Acrox MP10050622 Users Manual

Deluxe RF Laser Mouse

With Office hot key

OWNER'S GUIDE

CAUTION : To use this mouse properly, please read the user's guide before installation

Welcome

Your mouse uses a new generation technology – laser module that
replaces the traditional LED mouse and provides amazing tracking
ability. The laser module accurately scans the surface in 30 times
sensitive of LED optical mouse. You can work with your mouse in
most surfaces perfectly.

Safety Notice

1. This product complies with IEC 60825-1, class 1 laser
product.

2. Your product complies with FCC and CE rules.

3. This product has no serviceable parts. Use of controls or
adjustments of procedures other than
the user guide may result in dangerous.

CAUTION:
Change or modifications not expressly approved by the
manufacturer responsible for compliance could void the
user's authority to operate the equipment

1

SETUP the Mouse

The Mouse is connected to your computer via a cable. It needs to
plug in your computer by a USB port or a mouse port.

For PS/2 mouse port installation

Please turn off your computer before installing your
mouse. Plugging and unplugging cables to your
computer's mouse port while the computer is running
can damage the mouse port or your Computer.

For USB port installation

Windows 98 (or higher) and Macintosh OS 8.6
(or higher) are required for USB port installation.
Connect the receiver cable to the USB port on
the computer. For Windows, you may be prompted to insert the
Windows software CD. Insert the divers’ CD into the computer's
CD-ROM driver when asked to do so. Follow the instructions steps.

PS2 Mouse Port

USB Port

2

Installing the batteries

Step 1 Press the tag on the battery compartment cover of the mouse
and pull up.
Step 2 Insert the batteries as shown inside the battery compartment.
Step 3 Replace the cover.

Install the Receiver and the recharger

Connect to the USB port of your computer

3