Acrox OPWISMMU01 User Manual

Features and specifications are subject to change without notice. All trademarks ar e the property o f their respect ive owners © 2 007, Targus Group Internat ional, Inc. and Targus, Inc. Manufactu rer / Importer: Unit 1202-07, 12/F, Tower 2, Metroplaza , No. 223 Hing Fong Road, Kwai Fong, N.T. Hong Kong
AMW25AP / 410-1098-006B
USER GUIDE
30
2.4GHz OPTICAL MOUSE
Introduction
Congratulations on your purchase of the 2.4GHz Optical Mouse Notebook Mouse. This mouse features a tracking resolution switch users who require more precision or speed with various application The Stow-N-Go receiver clips onto the mouse for ease of use which traveling or on the go. This mouse also features a 4-way scrolling wheel which allows for both vertical and horizontal navigation.
System Requirements
• Hardware - USB port
• Windows® 2000/XP
• Windows Vista™
• Mac OS X 10.2.8 (or greater)
2
Installing the Batteries
1. Remove the battery cover from the back of the mouse by sliding off the cover of the mouse. Hold the mouse in your hands and with the back of the mouse away from you. Press down on the corners of the battery cover and slide towards the back of the mouse. Lift the cover off from the back of the mouse.
2. Insert two AA-size batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment. To replace the battery cover, place the cover on top of the mouse and slide forward until it clicks into place.
NOTE: WHEN THE BATTERY IS LOW, THE LOW POWER INDICATOR LIGHT LOCATED IN THE DPI SWITCHING BUTTON WILL FLASH RED. PLEASE REPLACE WITH TWO NEW AA-SIZE BATTERIES.
DPI switching button
When power is on, the mouse goes into "sleep mode" after 8 minutes of inactivity. To activate the mouse, press any mouse key.
3
Loading...
+ 6 hidden pages