4500 + 6000 + 7000
2464
10.8
22
Page 24
AMSD SERIES COOLING ONLY
/
/
MODEL OUTDOOR UNIT
NOMINAL kcal/h 2,394 3,200
COOLING W 2,784 3,721
CAPACITY Btu/h 9,500 12,700
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN MOTOR
FAN
RATED INPUT POWER W 26 29
RATED RUNNING CURRENT A 0.11 0.13
FAN MOTOR PROTECTION
TUBEFIN
COIL
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 39 / 34 /28 42/36/29
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE ROTARY
NUMBER
CAPACITOR µF 30 30
LOCK ROTOR AMP A 20 25
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS
TUBEFIN
FACE AREA
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVEL dBA 56
CASING
TYPE FLARE VALVE
SIZE
PIPE COMPCOIL
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT AWMS10G AWMS10G AWMS10G AWMS15G AWMS15G AWMS15G
ONE / TWO UNIT
RUNNING
ONE UNIT RUNNING W 1,018 1,018 1,018 1,459 1,459 1,459
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.47 4.47 4.47 6.43 6.43 6.43
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 345 / 162.82
MEDIUM CFM/LPS 250 / 117.99 285 / 134.51
LOW CFM/LPS 200 / 94.39 220 / 103.83
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
2
2
m
ft
2,394
2,784
9,500
1,864
8.3
300 / 141.6
250 / 117.99
200 / 94.39
4 POLES X 9W
26
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
39 / 34 / 28
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
DEPTH mm/in
30
20 25
GLASS REINFORCED ACRLY STYRENE RESIN
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW 2
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL
THICKNESS mm/in
FINISHING EPOXY-POLYESTER POWDER
LIQUID mm/in
GAS mm/in 9.52 / 3/8 12.7 / 1/2
DEPTH mm/in
2
m
kg 62
kg 0.825 0.850
SEAMLESS COPPER SEAMLESS INNER GROOVED COPPER
0.35 / 0.014 0.33 / 0.013
2
ft
14 16
9.52 / 3/8 12.7 / 1/2
2 x 0.825 2 x 0.85
AMSD1015A AMSD1515AAMSD1010A
2,310
10.2
220 ~ 240 / 1 / 50
R 22
THERMAL OVERLOAD RELAY
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
337 / 13.3
957 / 37.7
270 / 10.6
2
OVERLOAD PROTECTION
PROPELLER/DIRECT
420 / 16.5
0.66 / 0.80
80 / 80
152 / 178
1400 / 660.8
9.52 / 3/8
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13
63
GALVANISED MILD STEEL
0.8 / 0.031
6.35 / 1/4
710 / 28.0
982 / 38.7
461 / 18.1
345 / 162.82
285 / 134.51
4 POLES X 13W
220 / 103.83
42/36/29
3,200
3,721
12,700
2,756
12.1
29
0.130.11
30
64
23
Page 25
AMSD SERIES COOLING ONLY
MODEL OUTDOOR UNIT
NOMINAL kcal/h 2,394 4,536 3,200 4,536
COOLING W 2,784 5,275 3,721 5,275
CAPACITY Btu/h 9,500 18,000 12,700 18,000
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN MOTOR 4 POLES X 9W 4 POLES X 20W 4 POLES X 13W 4 POLES X 20W
FAN
RATED INPUT POWER W 26 50 29 50
RATED RUNNING CURRENT A 0.11 0.22 0.13 0.22
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
ROW
FIN PER INCH
FACE AREA m
INDOOR UNIT
DIMENSION WIDTH mm/in 899 / 35.4 1062 / 41.8 899 / 35.4 1062 / 41.8
WEIGHT kg 12 16 12 16
SOUND PRESSURE LEVEL ( H/M/L ) dBA 39 / 34 / 28 44 / 40 / 35 42 / 36 / 29 44 / 40 / 35
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in 16 / 0.63 20 / 0.79 16 / 0.63 20 / 0.79
AIR FILTER
PACKING HEIGHT mm/in 337 / 13.3 378 / 14.9 337 / 13.3 378 / 14.9
DIMENSION WIDTH mm/in 957 / 37.7 1130 / 44.5 957 / 37.7 1130 / 44.5
COMPRESSOR TYPE
NUMBER
CAPACITOR µF 30 45 30 45
LOCK ROTOR AMP A 20 56 25 56
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS 1400 / 660.8 2400 / 1132.8 1400 / 660.8 2400 / 1132.8
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA m
OUTDOOR UNIT
DIMENSION WIDTH mm/in 960 / 37.8
WEIGHT kg 95
SOUND PRESSURE LEVEL dBA 59 59 61
CASING THICKNESS mm/in 1.0 - 1.2 / 0.039- 0.047
TYPE
PIPE COIL FAN COMP
SIZE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 1.450
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT AWMS10G AWMS20G AWMS15G AWMS20G AWMS20G AWMS20G
ONE / TWO UNIT
RUNNING
ONE UNIT RUNNING W 1,018 2,076 1,459 2,076 2,076 2,076
TWO UNITS RUNNING W
ONE UNIT RUNNING A 4.47 10.20 6.43 10.20 10.20 10.20
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 510 / 240.72 345 / 162.82 510 / 240.72
MEDIUM CFM/LPS 250 / 117.99 440 / 207.7 285 / 134.51 440 / 207.7
LOW CFM/LPS 200 / 94.39 370 / 174.6 220 / 103.83 370 / 174.6
2
2
HEIGHT mm/in 260 / 10.2 306 / 12.0 260 / 10.2 306 / 12.0
/ft
DEPTH mm/in 198 / 7.8 222 / 8.7 198 / 7.8 222 / 8.7
ROOM TEMPERATURE
OPERATION
DEPTH mm/in 270 / 10.6 292 / 11.5 270 / 10.6 292 / 11.5
2
2
HEIGHT mm/in 631.7 / 24.9
/ft
DEPTH mm/in 437 / 17.2
MATERIAL GALVANISED MILD STEEL
FINISHING EPOXY-POLYESTER POWDER
LIQUID mm/in
GAS mm/in 9.52 / 3/8 15.88 / 5/8 12.70 / 1/2 15.88 / 5/8
DEPTH mm/in
kg 1.100 1.600 1.100 1.600
AMSD1020A AMSD1520A AMSD2020A
4,536
5,275
18,000
3,059
14.4 16.2
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
R 22 / OUTDOOR CAPILLARY TUBE
THERMAL OVERLOAD RELAY
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
3,364
220 ~ 240 / 1 / 50
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516 0.269 / 2.900 0.234 / 2.516 0.269 / 2.900
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
WASHABLE SARANET
ROTARY
2
OVERLOAD PROTECTION
ALUMINIUM ALLOY WITH ELECTRO- DEPOSITED EPOXY & GLASS REINFORCED
PROPELLER/DIRECT
457.2 / 18
0.61
50
137
SEAMLESS COPPER
9.52 / 3/8
0.35 / 0.014
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.586 / 6.31
4,574
21.9
510 / 240.72
440 / 207.7
370 / 174.6
4 POLES X 20W
50
0.22
0.269 / 2.900
306 / 12.0
1062 / 41.8
222 / 8.7
16
44 / 40 / 35
20 / 0.79
378 / 14.9
1130 / 44.5
292 / 11.5
45
56
482.6 / 19
0.93
150
214
2400 / 1132.8
99 106
FLARE VALVE / FITTING
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
15.88 / 5/8
24
Page 26
AMSD SERIES HEAT PUMP UNIT
L
T
A
R
A
R
A
R
R
A
R
Y
Y
V
L
R
T
A
L
R
L
A
E
E
R
R
A
L
R
T
A
L
R
L
L
A
L
G
D
.
:
.
A
R
R
A
R
MODE
NOMINAL kcal/h
COOLING W
CAPACIT
NOMINAL kcal/h
HEATING W
CAPACIT
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT
(COOLING)
RATED RUNNING
CURRENT
(HEATING)
POWER SOURCE
REFRIGERANT / CONTRO
FAN TYPE
AIR FLOW
FAN MOTO
FAN
RATED INPUT POWER W
RATED RUNNING CURREN
FAN MOTOR PROTECTION
TUBE
COIL
FIN
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dB
CONTROL AIR DISCHARG
CONDENSATE DRAIN SIZ
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBE
CAPACITO
COMP
LOCK ROTOR AMP
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIA
DIAMETE
RATED RUNNING CURREN
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
TUBE
COIL
FIN
FACE AREA m2/ft
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVE
CASING
TYPE
SIZE LIQUI
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.900
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION
OUTDOOR UNIT
INDOOR UNI
ONE / TWO UNIT RUNNING
ONE / TWO UNIT RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIA
THICKNESS mm/in
FINISHIN
GAS mm/in
DEPTH mm/in
Btu/h
Btu/h
/Ph/Hz
mm/in
mm/in
µF
mm/in
mm/in
kg
dB
mm/in
kg 0.775 0.900
2
2
MSD1010A
WMS10G
1,000 1,000 1,000 1,240 1,240 1,240
1,160 1,160 1,160 1,358 1,358 1,358
4.50 4.50 4.50 5.59
5.10 5.10 5.10 6.05
WMS10G
2343 / 2293 3024 / 2898
2726 / 2667 3517 / 3370
9300 / 9100 12000 / 11500
2746 / 2696
3195 / 3136 3810 / 3517
10900 / 10700 13000 / 12000
1,860
2,070 2,212 2,458
8.32 9.52
9.14
R22 / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
250 / 117.99
4 POLES X 9W 4 POLES X 13W
26
0.11
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
39 / 34 / 28
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
9.52 / 3/8 12.7 / 1/2
2 x 0.775
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30 30 30
20 25
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
63
MSD1015A
WMS10G
2343 / 2293 3024 / 2898
2726 / 2667 3517 / 3370
9300 / 9100 12000 / 11500
2746 / 2696 3276 / 3024
3195 / 3136 3810 / 3517
10900 / 10700 13000 / 12000
220 ~ 240 / 1 / 50
300 / 141.6 345 / 162.82
250 / 117.99 285 / 134.51
200 / 94.39 220 / 103.83
26 29
0.11 0.13
THERMAL OVERLOAD RELAY
39 / 34 /28 42 / 36 / 29
WASHABLE SARANET
20 25
OVERLOAD PROTECTION
PROPELLER/DIRECT
ALUMINIUM (SLIT FIN TYPE)
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
FLARE VALVE
9.52 / 3/8 12.7 / 1/2
AWMS15GR AWMS15G
2,118 2,480
9.92
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
2
420 / 16.5
0.7
80
170
9.52 / 3/8
0.33 / 0.013
0.12 / 0.005
2
16
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13
64 65
56
0.8 / 0.031
6.35 / 1/4
710 / 28.0
982 / 38.7
461 / 18.1
AMSD1515A
3276 / 3024
5.59 5.59
6.05 6.05
345 / 162.82
285 / 134.51
220 / 103.83200 / 94.39
42 / 36 / 29
11.22
11.08
29
0.13
30
WMS15G
25
Page 27
AMSD SERIES HEAT PUMP UNIT
L
T
R
A
R
Y
Y
V
L
R
T
A
L
R
L
A
E
E
R
R
A
L
R
T
A
L
R
L
L
A
L
G
D
.
:
.
A
R
A
MODE
NOMINAL kcal/h
COOLING W
CAPACIT
NOMINAL kcal/h
HEATING W
CAPACIT
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT (COOLING)
RATED RUNNING
CURRENT (HEATING)
POWER SOURCE
REFRIGERANT / CONTRO
FAN TYPE
AIR FLOW
FAN MOTO
FAN
RATED INPUT POWER W 29 50
RATED RUNNING CURREN
FAN MOTOR PROTECTION
TUBE
COIL
FIN
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dB
CONTROL AIR DISCHARG
CONDENSATE DRAIN SIZ
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBE
CAPACITO
COMPFAN
LOCK ROTOR AMP
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIA
DIAMETE
RATED RUNNING CURREN
RATED OUTPUT POWER W
RATED INPUT POWER W
TUBEFIN
COIL
FACE AREA m2/ft
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVE
CASING
TYPE
SIZE LIQUI
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION
OUTDOOR UNIT
INDOOR UNI
ONE / TWO UNIT RUNNING
ONE / TWO UNIT RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in 270 / 10.6 292 / 11.5
MATERIA
DIAMETE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIA
THICKNESS mm/in
FINISHIN
GAS mm/in 12.70 / 1/2 15.88 / 5/8
DEPTH mm/in
Btu/h
Btu/h
/Ph/Hz
mm/in
2
mm/in
µF 30 45
mm/in
mm/in
2
kg
dB
mm/in
kg 0.925 1.650
AWMS15G
2898 / 2772 4536 / 4536
3370 / 3224 5275 / 5275
11500 / 11000 18000 / 18000
3175 / 3024 5040 / 4914
3693 / 3517 5862 / 5715
12600 / 12000 20000 / 19500
1,345 2,195
1,378 2,412
5.99 11.86
6.19 12.96
R22 / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
345 / 162.82 510 / 240.72
285 / 134.51 440 / 207.7
220 / 103.83 370 / 174.6
4 POLES X 13W 4 POLES X 20W
0.13 0.22
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.234 / 2.516 0.269 / 2.900
260 / 10.2 306 / 12.0
899 / 35.4 1062 / 41.8
198 / 7.8 222 / 8.7
12 16
42 / 36 / 29 44 / 40 / 35
UTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
16 / 0.63 20 / 0.79
337 / 13.3 378 / 14.9
957 / 37.7 1130 / 4.5
25 56
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
MSD1520A
3,460
3,475
17.41
17.61
220 ~ 240 / 1 / 50
THERMAL OVERLOAD RELAY
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
WASHABLE SARANET
ROTARY
2
OVERLOAD PROTECTION
PROPELLER/DIRECT
482.6 / 19
0.92
150
215
9.52 / 3/8
0.33 / 0.013
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960.0 / 37.8
437.0 / 17.2
100
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
61
0.8 / 0.031
FLARE VALVE
6.35 / 1/4
813 / 32.0
1144 / 45.0
611 / 24.1
WMS20G
26
Page 28
A4MSD SERIES COOLING ONLY
MODEL INDOOR UNIT
NOMINAL kcal/h
COOLING W
CAPACITY Btu/h
RATED POWER
CONSUMPTION
RATED RUNNING
CURRENT
POWER SOURCE
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN MOTOR
FAN
RATED INPUT POWER W
RATED RUNNING CURRENT A
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
COMP
LOCK ROTOR AMP A
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
ROW
FIN PER INCH
FACE AREA m
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVEL dBA
CASING
TYPE
SIZE LIQUID mm/in
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT
ONE / TWO UNIT
RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS 300 / 141.6 345 / 162.82
MEDIUM CFM/LPS 250 / 117.99 285 / 134.51
LOW CFM/LPS 200 / 94.39 220 / 103.83
V/Ph/Hz
2
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
2
2
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIAL
THICKNESS mm/in
FINISHING
/ft
kg
GAS mm/in
DEPTH mm/in
kg 0.750 0.800
A4MSD1010A A4MSD1015A A4MSD1515A
AWMS10G AWMS10G AWMS10G AWMS15G AWMS15G AWMS15G
2,268 3,024
2,638 3,517
9,000 12,000
1,035 1,035 1,035 1,566 1,566 1,566
1,900 2,435 2,966
4.40 4.40 4.40 7.00 7.00 7.00
8.10 10.70
300 / 141.6
250 / 117.99
200 / 94.39
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
4 POLES X 9W 4 POLES X 13W
26 29
0.11
2,268 3,024
2,638 3,517
9,000 12,000
220 ~ 240 / 1 / 50
R407C / OUTDOOR CAPILLARY TUBE
26 29
0.11 0.13
THERMAL OVERLOAD RELAY
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
13.34
345 / 162.82
285 / 134.51
220 / 103.83
0.13
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
39 / 34 / 28
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30 30 30
20 32
39 / 34 /28 42 / 36 / 29
MICROCOMPUTER CONTROLLED THERMOSTAT
OVERLOAD PROTECTION
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (SLIT FIN TYPE)
62
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
9.52 / 3/8 12.7 / 1/2
9.52 / 3/8 12.7 / 1/2
2 x 0.750 2 x 0.800
12
16 / 0.63
WASHABLE SARANET
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
2
20 32
PROPELLER/DIRECT
406 / 16
0.72
80
170
9.52 / 3/8
0.33 / 0.013
0.12 / 0.005
2
16
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13
63 64
54
0.8 / 0.031
FLARE VALVE
6.35 / 1/4
710 / 28.0
982 / 38.7
461 / 18.1
42 / 36 / 29
30
27
Page 29
A4MSD SERIES HEAT PUMP UNIT
L
T
A
R
A
R
A
R
R
A
R
Y
Y
V
L
R
T
A
L
R
L
A
E
E
R
R
A
L
R
T
A
L
R
L
L
A
L
G
D
.
:
.
A
R
A
R
R
MODE
NOMINAL kcal/h
COOLING W
CAPACIT
NOMINAL kcal/h
HEATING W
CAPACIT
RATED POWER
CONSUMPTION
(COOLING)
RATED POWER
CONSUMPTION
(HEATING)
RATED RUNNING
CURRENT (COOLING)
RATED RUNNING
CURRENT (HEATING)
POWER SOURCE
REFRIGERANT / CONTRO
FAN TYPE
AIR FLOW
FAN MOTO
FAN
RATED INPUT POWER W
RATED RUNNING CURREN
FAN MOTOR PROTECTION
MATERIA
DIAMETE
TUBE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA m2/ft
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dB
CONTROL AIR DISCHARG
CONDENSATE DRAIN SIZ
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBE
CAPACITO
COMP
LOCK ROTOR AMP
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIA
DIAMETE
RATED RUNNING CURREN
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIA
DIAMETE
TUBE
THICKNESS mm/in
MATERIA
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA m2/ft
OUTDOOR UNIT
DIMENSION
WEIGHT
SOUND PRESSURE LEVE
CASING
TYPE
SIZE LIQUI
PIPE
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE 2 x 0.725 2 x 0.800
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION
OUTDOOR UNIT
INDOOR UNI
ONE / TWO UNIT RUNNING
ONE / TWO UNIT RUNNING
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING W
TWO UNITS RUNNING W
ONE UNIT RUNNING A
TWO UNITS RUNNING A
ONE UNIT RUNNING A
TWO UNITS RUNNING A
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
MATERIA
THICKNESS mm/in
FINISHIN
GAS mm/in
DEPTH mm/in
Btu/h
Btu/h
/Ph/Hz
mm/in
mm/in
µF
mm/in
mm/in
kg
dB
mm/in
kg 0.750 0.800
2
2
4MSD1010A
WMS10G
994 994 994 1466 1466 1466
992 992 992 1476 1476 1476
4.21 4.21 4.21 6.71 6.71 6.71
4.21 4.21 4.21 6.71 6.71 6.71
WMS10G
2268 / 2268 2772 / 2646
2638 / 2268
9000 / 9000 11000 / 11500
2394 / 2668 3024 / 2898
2784 / 2638 3517 / 3370
9500 / 9000 12000 / 11500
1,800
1,690
7.60
7.20
R407C / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
300 / 141.6
250 / 117.99
200 / 94.39
4 POLES X 9W 4 POLES X 13W
26
0.11 0.13
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
39 / 34 / 28
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
9.52 / 3/8
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
30 30 30
20 32
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
4MSD1015A
WMS10G
2268 / 2268 2772 / 2646
2638 / 2638 3224 / 3077
9000 / 9000 11000 / 11500
2394 / 2668 3024 / 2898
2784 / 2638 3517 / 3370
9500 / 9000 12000 / 11500
220 ~ 240 / 1 / 50
300 / 141.6 345 / 162.82
250 / 117.99 285 / 134.51
200 / 94.39 220 / 103.83
26 29
0.11 0.13
THERMAL OVERLOAD RELAY
39 / 34 /28 42 / 36 / 29
WASHABLE SARANET
20 32
OVERLOAD PROTECTION
PROPELLER/DIRECT
ALUMINIUM (SLIT FIN TYPE)
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
FLARE VALVE
9.52 / 3/8 12.7 / 1/2
AWMS15GR AWMS15G
2,044
9.52
9.22
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
2
406 / 16
0.72
80
170
9.52 / 3/8
0.33 / 0.013
0.12 / 0.005
2
16
0.51 / 5.53
646 / 25.4
840 / 33.1
330 / 13
64 6563
54
0.8 / 0.031
6.35 / 1/4
710 / 28.0
982 / 38.7
461 / 18.1
A4MSD1515A
3224 / 3077
345 / 162.82
285 / 134.51
220 / 103.83
42 / 36 / 29
WMS15G
2,4782,139
2,398
11.24
11.04
29
30
12.7 / 1/2
28
Page 30
AMST SERIES COOLING ONLY
MODEL
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION
RATED TOTAL RUNNING CURRENT
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
INPUT POWER W 26 26 29 26 29 29 26 50
RUNNING CURRENT A
FAN MOTOR PROTECTION
TUBEFIN
COILPIPE COMPCOIL
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in 1062 / 41.8
WEIGHT kg 16
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in 378 / 14.9
DIMENSION WIDTH mm/in 1130 / 44.5
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 20 / 26 20 / 26 25 / 33 20 / 26 25 / 33 25 / 33 20 / - 47 / -
INPUT POWER W 823 823 1263 823 1263 1263 823 1971
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
RATED OUTPUT POWER W
RATED INPUT POWER W
AIR FLOW CFM/LPS
TUBEFIN
OUTDOOR UNIT
FACE AREA
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT
INDOOR UNIT
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in 306 / 12.0
DEPTH mm/in 222 / 8.7
ROOM TEMPERATURE
OPERATION
DEPTH mm/in 292 / 11.5
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in
DEPTH mm/in
kcal/h
AMST101010A AMST151515A
3 x AWMS10G 2 x AWMS10G AWMS15G AWMS10G 2 x AWMS15G 3 x AWMS15G 2 x AWMS10G AWMS20G
3 x 2,394 2 x 2,394 3,200 2,394 2 x 3,200 3 x 3,200 2 x 2,394 4,536
W
Btu/h
W 2,685 4,188
A 12.6 18.4
2
m
/ft
2
m
/ft
kg 3 x 0.800 2 x 0.800 0.825 0.800 2 x 0.825 3 x 0.825 3 x 0.650 1.075
3 x 2,784 2 x 2,784 3,721 2,784 2 x 3,721 3 x 3,721 2 x 2,784 5,275
3 x 9,500 2 x 9,500 12,700 9,500 2 x 12,700 3 x 12,700 2 x 9,500 18,000
300 / 141.6 300 / 141.6 345 / 162.82 300 / 141.6 345 / 162.82 345 / 162.82 300 / 141.6 510 / 240.72
250 / 117.99 250 / 117.99 285 / 134.51 250 / 117.99 285 / 134.51 285 / 134.51 250 / 117.99 440 / 207.7
200 / 94.39 200 / 94.39 220 / 103.83 200 / 94.39 220 / 103.83 220 / 103.83 200 / 94.39 370 / 174.6
4 POLES x 9W
0.11 0.11 0.13 0.11 0.13 0.13 0.11 0.22
2
39 / 34 / 28
2
97 109
61 62
9.52 / 3/8 9.52 / 3/8 12.7 / 1/2 9.52 / 3/8 12.7 / 1/2 12.7 / 1/2 9.52 / 3/8 15.88 / 5/8
AMST101015A AMST101515A AMST101020A
3,142 3,665 4,041
14.5 16.3 18.1
220 ~ 240 / 1 / 50
R22 / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
4 POLES x 13W 4 POLES x 9W 4 POLES x 9W 4 POLES x 20W
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
42 / 36 / 29 39 / 34 / 28 42 / 36 / 29 42 / 36 / 29 39 / 34 / 28
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
101 105 104
61 62
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS COPPER SEAMLESS INNER GROOVED COPPER
0.35 / 0.014 0.33 / 0.013
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
0.234 / 2.516
260 / 10.2
899 / 35.4
337 / 13.3
957 / 37.7
270 / 10.6
0.92 / 1.41
EPOXY POLYESTER POWDER
18
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
ROTARY
3
30 / 30
OVERLOAD PROTECTION
PROPELLER / DIRECT
486.2 / 19
150 / 166
215 / 291
2400 / 1133
0.95 / 3/8
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960 / 37.8
437 / 17.2
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
FLARE VALVE
6.35 / 1/4
824 / 32.4
1,194 / 47.0
611 / 24.1
4 POLES x 13W
61
0.269 / 2.900
44 / 40 /35
20 / 0.79
40 / -
0.92 / -
150 / -
215 / -
29
Page 31
AMST SERIES COOLING ONLY
MODEL
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION W
RATED TOTAL RUNNING CURRENT A
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
FAN TYPE
AIR FLOW
FAN
FAN MOTOR
INPUT POWER W 26 69 26 29 69 29 69
RUNNING CURRENT A
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
COIL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in 16 / 0.63 20 / 0.79 20 / 0.79 16 / 0.63 20 / 0.79
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 20 / 20 62 20 25 62 25 / 25 62
INPUT POWER W 823 2430 823 1250 2430 1250 2430
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
FAN COMP
RATED RUNNING CURRENT A
RATED OUTPUT POWER W
RATED INPUT POWER W
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
FACE AREA
OUTDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in 6.35 / 1/4 9.52 / 3/8 6.35 / 1/4 6.35 / 1/4 9.52 / 3/8 6.35 / 1/4 9.52 / 3/8
PIPE COIL
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT
INDOOR UNIT
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in 9.52 / 3/8 15.88 / 5/8 9.52 / 3/8 12.7 / 1/2 15.88 / 5/8 12.7 / 1/2 15.88 / 5/8
DEPTH mm/in
kcal/h
W
Btu/h
2
/ft20.234 / 2.516 0.269 / 2.900 0.269 / 2.900 0.234 / 2.516 0.269 / 2.900
m
2
2
/ft
m
kg 2 x 0.740 1.440 0.740 0.870 1.440 2 x 0.870 1.440
AMST101025A
2 x AWMS10G AWMS25G AWMS10G AWMS15G AWMS25G 2 x AWMS15G AWMS25G
2 x 2,394 5,796 2,394 3,024 5,796 2 x 3024 5,796
2 x 2,784 6,741 2,784 3,517 6,741 2 x 3517 6,741
2 x 9,500 23,000 9,500 12,000 23,000 2 x 12000 23,000
4,280 4,790 5,300
20.2
300 / 141.6 650 / 306.77 300 / 141.6 345 / 162.82 650 / 306.77 345 / 162.82 650 / 306.77
250 / 117.99
200 / 94.39
4 POLES x 9W
0.11
260 / 10.2 306 / 12.04 306 / 12.04 260 / 10.2 306 / 12.04
899 / 35.4 1062 / 41.79 1062 / 41.79 899 / 35.4 1062 / 41.79
198 / 7.8 222 / 8.74 222 / 8.74 198 / 7.8 222 / 8.74
12 16 16 12
39 / 34 / 28 49 / 43 / 40 39 / 34 / 28 42 / 36 / 29 49 / 43 / 40 42 / 36 / 29 49 / 43 / 40
337 / 13.3 378 / 14.9 337 / 13.3 337 / 13.3 378 / 14.9 337 / 13.3 378 / 14.9
957 / 37.7 1130 / 44.5 957 / 37.7 957 / 37.7 1130 / 44.5 957 / 37.7 1130 / 44.5
270 / 10.6 292 / 11.5 270 / 10.6 270 / 10.6 292 / 11.5 270 / 10.6 292 / 11.5
30 / 30 45
117
500 / 235.97
450 / 212.38
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
250 / 117.99 285 / 134.51
200 / 94.39 220 / 103.83
4P x 25W
0.29
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
4 POLES x 9W
0.11 0.13
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
AMST101525A AMST151525A
22.7 25.1
220 ~ 240 / 1 / 50
R22 / OUTDOOR CAPILLARY TUBE
500 / 235.97
4P x 13W 4P x 25W 4P x 13W 4P x 25W
THERMAL OVERLOAD
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
30 30 45
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
0.234 / 2.516
EPOXY POLYESTER POWDER
18
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
ROTARY
3
OVERLOAD PROTECTION
PROPELLER / DIRECT
610 / 24
1.1
145
241
SEAMLESS COPPER
9.52 / 3/8
0.35 / 0.014
ALUMINIUM (SLIT FIN TYPE)
0.127 / 0.005
2
16
0.87 / 9.33
850 / 33.46
1030 / 40.55
400 / 15.75
120 123
57
GALVANISED MILD STEEL
0.8 / 0.031
FLARE VALVE
1000 / 39.37
1200 / 47.24
560 / 22.05
450 / 212.38
0.29
285 / 134.51
220 / 103.83
0.13
30 / 30 45
500 / 235.97
450 / 212.38
0.29
16
30
Page 32
A4MST SERIES COOLING ONLY
2
/
2
2
/
2
MODEL OUTDOOR UNIT A4MST101010A A4MST151515A
NOMINAL
COOLING
CAPACITY
RATED TOTAL POWER CONSUMPTION W 2580 4161
RATED TOTAL RUNNING CURRENT A 11.1 19.0
POWER SOURCE V/Ph/Hz
REFRIGERANT / CONTROL
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
FAN TYPE
AIR FLOW
FAN
FAN MOTOR 4P x 9W 4P x 9W 4P x 13W 4P x 9W 4P x 13W 4P x 13W
INPUT POWER W 26 26 29 26 29 29
RUNNING CURRENT A 0.11 0.11 0.13 0.11 0.13 0.13
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBE
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
FIN
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 39 / 34 / 28 39 / 34 / 28 42 / 36 / 29 39 / 34 / 28 42 / 36 / 29 42 / 36 / 29
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A 20 20 25 20 25 25
COMP
INPUT POWER W 758 758 1282 758 1282 1282
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
FAN
MOTOR OUTPUT W
RATED INPUT POWER W
AIR FLOW CFM/LPS
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
ROW
OUTDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg 97 109
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE kg 3 x 0.750 2 x 0.750 0.775 0.750 2 x 0.775 3 x 0.775
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
FIN PER INCH
FACE AREA
TYPE
SIZE LIQUID mm/in
PIPE
INDOOR UNIT 3 x AWMS10G 2 x AWMS10G AWMS15G AWMS10G 2 x AWMS15G 3 x AWMS15G
HIGH CFM/LPS 300 / 141.6 300 / 141.6 345 / 162.82 300 / 141.6 345 / 162.82 345 / 162.82
MEDIUM CFM/LPS 250 / 117.99 250 / 117.99 285 / 134.51 250 / 117.99 285 / 134.51 285 / 134.51
LOW CFM/LPS 200 / 94.39 200 / 94.39 220 / 103.83 200 / 94.39 220 / 103.83 220 / 103.83
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in 9.52 / 3/8 9.52 / 3/8 12.7 / 1/2 9.52 / 3/8 12.7 / 1/2 12.7 / 1/2
DEPTH mm/in
kcal/h 3 x 2268 2 x 2268 3024 2268 2 x 3024 3 x 3024
W 3 X 2638 2 X 2638 3517 2638 2 x 3517 3 x 3517
Btu/h 3 X 9000 2 X 9000 12000 9000 2 x 12000 3 x 12000
m
ft
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
m
ft
A4MST101015A A4MST101515A
3107
13.8 16.5
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN / DIRECT
SEAMLESS INNER GROOVED COPPER
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
101 105
220 ~ 240/1/50
R407C / OUTDOOR CAPILLARY TUBE
THERMAL OVERLOAD
7.0 / 0.276
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
3
30
OVERLOAD PROTECTION
PROPELLER / DIRECT
486.2 / 19
0.98
150
228
2400 / 1133
SEAMLESS COPPER
9.52 / 3/8
0.35 / 0.014
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
3
14
0.50 / 5.39
631.7/24.9
960 / 37.8
437 / 17.2
65
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY-POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
3634
31
Page 33
A4MST-AR SERIES HEATPUMP
2
/
2
2
/
2
MODEL OUTDOOR UNIT A4MST101010AR A4MST151515AR
NOMINAL kcal/h 3 x 2268 2 x 2268 3024 2268 2 x 3024 3 x 3024
COOLING W 3 x 2638 2 x 2638 3517 2638 2 x 3517 3 x 3517
CAPACITY Btu/h 3 x 9000 2 x 9000 12000 9000 2 x 12000 3 x 12000
NOMINAL kcal/h 3 x 2268 2 x 2268 2772 2268 2 x 2772 3 x 2772
HEATING W 3 x 2638 2 x 2638 3224 2638 2 x 3224 3 x 3224
CAPACITY Btu/h 3 x 9000 2 x 9000 11000 9000 2 x 11000 3 x 11000
RATED TOTAL POWER CONSUMPTION (COOLING) W 2691 3825
RATED TOTAL POWER CONSUMPTION (HEATING) W 2439 3441
RATED TOTAL RUNNING CURRENT (COOLING) A 11.7 17.7
RATED TOTAL RUNNING CURRENT (HEATING) A 10.6 17.1
POWER SOURCE V/Ph/Hz
REFRIGERANT
FAN TYPE
AIR FLOW
FAN
FAN MOTOR 4P x 9W 4P x 9W 4P x 13W 4P x 9W 4P x 13W 4P x 13W
INPUT POWER W 26 26 29 26 29 29
RUNNING CURRENT A 0.11 0.11 0.13 0.11 0.13 0.13
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
COIL
ROW
FIN PER INCH
FACE AREA
INDOOR UNIT
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL ( H/M/L ) dBA 39 / 34 / 28 39 / 34 / 28 42 / 36 / 29 39 / 34 / 28 42 / 36 / 29 42 / 36 / 29
CONTROL AIR DISCHARGE
CONDENSATE DRAIN SIZE mm/in
AIR FILTER
OPTIONAL AIR FILTER
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF
LOCK ROTOR AMP A
COMPFANCOILPIPE
INPUT POWER W
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in
RATED RUNNING CURRENT A
MOTOR OUTPUT W
RATED INPUT POWER W
AIR FLOW CFM/LPS
MATERIAL
DIAMETER mm/in
TUBEFIN
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
ROW
FIN PER INCH
OUTDOOR UNIT
FACE AREA
DIMENSION WIDTH mm/in
WEIGHT kg
SOUND PRESSURE LEVEL dBA
CASING THICKNESS mm/in
TYPE
SIZE LIQUID mm/in
PACKING HEIGHT mm/in
DIMENSION WIDTH mm/in
REFRIGERANT CHARGE kg 3 x 0.885 2 x 0.885 0.965 0.885 2 x 0.965 3 x 0.965
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
b) HEATING - 21.1°C DB / 15.6°C WB INDOOR AND 8.3°C DB / 6.1°C WB OUTDOOR
26.7°C DB / 19.4°C WB INDOOR AND 46.1°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
INDOOR UNIT 3 x AWMS10GR 2 x AWMS10GR AWMS15GR AWMS10GR 2 x AWMS15GR 3 x AWMS15GR
HIGH CFM/LPS
MEDIUM CFM/LPS
LOW CFM/LPS
HEIGHT mm/in
DEPTH mm/in
ROOM TEMPERATURE
OPERATION
DEPTH mm/in
HEIGHT mm/in
DEPTH mm/in
MATERIAL
FINISHING
GAS mm/in
DEPTH mm/in
m
m
300 / 141.6 300 / 141.6 345 / 162.82 300 / 141.6 345 / 162.82 345 / 162.82
250 / 117.99 250 / 117.99 285 / 134.51 250 / 117.99 285 / 134.51 285 / 134.51
200 / 94.39 200 / 94.39 220 / 103.83 200 / 94.39 220 / 103.83 220 / 103.83
ft
20 20 32 20 32 32
795 / 711 795 / 711 1170 / 1042 795 / 711 1170 / 1042 1170 / 1042
ft
97 109
9.52 / 3/8 9.52 / 3/8 12.7 / 1/2 9.52 / 3/8 12.7 / 1/2 12.7 / 1/2
A4MST101015AR A4MST101515AR
3069 3447
2773 3107
13.7 15.7
12.9
220 ~ 240 / 1 / 50
R407C / OUTDOOR CAPILLARY TUBE
ANTI FUNGUS CROSS FLOW FAN
BUILT IN THERMAL OVERLOAD
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC SLIT FIN)
MICROCOMPUTER CONTROLLED THERMOSTAT
AUTOMATIC LOUVER (UP & DOWN) & GRILLE (LEFT & RIGHT)
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
DUAL ACTION ELECTROSTATIC AIR PURIFYING AND DEODORIZING FILTER
GLASS REINFORCED ACRLY STYRENE RESIN
SEAMLESS INNER GROOVED COPPER
ALUMINIUM (HYDROPHILIC CORR. FIN)
101 105
7.0 / 0.276
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
3
30
OVERLOAD PROTECTION
PROPELLER / DIRECT
486.2 / 19
0.98
150
228
2400 / 1133
0.95 / 3/8
0.33 / 0.013
0.12 / 0.005
3
14
0.50 / 5.39
631.7 / 24.9
960 / 37.8
437 / 17.2
66
GALVANISED MILD STEEL
1.0 - 1.2 / 0.039 - 0.047
EPOXY POLYESTER POWDER
FLARE VALVE
6.35 / 1/4
824 / 32.4
1194 / 47.0
611 / 24.1
15.0
32
Page 34
AMSH SERIES - COOLING ONLY
/
(
/
)
MODELS
POWER SOURCE V/Ph/Hz
REFRIGERANT
FANCOIL
DIMENSION
INDOOR UNIT
WEIGHT
SOUND LEVEL - H / M / L dBA
CONTROL
CONDENSATE DRAIN SIZE mm/in
AIR FILTER *
PACKING
DIMENSION
COMP
FAN
COIL
DIMENSION
OUTDOOR UNIT
DIMENSION
WEIGHT kg 62 63 64 35
CASING MATERIAL
NOISE LEVEL dBA 50
PIPE
PACKING
DIMENSION
1) ALL SPECIFICATIONS ARE SUBJECTED TO CHANGE BY THE MANUFACTURER WITHOUT PRIOR NOTICE.
2) ALL UNITS ARE BEING TESTED AND COMPLY TO ARI 210/240-94
3) NOMINAL COOLING AND HEATING CAPACITY ARE BASED ON THE CONDITIONS BELOW:
a) COOLING - 26.7°C DB / 19.4°C WB INDOOR AND 35°C DB OUTDOOR
4) SOUND PRESSURE LEVEL IS ACCORDING TO JIS B 8615 STANDARD.
POSITION OF THE MEASUREMENT POINT IS 1.0 m IN FRONT AND 1.0 m BELOW THE UNIT.
5) ALL SPECIFICATIONS ARE TENTATIVE SPECIFICATIONS AT THE TIME OF PRINTING. PLEASE CONSULT YOUR DEALER FOR CONFIRMATION.
OUTDOOR UNIT AMSH8K8A AMSH8K66A AMSH66K66A AMSH K77A
INDOOR UNIT AWMS10G (X2) AWMS10G (X3) AWMS10G (X4) AWMS10G (X4) AWMS15G AWMS15G X 2
FAN TYPE
AIR FLOW CFM/LPS
FAN MOTOR
RATED INPUT POWER W
RATED RUNNING CURRENT A
FAN MOTOR PROTECTION
MATERIAL
DIAMETER mm/in
THICKNESS mm/in
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH
FACE AREA
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
ROOM TEMPERATURE
AIR DISCHARGE
OPERATION
HEIGHT mm/in
WIDTH mm/in
DEPTH mm/in
COMPRESSOR TYPE
NUMBER
CAPACITOR µF 30
LOCK ROTOR AMP A 25
PROTECTION DEVICE
FAN TYPE / DRIVE
BLADE MATERIAL
DIAMETER mm/in 355 /14
RATED RUNNING CURRENT A 0.28
RATED OUTPUT POWER W 30
RATED INPUT POWER W 62
MATERIAL SEAMLESS COPPER
DIAMETER mm/in
THICKNESS mm/in 0.35 / 0.014
TUBE TUBE
MATERIAL
THICKNESS mm/in
FIN
ROW
FIN PER INCH 14 19
FACE AREA
TYPE
PIPE SIZE
2
2
m
ft
HEIGHT (mm/in) 494 / 19.4
WIDTH (mm/in) 740 / 29.1
DEPTH (mm/in) 270 / 10.6
HEIGHT mm/in 558 / 22.0
WIDTH mm/in 851 / 33.5
DEPTH mm/in 401 / 15.8
THICKNESS mm/in
FINISH
LIQIUD mm/in
GAS mm/in
HEIGHT mm/in 558 / 2.0
WIDTH mm/in 851 / 33.5
DEPTH mm/in 401 / 15.8
2
2
m
ft
kg
AUTOMATIC LOUVER (UP & DOWN) & MANUAL ADJUST GRILLE (LEFT & RIGHT)
15 / 15 21/ 21
kg 2 x 0.675 0.925 / 0.625 2 x 0.825 0.825
ANTI FUNGUS CROSS FLOW TANGENTIAL FAN/DIRECT
26
0.11
SEAMLESS INNER GROOVED COPPER
39 / 34 / 28 42 / 36 / 29
MICROCOMPUTER CONTROLLED THERMOSTAT
LCD WIRELESS MICRO COMPUTER REMOTE CONTROL
GLASS REINFORCED ACRLY STYRENE RESIN
9.52 / 3/8 12.7 / 1/2
220 ~ 240 / 1 / 50
R 22 / OUTDOOR CAPILLARY TUBE
BUILT IN THERMAL OVERLOAD
7.0 / 0.276
ALUMINIUM (HYDROPHILIC SLIT FIN)
0.51 / 5.53
0.28 / 0.011
0.11 / 0.0043
2
18
0.234 / 2.516
260 / 10.2
899 / 35.4
198 / 7.8
12
16 / 0.63
WASHABLE SARANET
337 / 13.3
957 / 37.7
270 / 10.6
ROTARY
2
25 / 25
OVERLOAD PROTECTION
PROPELLER/DIRECT
420 / 16.5
0.7
80
170
SEAMLESS INNER GROOVED COPPER
9.52 / 3/8
ALUMINIUM (SLIT FIN TYPE)
0.12 / 0.005
2
646 / 25.4
840 / 33.1
330 / 13
646 / 25.4
840 / 33.1
330 / 13.0
GALVANISED MILD STEEL
EPOXY-POLYESTER POWDER
56
710 / 28.0
982 / 38.7
461 / 18.1
16
0.8 / 0.031
FLARE VALVE
6.35 / 1/4
0.33 / 0.013
AMSH 66K555A
65
0.925 / 0.875REFRIGERANT CHARGE
345 / 163300 / 142
4 POLES x 13W4 POLES x 9W
29
0.13
1
1
0.32 / 3.50
33
Page 35
COOLING CAPACITY
AMSH SERIES - COOLING ONLY
MODEL OUTDOOR UNIT
INDOOR UNIT
NOMINAL NUMBER OF UNIT ONE UNIT RUNNING TWO UNITS RUNNING
COOLING OPERATING A OR B A + B
CAPACITY kcal/h 3100 1840 + 1840
W 3605 2140 + 2140
Btu/h 12300 7300 + 7300
POWER CONSUMPTION (W) 1377 1413
RUNNING CURRENT (A) 6 6.5
AMSHK77A
INDOOR A,B : AWMS15F X 2
AMSH8K8A
INDOOR UNIT A, B : AWMS10G X 2
ONE UNIT RUNNING
A OR B A + B
2091
2433
8300
825
3.6
TWO UNITS RUNNING
2091 + 2091
2433 + 2433
8300 + 8300
1494
6.3
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING A1 OR A2 B A1+A2 A1+B, OR A2+B
CAPACITY kcal/h 2520 2041 1613 + 1613 2520 + 2041
POWER CONSUMPTION (W) 1149 834 1244 1839
RUNNING CURRENT (A) 5.0 3.6 5.3 7.9
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING A1+A2, OR B1+B2 A1+B1, OR A2+B2
CAPACITY kcal/h 1613 + 1613 2520 + 2520
POWER CONSUMPTION (W) 1246 2186
RUNNING CURRENT (A) 5.4 9.6
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 2520 3024 1613 X 2 1512 + 1764 2520 X 2 2520 + 3024
POWER CONSUMPTION (W) 1206 1266 1286 1304 2242 2232
RUNNING CURRENT (A) 5.3 5.5 5.6 5.7 9.9 10.1
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 1134 X 3 1613 X 2 + 2520 1613 X 2 + 3024 2520 + 1512 +1764
POWER CONSUMPTION (W) 1329 2322 2382 2340
RUNNING CURRENT (A) 5.8 10.2 10.4 10.3
MODEL OUTDOOR UNIT
NOMINAL NUMBER OF UNIT
COOLING OPERATING
CAPACITY kcal/h 1134 X 3 + 2520 1134 X 3 + 3024 1613 X 2 + 1512 + 1764
POWER CONSUMPTION (W) 2365 2425 2420
RUNNING CURRENT (A) 10.4 10.5 10.6
INDOOR UNIT
W 2931 2374 1876 + 1876 2931 + 2374
Btu/h 10000 8100 6400 + 6400 10000 + 8100
INDOOR UNIT
W 1876 + 1876 2931 + 2931
Btu/h 6400 + 6400 10000 + 10000
INDOOR UNIT
W 2931 3517 1876 X 2 1578 + 2052 2931 X 2 2931 + 3517
Btu/h 10000 12000 6400 X 2 6000 + 7000 10000 X 2 10000 + 12000
INDOOR UNIT
W 1319 X 3 1876 X 2 + 2931 1876 X 2 +3517 2931 + 1758 + 2052
Btu/h 4500 X 3 6400 X 2 + 10000 6400 X 2 + 10000 10000 + 6000 + 7000
INDOOR UNIT
A1 + A2 + A3 + B1 A1 + A2 + A3 + B2 A1 + A2 + B1 + B2
W 1319 X 3 + 2931 1319 X 3 + 3517 1876 X 2 + 1758 + 2052
Btu/h 4500 X 3 + 10000 4500 X 3 + 12000 6400 X 2 + 6000 + 7000
ONE UNIT RUNNING TWO UNITS RUNNING
ONE UNIT RUNNING TWO UNITS RUNNING FOUR UNITS RUNNING
A1, A2, B1, OR B2 A1+A2+B1+B2
2520 4 X 1613
2931 4 X 1876
10000 4 X 6400
1163 2351
5.1 10.2
ONE UNIT RUNNING
A1,A2,A3, OR B1 B2
INDOOR UNIT A1, A2,A3, B1 : AWMS10G X 4, B2 : AWMS15G
THREE UNIT RUNNING
A1 + A2 +A3 A1 + A2 + B1 A1 + A2 + B2 A1 + B1 + B2
INDOOR UNIT A1, A2,A3, B1 : AWMS10G X 4, B2 : AWMS15G
FOUR UNITS RUNNING FIVE UNITS RUNNING
INDOOR UNIT A1, A2, B : AWMS10G X 2
INDOOR UNIT A1, A2, B1, B2 : AWMS10G X 2
INDOOR UNIT A1, A2,A3, B1 : AWMS10G X 4, B2 : AWMS15G
A1+A2,A2+A3, OR A3+A1
AMSH66K555A
AMSH8K66A
THREE UNITS RUNNING
A1+A2+B
1613 + 1613 + 2041
1876 + 1876 +2374
6400 + 6400 + 8100
1937
8.2
AMSH66K66A
AMSH66K555A
TWO UNITS RUNNING
B1+B2 (A1,A2, OR A3) + B1 (A1,A2, OR A3) + B2
AMSH66K555A
A1 + A2 + A3 + B1 + B2
1134 X 3 + 1512 + 1764
1319 X 3 + 1758 + 2052
4500 X 3 + 6000 + 7000
2464
10.8
34
Page 36
OUTDOOR UNIT
5. OUTLINES AND DIMENSIONS
MODEL : AMSD 1010 / 1015 / 1515 A/AR
AMSD 1520 AR
A4MSD 1010 / 1015 / 1515 A/AR
Note : Dimension in mm
MODEL : AMSD 1020 / 1520 A
Note : Dimension in mm
35
Page 37
MODEL : AMSD 2020A
Note : Dimension in mm
MODEL : AMST 101010 / 101015 / 101515 / 151515 / 101020 A
A4MST 101010 / 101015 / 101515 / 151515 A/AR
A
Note : Dimension in mm
NOTE:
A
36
Page 38
MODEL : AMST 101025 / 101525 / 151525 A
Note : Dimension in mm
MODEL : AMSH 8K8 A
Note : Dimension in mm
37
Page 39
MODEL : AMSH 8K66 A
Note : Dimension in mm
NOTE:
A = 94.25
B = 84.0
B
B
B
B
A
MODEL : AMSH 66K66 A
Note : Dimension in mm
NOTE:
A = 94.25
B = 84.0
B
B
B
B
B
B
A
38
Page 40
MODEL : AMSH 66K555 A
Note : Dimension in mm
NOTE:
A = 56.5
B = 89.0
C = 65.0
C
CC
C
A
C
CC
C
B
MODEL : AMSH K77 A
Note : Dimension in mm
39
Page 41
INDOOR UNIT
MODEL: AWMS 10/15 F/FR
INDOOR UNIT
MODEL : AWMS 20 F/FR
Note : Dimension in mm
40
Note : Dimension in mm
Page 42
INDOOR UNIT
MODEL: AWMS 10/15 G/GR
INDOOR UNIT
MODEL : AWMS 20 G/GR
Note : Dimension in mm
41
Note : Dimension in mm
Page 43
OUTDOOR UNIT – COOLING ONLY
6. WIRING DIAGRAMS
MODEL : AMSD/A4MSD 1010A/ 1015A/ 1515A
MODEL : AMSD 1020A/ 1520A
MODEL : AMSD 2020A
42
Page 44
OUTDOOR UNIT – COOLING ONLY
MODEL : AMST/A4MST 101010A/ 101015A/ 101515A/ 151515A
MODEL : AMST 101020A
43
Page 45
OUTDOOR UNIT – COOLING ONLY
MODEL : AMST 101025/ 101525/ 151525 A
44
Page 46
OUTDOOR UNIT – COOLING ONLY
MODEL : AMSH8K8A
MODEL : AMSH8K66A
MODEL : AMSH66K66A
45
Page 47
OUTDOOR UNIT – COOLING ONLY
MODEL : AMSH66K555A
MODEL : AMSHK77A
46
Page 48
OUTDOOR UNIT – HEATPUMP
MODEL : AMSD/A4MSD 1010 / 1015 / 1515 AR
MODEL : AMSD 1520AR
47
Page 49
OUTDOOR UNIT – HEATPUMP
MODEL : A4MST 101010 / 101015 / 101515 / 151515AR
48
Page 50
INDOOR UNIT
COOLING ONLY
MODEL : AWMS 10F/ 15F/ 20F (AUTO RANDOM RESTART)
HEATPUMP UNIT
MODEL : AWMS 10FR/ 15FR/ 20FR
HEATPUMP UNIT
MODEL : AWMS 10FR/ 15FR/ 20FR (AUTO RANDOM RESTART)
49
Page 51
INDOOR UNIT
COOLING ONLY
MODEL : AWMS 10/15G (IONIZER)
MODEL : AWMS 10/15G (NTP)
TO OUTDOOR UNIT
TO OUTDOOR UNIT
50
Page 52
MODEL : AMSD 1010/ 1015/ 1515/ 1020/ 1520/ 2020 A
7. REFRIGERANT CIRCUIT DIAGRAM
A4MSD 1010/ 1015/ 1515 A
MODEL : AMST/A4MST 101010/ 101015/ 101515/ 151515 A
AMST 101020/ 101025/ 101525/ 151525 A
51
Page 53
MODEL : AMSHK77A
MODEL : AMSH8K8A
52
Page 54
MODEL : AMSH8K66A
MODEL : AMSH66K66A
53
Page 55
MODEL : AMSH66K555A
54
Page 56
MODEL :
AMSD/A4MSD 1010/ 1015/ 1515 AR
AMSD 1520 AR
MODEL : A4MST 101010/ 101015/ 101515/ 151515 AR
55
Page 57
SPECIAL PRECAUTIONS WHEN DEALING WITH REFRIGERANT R407C UNIT
8. SPECIAL PRECAUTIONS FOR R407C
1) WHAT IS NEW REFRIGERANT R407C?
R407C is a zeotropic refrigerant mixture which has Zero Ozone Depletion Potential (ODP = 0) and thus, conforms
to the Montreal Protocol regulation. It requires Polyol-ester (POE) oil for its compressor's lubricant. Its refrigerant
capacity and performance are about the same as the refrigerant R22.
2) COMPONENTS
Mixture of composition by weight: R32(23%), R125(25%), R134a(52%)
3) CHARACTERISTIC
• R407C liquid and vapor components have different compositions when the fluid evaporates or condenses. Hence,
when a leak occurs and only vapor leaks out, the composition of the refrigerant mixture left in the system will
change and subsequently affect the system performance. DO NOT add new refrigerant to a leaked
system. It is recommended that the system should be evacuated thoroughly before recharging with R407C.
• When refrigerant R407C is used, the composition will differ depending on whether it is in gaseous or liquid phase.
Hence when charging R407C, ensure that only liquid is being withdrawn from the cylinder or can. This is to make
certain that only original composition of R407C is being charged into the system.
• POE oil is used as lubricant for R407C compressor, which is different from the mineral oil used for R22 compressor.
Extra precaution must be taken to avoid exposing the R407C system to moist air.
4) CHECK LIST BEFORE INSTALLATION/SERVICING
• Tubing
Refrigerant R407C is more easily affected by dust or moisture compared with R22, make sure to temporarily cover
the ends of the tubing prior to installation
• Compressor oil
No additional charge of compressor oil is permitted.
• Refrigerant
No other refrigerant other than R407C
• Tools
Tools specifically for R407C only (must not be used for R22 or other refrigerant)
i) Gauge manifold and charging hose
ii) Gas leak detector
iii) Refrigerant cylinder/charging cylinder
iv) Vacuum pump c/w adapter
v) Flare tools
vi) Refrigerant recovery machine
5) HANDLING AND INSTALLATION GUIDELINES
Like R22 systems, the handling and installation of R407C systems are closely similar. All precautionary measures; such
as ensuring no moisture, no dirt or chips in the system, clean brazing using nitrogen, and thorough leak check
and vacuuming are equally important requirements. However, due to the zeotropic nature of R407C and its hydroscopic
POE OIL, additional precautions must be taken to ensure optimum and trouble-free system operation.
a) Filter-dryer must be installed along the liquid line for all R407C air conditioners. This is to minimise the
contamination of moisture and dirt in the refrigerant system. Filter-dryer must be of molecular sieve type. For a
heat-pump system, install a two-way flow filter dryer along the liquid line.
b) During installation or servicing, avoid prolong exposure of the internal part of the refrigerant system to moist air.
Residual POE oil in the piping and components can absorb moisture from the air.
56
Page 58
c) Ensure that the compressor is not exposed to air for more than the recommended time specified by its
Dip-pipe
Invert cylinder
Liquid
withdrawal
manufacturer (typically less than 10 minutes). Removed the seal-plugs only when the compressor is
about to be brazed.
d) The system should be thoroughly vacuumed to 1.0 Pa (-700mmHg) or lower. This vacuuming level is
more stringent than R22 system so as to ensure no incompressible gas and moisture in the system.
e) When charging R407C, ensure that only liquid is being withdrawn from the cylinder or can. This is to
ensure that only the original composition of R407C is being delivered into the system. The liquid
composition can be different from the vapor composition.
R32/R125/R134
33% / 33% / 34%
23% / 25% / 52%
Composition of R407C in vapour phase
is different from liquid phase.
f) Normally, the R407C cylinder or can is equipped with a dip-pipe for liquid withdrawal. However, if the
dip-pipe is not available, invert the cylinder or can to withdraw liquid from the valve at the bottom.
without dip-pipe
g) When servicing leaks, the top-up method commonly practiced for R22 systems is not recommended for
R407C system. Unlike R22 where the refrigerant is of a single component, the composition of R407C
(which is made-up of three different components) may have changed during the leak. Consequently,
a top-up may not ensure that the R407C in the system is of the original composition. This composition
shift may adversely affect the system performance. It is recommended that the system be evacuated
thoroughly before recharging with R407C.
57
Page 59
LOCATION FOR INSTALLATION OF THE CONDENSING UNITS
9. INSTALLATION
As condensing temperature rises, evaporating temperature rises and cooling capacity drops. In order to achieve
maximum cooling capacity, the location selected for outdoor unit should fulfill the following requirements :
· Install the condensing (outdoor) unit in a way such that hot air distributed by the outdoor condensing unit cannot be
drawn in again (as in the case of short circuit of hot discharge air). Allow sufficient space for maintenance around the
unit.
· Ensure that there is no obstruction of air flow into or out of the unit. Remove obstacles which block air intake or
discharge.
· The location must be well ventilated, so that the unit can draw in and distribute plenty of air thus lowering the
condensing temperature.
· A place capable of bearing the weight of the outdoor unit and isolating noise and vibration.
· A place protected from direct sunlight. Otherwise use an awning for protection, if necessary.
· The location must not be susceptible to dust or oil mist.
CAUTION : If the condensing unit is operated in an atmosphere containing oils(including machine oils),
salt(coastal area), sulphide gas(near hot spring, oil refinery plant), such substances may lead to
failure of the unit.
58
Page 60
INSTALLATION IN ZONE EXPOSED TO STRONG WIND OR HIGH SNOW FALLS (FOR HEATPUMP
MODEL)
INSTALLATION CLEARANCE
SINGLE CONDENSING UNIT INSTALLATION
Outdoor units must be installed such that there is no short circuit of the hot discharge air or obstruction to smooth air
flow. Select the coolest possible place where intake air should not be hotter than the outside temperature (max. 45 °C).
All Models A B C D
Minimum Distance 300 mm 1000 mm 300mm 500mm
NOTE :- (1) If any obstacle is higher than 2m, or if there is any obstruction at the upper part of the unit, allow more
space than indicated in the table above.
59
Page 61
MAXIMUM PIPE LENGTH AND MAXIMUM NUMBER OF BENDS
When the pipe length becomes too long, both the capacity and reliability drop. As the number of bends increases,
system piping resistance to the refrigerant flow increases, lowering the cooling capacity. As a result of this, the
compressor may become defective. Always choose the shortest path and follow the recommendations as tabulated
below :
MODEL
DATA
Max. Length (L) m 12 / 12 12 / 15 15 / 15
Max. elevation (H) m 5 / 5 5 / 8 8 / 8
Max. No. of Bends 10 / 10 10 / 10 10 / 10
MODEL
DATA
Max. Length (L) m 12 / 12 / 12 12 / 12 / 15
Max. elevation (H) m 5 / 5 / 5 5 / 5 / 8
Max. No. of Bends 10 / 10 / 10 10 / 10 / 10
Model Circuitry Max.
AMSH8K8A COMP. A 12 - - 5 - 10
AMSH8K66A COMP. A 12 / 12 20 8 5 7 10
AMSH66K66A COMP. A 12 / 12 20 8 5 7 10
AMSH66K555A COMP. A 12 / 12 20 8 5 7 10
1010A – 1515A 1020A – 1520A 2020A
AMST / A4MST AMST
101010A – 151515A/AR 101020A
Individual
L1 or L2 (m)
COMP. B 12 - - 5 - 10
COMP. B 12 - - 5 - 10
COMP. B 12 / 12 20 8 5 7 10
COMP. B 12 / 12 20 8 5 7 10
AMSD / A4MSD
*Max. Total
L1 + L2 (m)
101025A – 151525A
12 / 12 / 15
5 / 5 / 8
10 / 10 / 10
*Max. Length
Difference
L1 – L2 (m)
Max.
Elevation
H (m)
*Max. Height
Difference
DH(m)
*Max.
Number of
bends
* For units sharing the same compressor only.
CAUTION :
· Our guarantee on the performance of our air-conditioners will be revoked if the height, length and/or the number of
bends of the refrigerant piping system installed is beyond our recommended limit.
· Bendings must be carefully made so as not to crush the pipe. Use a pipe bender to bend a pipe as far as possible.
1) AMSD / A4MSD
60
Page 62
2) AMST / A4MST
3) AMSH
61
Page 63
FLARING TECHNIQUE (FOR FLARE CONNECTION)
· Cut the pipe stages by stages, advancing the blade of pipe cutter slowly. Extra force and a deep cut will cause more
distortion of pipe and therefore, extra burr.
· Remove burr with burr remover. This will avoid unevenness on the flare face which will cause gas leak. Hold the flaring
end down to prevent burr from dropping inside pipe.
· The exact length of pipe protruding from the face of the flare die is determined by the flaring tool. The table shows the
use of an imperial die and riged die.
PIPE Ø (MM)
IMPERIAL DIE RIGED DIE
6.35 (1/4") 1.3 0.7
9.52 (3/8") 1.6 1.0
12.7 (1/2") 1.9 1.3
15.88 (5/8”) 2.2 1.7
Fix the pipe firmly on the flare die. Match the centers of both the flare die and the flaring punch. Tighten flaring punch
fully.
VACUUMING AND CHARGING
The pre-charged outdoor unit does not need any vacuuming or charging. However once it is connected, the connecting
pipe line and the indoor need to be vacuumed before releasing the refrigerant from the outdoor unit.
1) Open the service port core cap.
2) Connect pressure gauge to the service port.
3) Connect the line to vacuum pump. Open the charging manifold valve and turn the pump on (Diagram 1). Evacuation
time varies by the capacity of the pump but within 1 hour.
4) Repeat step 1 to step 3 for every indoor with respect to the correct pair of flare valve.
5) After evacuation, unscrew the spindle (diagram 2B) for the gas to run to indoor unit.
A(MM)
62
Page 64
Diagram 1
A
Diagram 2
B
ADDITIONAL CHARGE (FOR FLARE CONNECTION)
The refrigerant gas is charged in the outdoor unit and, if the piping length to every indoor is 5m, additional
charge of the refrigerant after vacuuming is not necessary.
When the piping length to every indoor is more than 5m, please add 15g of refrigerant for every addition of
1m pipe length.
Diagram 3 shows typical charging method.
Diagram 3
63
Page 65
10. REMOTE CONTROLLER OPERATION GUIDE
G8 REMOTE CONTROLLER
1
2
4
6
12
7
9
11
1. Transmission source
• The source where the signal will be transmitted.
2. Signal Transmission indication
• Blink to confirm the last setting has been send to
the unit.
3. On/Off Button
• Press once to start the air conditioner.
• Press again to stop the unit.
4. Temperature setting
• To set the desired room temperature, press the
button to increase or decrease the set
temperature.
• The temperature setting range is from 16°C to
30°C (Optional setting 18°C to 30°C).
• Press both buttons simultaneously to toggle the
temperature setting between °C and °F.
5. Operation mode
• Press the MODE button to select the type of
operating mode.
• For cooling only unit, the available modes are :
COOL, DRY & FAN.
• For heat pump unit, the available modes are :
AUTO, COOL, DRY, FAN & HEAT.
6. Fan speed selection
• Press the button until the desired fan speed is
achieved.
7. ON timer setting
• Press the SET button will activate the on timer
function.
• Set the desired on time by pressing the SET
button continuously. If the timer is set to 7.30am,
the air conditioner will turn on at 7.30am sharp.
• Press the CLR button to cancel the on timer
setting.
8. OFF timer setting
• Press the SET button will activate the off timer
function.
5
3
8
10
• Set the desired off time by pressing the SET
button continuously.
• Press the CLR button to cancel the off timer
setting.
9. Automatic air swing
• Press the SWING button to activate the
automatic air swing function.
• To distribute the air to a specific direction, press
the SWING button and wait until the louver move
to the desired direction and press the button
once again.
10. Sleep mode setting
• Press the button to activate sleep mode. This
function is available under COOL, HEAT &
AUTO mode.
• When it is activated in COOL mode, the set
temperature will be increased 0.5°C after
30mins, 1°C after 1 hour and 2°C after 2 hours.
• When it is activated in HEAT mode, the set
temperature will be decreased 1°C after 30mins,
2°C after 1 hour and 3°C after 2 hours.
11. Clock time setting
• Press button + or – to increase or decrease the
clock time.
12. Turbo function (optional – only applicable to
inverter unit)
• Press button for fast cooling or heating
operation.
• The temperature will be increased internally if it
is in the HEAT mode, decreased if in COOL or
DRY mode. Fan speed will be increased if it is
not at maximum speed.
• The temperature & fan speed will resume to user
setting if the button is pressed again or after
20mins.
• Available under HEAT, COOL & DRY modes
only.
64
Page 66
INDICATOR LIGHTS (cooling only unit)
LED Indicator Lights
IR signal receiver
When there is infrared remote control operating signal, the signal receiver on indoor unit will made a
(beep) for signal acceptance confirmation.
The table below shows the LED indicator light for air conditioner unit under normal operation and fault
condition. The LED indicator lights are located at the right bottom of the air conditioner unit.
Cooling unit : LED Indicator Lights Display
LED Indicator Lights : Normal Operation And Faulty Indication Table
Operation/ Faulty Indication Action
Power Sleep Timer Dry
¡ ¡
¡ ¡
¡ ¡
Continuously
Once every
2 sec
Twice every
2 Sec
3 times
every 2 sec
¡/l
Timer on -
Sleep mode on -
Dry mode -
Frost prevention mode
Clean the filter and
switch to high fan
Room air sensor contact loose/short Call your dealer
Indoor coil sensor contact
loose/short
Call your dealer
Outdoor abnormal operation Call your dealer
¡ ON ¡/l ON or OFF BLINK
65
Page 67
Heatpump unit : LED Indicator Lights Display
Cooling mode
(Green)
Heat/Fan
mode
Dry mode
(Orange)
Sleep mode
(Red)
(Red/Green)
The heat pump units is equipped with an "auto" mode, whereby the unit will provide reasonable room
temperature by switching the unit automatically to either "cool" mode or "heat" mode, according to the
temperature setting set by the user.
LED Indicator Lights: Normal Operation And Faulty Indication Table
Operation/ Faulty Indication Action
Cool Dry Fan Heat Sleep
¡
¡
¡
¡/l
Cooling Mode
Dry Mode
Fan Mode
-
-
-
¡
¡
¡
¡/l
¡/l
¡/l
Heat Mode
Auto mode in heating operation
Auto mode in cooling operation
Defrost operation
Compressor overload protection Call your dealer
Indoor coil sensor contact loose/short Call your dealer
Outdoor coil sensor contact loose/short Call your dealer
Room air sensor contact loose/short Call your dealer
If the system is in auto or sleep mode, switch to heat or cool
mode and turn off the sleep function, turn off the power
supply to reset the system, wait for 3 minutes and on the
system again.
If the system is in cool or heat mode (with the sleep function
off), the sensor may have contact problem, compressor
overload protection trip or gas leak.
-
-
-
-
¡ ON ¡/l ON or OFF BLINK
66
Page 68
G12 REMOTE CONTROLLER
Temperature Setting
• To set the desired room
temperature, press the button to
increase or decrease the set
temperature.
• The temperature setting range is
from 16°C to 30°C
• Press both buttons simultaneously
to toggle the temperature setting
between °C and °F
On/Off Button
• Press Once to start the air
conditioner
• Press again to stop the unit
ON Timer Setting
• Press the SET button will activate
the on timer function.
• Set the desired on time by pressing
the SET button continuously.
• Press the CLR button to cancel the
off timer setting
Personalised Setting
• Press and hold the button for 3s to
initiate personalized setting.
• Set the individual setting e.g.
MODE, SET TEMP or FAN SPEED
and leave for 4s to save
• 2 groups of settings are allowed to
stored in the handset
OFF Timer Setting
• Press the SET button will activate
the off timer function.
• Set the desired off time by pressing
the SET button continuously.
• Press the CLR button to cancel the
off timer setting
Clock Time Setting
• Press button + or - to increase or
decrease the clock time.
Fan Speed Selection
• Press the button until the desired
fan speed is achieved.
Turbo Mode
• Press the TURBO button to achieve
the required set temperature in a
short time.
Automatic Air Awing
• Press the SWING button to activate
the automatic air swing function.
• To distribute the air to a specific
direction, press the SWING button
and wait until the louver move to
the desired direction and press the
button once again.
Ionizer
• Press the button to activate the
negative Ion function, which will
refresh the indoor air effectively.
Sleep Mode
• Press the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO
mode.
• When it is activated in COOL
mode, the set temperature will be
increased 0.5°C after 30mins, 1°C
after 1 hour and 2°C after 2 hours.
• When it is activated in HEAT mode,
the set temperature will be
decreased 1°C after 30mins, 2°C
after 1 hour and 3°C after 2 hours.
Operating Mode
• Press the MODE button to select
the type of operating mode.
• For Cooling only unit, the available
modes are: COOL, DRY & FAN.
• For Heatpump unit, the available
modes are: AUTO, COOL, DRY,
FAN & HEAT.
67
Page 69
INDICATOR LIGHTS
IR signal receiver
When there is infrared remote control operating signal, the signal receiver on indoor unit will made a
(beep) for signal acceptance confirmation.
The table below shows the LED indicator light for air conditioner unit under normal operation and fault condition.
The LED indicator lights are located at the middle of the air conditioner unit.
The heat pump units is equipped with an “auto” mode, whereby the unit will provide reasonable room temperature
by switching the unit automatically to either “cool” mode or “heat” mode, according to the temperature setting
set by the user.
Cooling unit : LED Indicator Lights Display
COOL / HEAT
IONIZER
TIMER
SLEEP MODE
LED Indicator Lights : Normal Operation And Faulty Indication Table
Normal Operation / Fault Indication Action
COOL/HEAT
(GREEN/RED)
Red
Green
Green
Red
Green
Red
/
/
/
/
/
/
Cool mode
Heat mode
Auto mode in heating operation
Auto mode in cooling operation
Timer on
Sleep mode on
Ionizer on
Room air sensor contact Loose / Short
Outdoor coil sensor contact Loose / Short
-
-
-
-
-
-
-
Call your dealer
- ON
Red
Indoor coil sensor contact Loose / Short
Compressor overload protection trip or
gas leask
Defrost operation
/ - ON or OFF
Call your dealer
Call your dealer
-
- Blinking
68
Page 70
The design of the A(4)MSD, A(4)MST, and AMSH outdoor series allows servicing to be carried out readily and easy. The
11. SERVICING AND MAINTENANCE
removal of the top, side, front and back panel make almost every part accessible.
Model : Cooling – AMSD/A4MSD 1010/ 1015/ 1515 A
Heatpump – AMSD/A4MSD 1010/ 1015/ 1515 AR
Cooling – AMSH 8K8/ 8K66/ 66K66/ 66K555/ K77 A
Model : Cooling – AMSD 1020/ 1520 A
Heatpump – AMSD 1520 AR
69
Page 71
MODEL : AMSD 2020 A
MODEL : AMST 101010/ 101015/ 101515/ 151515/ 101020 A
A4MST 101010/ 101015/ 101515/ 151515 A/AR
70
Page 72
MODEL : AMST 101025/ 101525/ 151525 A
Under normal circumstance, these outdoor units require a check and cleaning of air intake coil surface once quarterly.
However, if a unit is installed in areas subjected to much oil mist and dust, the coils must be regularly cleaned by
qualified Air Conditioner Service Technicians to ensure sufficient heat exchange and proper operation. Otherwise, the
system's life span may be shortened.
CAUTION!
Do not charge OXYGEN, ACETYLENE OR OTHER FLAMMABLE and poisonous gases into the unit when
performing a leakage test or an airtight test. These gases could cause severe explosion and damage if exposed
to high temperatures and pressures.
It is recommended that only nitrogen or refrigerant be charged when performing the leakage or airtight test.
71
Page 73
ELECTRICAL CONNECTIONS
12. OPERATION
13. TROUBLESHOOTING
Wiring regulations on wire diameters differ from country to country. Please refer to your LOCAL ELECTRICAL CODES
for field wiring rules. Be sure that installation comply with such rules and regulations.
GENERAL PRECAUTIONS
Ensure that the rated voltage of the unit corresponds to the name plate before carrying out proper wiring according to the
wiring diagram.
Provide a power outlet to be used exclusively for each unit. A power supply disconnect and a circuit breaker for over
current protection should be provided in the exclusive line.
All wiring must be firmly connected.
All wiring must not touch the refrigerant piping, compressor or any moving parts of fan motors.
OPERATIONAL CHECK
After all wiring is completed and the system is charged with refrigerant, make sure that unit is operating properly. Check
that :
• Condenser fan is running, with warm air blowing off the condensing unit.
• Evaporator blowers are running and discharging cool air.
• The micro-computer system incorporate a 3-minute delay in the circuitry. Thus, it requires about 3 minutes upon cut off
before the outdoor condensing unit can start up.
• To check if there is any miswiring, turn on one unit at a time.
• After running for 10-15 minutes. Check if the suction (low side) pressure is within normal operating range.
When any air conditioner malfunction is noted, immediately switch off the power supply to the unit and contact the local
dealer, if necessary. Some simple troubleshooting tips are given below :
TROUBLE PROBABLE CAUSE SUGGESTED ACTION
1. Fan does not work
2. Fan works, but compressor does
not work
3. Both fan and compressor does
not work
4. Air-Conditioner works but cooling
not satisfactory
1. No power supply
2. Fan capacitor faulty
3. Fan motor faulty
4. Switch faulty
1 . Thermostat setting too high
2. Compressor capacitor faulty
3. Compressor faulty
4. Compressor contactor faulty
1. Power failure
2. Starter trip
3. Fuse blown in power switch or
operating unit
1. Thermostat setting too high
2. Door and/or windows not closed
3. Condenser coil dirty
4. Some objects blocking the inlet
and/or outlet of the unit
5. Refrigerant charge too low
1. Check power supply
2. Contact local dealer
3. Contact local dealer
4. Change switch
1 . Reset thermostat
2. Contact local dealer
3. Contact local dealer
4. Contact local dealer
1. Operate when power supply
resume
2. Reset starter
3. Check and replace fuse
1. Reset thermostat
2. Close door and/or windows
3. Clean condenser coil
4. Remove the objects
5. Contact local dealer
72
Page 74
Generally, there are two kinds of common problems, i.e. starting failure and insufficient cooling. “Starting failure” is
caused by electrical defect while “insufficient cooling” is caused by improper application or defects in refrigerant circuit.
DIAGNOSIS OF STARTING FAILURE
Starting failure
Outdoor unit does not
operate at all
Check power source
Check fuse and circuit
breaker and power
cord
Transformer
defective
No
Check input
signal from
indoor to
outdoor unit
No
Check indoor unit
Check
secondary
side of power
transformer
OK
Yes
No
PCB controller
in outdoor unit
functioning
Check compressor or
fan motor
Yes
Preliminary causes :-
- Voltage not within +/- 10% or
rated
- Temperature setting improper
- Wiring disconnected
Ÿ
Loose connection
Ÿ
Capacitor defective
Ÿ
Compressor or fan
motor defective
PCB defective
DIAGNOSIS OF INSUFFICIENT COOLING
Insufficient cooling
Insufficient cooling
Insufficient cooling
Excessive heat source
e.g. electric kettle
Room over-crowed
with people
Refrigerant circuit
Leakage or insufficient
charge
Restriction at strainer,
capillary, etc.
Air circulation
Indoor/outdoor coil
dirty (clogged)
Air filter dirty
Compressor
Less or no
compression (low
running current)
Windows/doors wide
open
Fan malfunction
Obstruction at air inlet/
outlet of indoor/
outdoor unit
73
Page 75
MODEL : AMSD / A4MSD 1010 / 1015 / 1515 A/AR
14. PART LIST
1. BACK PANEL
2. HANDLING HANDLE
3. TOP PANEL
4. CONDENSER COIL ASSEMBLY
5. COMPRESSOR NUT M8
6. FLAT WASHER
7. ROTARY COMPRESSOR 2
8. ROTARY COMPRESSOR 1
9. RUBBER GROMMET
10. TRUSS HEAD PHILIP SCREW
11. SPRING WASHER
12. MOUNTING PLATE ASSEMBLY
13. FRONT PANEL
14. HEX NUT 3/8”
15. SQUARE WASHER
16. FAN BLADE
17. RING WASHER
18. FAN MOTOR
19. FAN MOTOR BRACKET
20. BASE PAN ASSEMBLY
21. PARTITION ASSEMBLY
22. TERMINAL BOX PANEL WIRING ASSEMBLY
23. SIDE PANEL
24. ACCESS PANEL
25. FLARE VALVE MOUNTING PLATE ASSEMBLY
26. TERMINAL BOX COVER
74
Page 76
MODEL : AMSD 1020A / 1520 A
1. ROTARY COMPRESSOR 2 (1.0/1.5HP) 14. SUCTION TUBE 2
2. ROTARY COMPRESSOR 1 (2.0HP) 15. FAN GUARD
3. DISCHARGE TUBE 1 16. ORIFICE FOR 18” PROPELLER
4. SUCTION TUBE 1 17. FAN BLADE 18”
5. DISCHARGE TUBE 2 18. FAN MOTOR BRACKET
6. CAP. TUBE 2 ASSY 19. FAN MOTOR
7. CONTROL BOX ASSY 20. BASE PAN ASSY
8. CONTROL BOX COVER 21. FRONT PANEL
9. PARTITION 22. SIDE PANEL RIGHT
10. CAP. TUBE 1 ASSY 23. VALVE PLATE
11. TOP PANEL 24. FLARE VALVES (GAS)
12. CONDENSER COIL ASSY 25. FLARE VALVES (LIQUID)
13. SIDE PANEL LEFT
75
Page 77
MODEL : AMSD 1520 AR
1. PANEL, TOP 16. ASSEMBLY, FLARE VALVE PLATE
2. ASSEMBLY, CONDENSER COIL 17. VALVE, FLARE 3 WAY ½”
3. TUBE, 4WV ‘E’ – GAS TO VALVE COMP. 1 18. VALVE, FLARE 3 WAY 5/8”
4. ASSEMBLY, SIDE PANEL LEFT INS. 19. VALVE, FLARE 3 WAY ¼”
5. TUBE, 4WV ‘C’ – O/D COIL COMP. 1 20. ASSY., SUCTION COMP. 2
6. TUBE, DISCHARGE COMP. 2 21. TUBE, 4WV ‘E’ COMP. 2
7. MATSUSHITA COMPRESSOR (2JS350D3BB02) 22. MATSUSHITA COMPRESSOR (2KS224D3AC02)
8. ASSEMBLY, FAN GUARD INS. 23. 4 WAY VALVE (CHV0201 OR V26110B)
9. ASSEMBLY, ORIFICE FOR 19” PROPELLER 24. ASSY., DISCHARGE COMP. 1
10. PROPELLER FAN 19” 25. ASSY., TUBE SUCTION COMP. 1
11. BRACKET, FAN MOTOR 26. TUBE, 4WV ‘C’ – GAS 1
12. MOTOR, FAN 27. ASSEMBLY, TERMINAL BOX (MAIN)
13. ASSEMBLY, BASE PAN 28. COVER, TERMINAL BOX
14. ASSEMBLY, PANEL FRONT INS. 29. PANEL, PARTITION
15. ASSY., SIDE PANEL RIGHT INS. 30. 4 WAY VALVE (CH0101 OR VH7100B)
76
Page 78
MODEL : AMSD 2020A
1. ROTARY COMPRESSOR 1 14. DISCHARGE TUBE 1
2. ROTARY COMPRESSOR 2 15. FAN GUARD
3. SUCTION TUBE 2 16. ORIFICE FOR 19” PROPELLER
4. DISCHARGE TUBE 2 17. FAN BLADE 19”
5. SUCTION TUBE 1 18. FAN MOTOR BRACKET
6. CAP. TUBE 2 ASSY 19. FAN MOTOR
7. CONTROL BOX ASSY 20. BASE PAN ASSY
8. CONTROL BOX COVER 21. FRONT PANEL
9. PARTITION 22. SIDE PANEL RIGHT
10. CAP. TUBE 1 ASSY 23. VALVE PLATE
11. TOP PANEL 24. FLARE VALVES (GAS)
12. CONDENSER COIL ASSY 25. FLARE VALVES (LIQUID)
13. SIDE PANEL LEFT
77
Page 79
MODEL : AMST 101010 / 101015 / 101515 / 151515 / 101020 A
A4MST 101010 / 101015 / 101515 / 151515 A
1. ROTARY COMPRESSOR 2 16. SIDE PANEL LEFT
2. ROTARY COMPRESSOR 1 17. SUCTION TUBE 2
3. ROTARY COMPRESSOR 3 18. DISCHARGE TUBE 2
4. SUCTION TUBE 1 19. FAN GUARD
5. SUCTION TUBE 3 20. ORIFICE FOR 19” PROPELLER
6. DISCHARGE TUBE 1 21. PROPELLER 19”
7. DISCHARGE TUBE 3 22. FAN MOTOR BRACKET
8. CAP. TUBE 1 ASSY 23. FAN MOTOR
9. CONTROL BOX ASSY 24. BASE PAN ASSY
10. CONTROL BOX COVER 25. FRONT PANEL
11. CAP. TUBE 2 ASSY 26. SIDE PANEL RIGHT
12. PARTITION 27. VALVE PLATE
13. CAP. TUBE 3 ASSY 28. FLARE VALVES (GAS)
14. TOP PANEL 29. FLARE VALVES (LIQUID)
15. CONDENSER COIL ASSY
78
Page 80
MODEL : AMST 101025 / 101525 / 151525 A
1. ASSY, PANEL BASE
2. ASSY, MAIN COIL
3. BRACKET, MOTOR
4. FAN MOTOR (YJ145 - SWELLING)
5. FAN, BLADE
6. ASSY, MOUNT PLATE BTM
7. RUBBER, GROMMET
8. COMPRESSOR, (2PS164D2BC02)
9. COMPRESSOR, (2KS2240D3AC02)
10. ASSY, VALVE BRACKET
11. ASSY, PANEL PARTITION
12. ASSY, MOUNTING PLT TOP
13. ASSY, PANEL BACK RIGHT
14. ASSY, COMP. 2JS438D3 (BENDED)
15. ASSY, VALVE BRACKET
16. ASSY, FRONT PANEL
17. ASSY, CONTROL BOX
18. ASSY, STICKER GUIDE TER. BOX COVER
19. ASSY, PANEL SERVICE
20. PANEL, SIDE LEFT
21. PANEL, TOP
22. BUSH, RUBBER
23. ASSY, UNIT TUBING
24. SCREW, SELF TAPPING
25. SCREW, PH T/HD 8 x 3/8 - (R / P)
26. SCREW, TRUSS HEAD PHILIP M5 x 16
27. WASHER, SPRING OD15 x ID8.5 x t1.2
79
Page 81
MODEL : A4MST 101010 AR
1. ASSY., BASE PAN 16. ASSY., 4WV COMP. 3 ( 1.0 HP )
2. COMPRESSOR, RUBBER GROMMET 17. ASSY., CAP. TUBE 1 ( 1.0 HP )
3. ASSY., INS. PARTITION 18. ASSY., CAP. TUBE 2 ( 1.0 HP )
4. ASSY., OUTDOOR COIL MAIN 19. ASSY., CAP. TUBE 3 ( 1.0 HP )
5. CLIP, SENSOR M2 6mm x 9.52mm 20. ASSY., SIDE PANEL RIGHT INS.
6. SENSOR, OUTDOOR DEFROST 21. PANEL, SIDE LEFT
7. ASSY., COMP. 4PS1640AA 22. ASSY., ORIFICE 19” PROPELLER
8. ASSY., VALVE PLATE MAIN 23. BRACKET, MOTOR
9. FLARE JOINT VALVE PLATE 24. ASSY., FAN MOTOR
10. ASSY., 3-WAY VALVE ( 1/2" ) 25. PROPELLER, FAN ( 19” )
11. ASSY., 3-WAY VALVE ( 3/8” ) 26. ASSY., PANEL TERMINAL BOX
12. SCREW, TRUSS HEAD PHILLIP 27. FAN, GUARD
13. ASSY., 2-WAY VALVE ( 1/4” ) 28. PANEL, TOP
14. ASSY., 4WV COMP. 1 ( 1.0 HP )
15. ASSY., 4WV COMP. 2 ( 1.0 HP )
29. PANEL, FRONT
80
Page 82
MODEL : A4MST 101015 AR
1. ASSY., BASE PAN
2. COMPRESSOR, RUBBER GROMMET
3. ASSY., INS. PARTITION
4. ASSY., OUTDOOR COIL MAIN
5. CLIP, SENSOR M2 6mm x 9.52mm
6. SENSOR, OUTDOOR DEFROST
7. ASSY., COMP. 4PS1640AA
. ASSY., COMP. 4KS2250AA
8
. ASSY., VALVE PLATE MAIN
9
. FLARE JOINT VALVE PLATE
10
. ASSY., 3-WAY VALVE ( 1/2" )
11
. ASSY., 3-WAY VALVE ( 3/8” )
12
. SCREW, TRUSS HEAD PHILLIP
13
. ASSY., 2-WAY VALVE ( 1/4” )
14
15. ASSY., 4WV COMP. 1 ( 1.0 HP )
16. ASSY., 4WV COMP. 2 ( 1.0 HP )
17. ASSY., 4WV COMP. 3 ( 1.5 HP )
18. ASSY., CAP. TUBE 1 ( 1.0 HP )
19. ASSY., CAP. TUBE 2 ( 1.0 HP )
20. ASSY., CAP. TUBE 3 ( 1.5 HP )
21. ASSY., SIDE PANEL RIGHT INS.
22. PANEL, SIDE LEFT
23. ASSY., ORIFICE 19” PROPELLER
24. BRACKET, MOTOR
25. ASSY., FAN MOTOR
26. PROPELLER, FAN ( 19” )
27. ASSY., PANEL TERMINAL BOX
28. FAN, GUARD
29. PANEL, FRONT
30. PANEL, TOP
81
Page 83
MODEL : A4MST 101515 AR
1. ASSY., BASE PAN
2. ASSY., INS. PARTITION
3. ASSY., OUTDOOR COIL MAIN
4. CLIP, SENSOR M2 6mm x 9.52mm
SENSOR, OUTDOOR DEFROST
5.
. ASSY., COMP. 4PS1640AA
6.
. ASSY., COMP. 4KS2250AA
7
. ASSY., VALVE PLATE MAIN
8
. FLARE JOINT VALVE PLATE
9
. ASSY., 3-WAY VALVE ( 1/2" )
10
. ASSY., 3-WAY VALVE ( 1/2" )
11
. ASSY., 3-WAY VALVE ( 3/8” )
12
. SCREW, TRUSS HEAD PHILLIP
13
14. ASSY., 2-WAY VALVE ( 1/4” )
15. ASSY., 4WV COMP. 1 ( 1.0 HP )
16. ASSY., 4WV COMP. 2 ( 1.5 HP )
17. ASSY., 4WV COMP. 3 ( 1.5 HP )
18. ASSY., CAP. TUBE 1 ( 1.0 HP )
19. ASSY., CAP. TUBE 2 ( 1.5 HP )
20. ASSY., CAP. TUBE 3 ( 1.5 HP )
21. ASSY., SIDE PANEL RIGHT INS.
22. ASSY., ORIFICE 19” PROPELLER
23. BRACKET, MOTOR
24. ASSY., FAN MOTOR
25. PROPELLER, FAN ( 19” )
26. ASSY., PANEL TERMINAL BOX
27. FAN, GUARD
28. PANEL, FRONT
29. PANEL, TOP
82
Page 84
MODEL : A4MST 151515 AR
1. ASSY., BASE PAN
2. ASSY., INS. PARTITION
3. ASSY., OUTDOOR COIL MAIN
4. CLIP, SENSOR M2 6mm x 9.52mm
5. SENSOR, OUTDOOR DEFROST
6. ASSY., VALVE PLATE MAIN
7. FLARE JOINT VALVE PLATE
8. ASSY., 3-WAY VALVE ( 1/2" )
9. ASSY., 3-WAY VALVE ( 1/2" )
10. SCREW, TRUSS HEAD PHILLIP
11. ASSY., 2-WAY VALVE ( 1/4” )
12. ASSY., COMP. 4KS2250AA
13. ASSY., 4WV COMP. 1 ( 1.5 HP )
14. ASSY., 4WV COMP. 2 ( 1.5 HP )
15. ASSY., 4WV COMP. 3 ( 1.5 HP )
16. ASSY., CAP. TUBE 1 ( 1.5 HP )
17. ASSY., CAP. TUBE 2 ( 1.5 HP )
18. ASSY., CAP. TUBE 3 ( 1.5 HP )
19. ASSY., SIDE PANEL RIGHT INS.
20. PANEL, SIDE LEFT
21. ASSY., ORIFICE 19” PROPELLER
22. BRACKET, MOTOR
23. ASSY., FAN MOTOR
24. PROPELLER, FAN ( 19” )
25. ASSY., PANEL TERMINAL BOX
26. FAN, GUARD
27. PANEL, TOP
28. PANEL, FRONT
83
Page 85
MODEL : AMSH 8K8 A
1. ASSY, BACK PANEL 14. FAN BLADE
2. ASSY, TOP PANEL 15. WASHER, RING
3. ASSY, CONDENSER COIL 16. MOTOR, FAN
4. NUT M8, WITH WASHER 17. BRACKER, FAN MOTOR
5. ROTARY COMPRESSOR A (2PS132D2AB02) 18. ASSY, BASE PAN
6. ROTARY COMPRESSOR B (2PS132D2AB02) 19. ASSY, PARTITION
7. GROMMET, RUBBER 20. ASSY, TERMINAL BOX PANEL
8. SCREW, TRUSS HEAD PHILIP 21. ASSY, SIDE PANEL
9. WASHER, SPRING 22. ASSY, ACCESS PANEL
10. ASSY, MOUNTING PLATE 23. ASSY, VALVE PLATE
11. ASSEMBLY, PANEL FRONT 24. DAMPER, RUBBER
12. NUT, HEXAGON 3/8" 25. COVER, TERMINAL BOX
13. WASHER, SQUARE 26. HANDLING HANDLE
84
Page 86
MODEL : AMSH 8K66 / 66K66 / 66K555 A
1. ASSY, BACK PANEL 14. FAN BLADE
2. ASSY, TOP PANEL 15. WASHER, RING
3. ASSY, CONDENSER COIL 16. MOTOR, FAN
4. NUT M8, WITH WASHER 17. BRACKER, FAN MOTOR
5. ROTARY COMPRESSOR A (2PS192D2AB02) 18. ASSY, BASE PAN
6. ROTARY COMPRESSOR B (2PS192D2AB02) 19. ASSY, PARTITION
7. GROMMET, RUBBER 20. ASSY, TERMINAL BOX PANEL
8. SCREW, TRUSS HEAD PHILIP 21. ASSY, SIDE PANEL
9. WASHER, SPRING 22. ASSY, ACCESS PANEL
10. ASSY, MOUNTING PLATE 23. ASSY, VALVE PLATE
11. ASSY, PANEL FRONT 24. DAMPER, RUBBER
12. NUT, HEXAGON 3/8" 25. HANDLING HANDLE
13. WASHER, SQUARE
85
Page 87
MODEL : AMSH K77 A
1. BACK PANEL ASSY 14. BASE PAN ASSY
2. TOP PANEL ASSY 15. CAPILLARY TUBE ASSY
3. CONDENSER COIL ASSY 16. PARTITION ASSY
4. MOTOR MOUNTING BRACKET 17. TERMINAL BOX ASSY
5. FAN MOTOR 18. SIDE PANEL ASSY
6. FAN BLADE 19. ACCESS PANEL
7. FRONT GRILLE ASSY 20. VALVE PLATE ASSY
8. FAN SET SCREW 21. COMPRESSOR JACKET
9. TUBE SUCTION A & B ASSY 22. TRUSS HEAD PHILIP SCREW
10. DISCHARGE TUBE 23. PAN HEAD TAPPING SCREW
11. ROTARY COMPRESSOR 24. TRUSS HEAD PHILIP SCREW
12. RUBBER GROMMET 25. SOLENOID COIL INS 1&2 ASSY
13. NUT WITH WASHER (M8)
86
Page 88
While upmost care is taken in ensuring that all details in the publication are correct at time of going to press, we are constantly striving for
improvement and therefore reserve the rights to alter model specifications and equipment without prior notice. Details of specifications and
equipment are also subject to change to suit local conditions and equipments and not all models are available in every market.
Loading...