Revision: 1.1
AR-N6000D41 & AR-N6000D51
System Guide
1
Contents
1. ...................................................4 Introduction to AR-N6000
1.1. .............................................................................4 Specifications
................................................................................4 Packing List
1.2.
1.3.
.....................................................................5 System Dissection
2. .............................7 Procedures of Assembly/Disassembly
2.1. ...................................................................7 CF Card Installation
.................................................................8 SO-DIMM Installation
2.2.
Revision: 1.1
...........................................................9 HDD module Installation
2.3.
3. .....................................................12 AR-B6000 Board Guide
3.1. ..............................................................................12 Introduction
3.1.1. ...............................................................................................12 Features
3.1.2.
3.1.3.
3.1.4.
3.2. ..............................................................16 Hardware Information
3.2.1. ...............................................................................................16 Location
3.2.2. ..................................18 Connector, Header and Jumper Setting Table
........................................................................................13 Specification
...............................................................................14 Package Contents
.....................................................................................15 Block Diagram
3.2.1.1. ...........................................................................................................16 Top Side
3.2.1.2. .....................................................................................................17 Bottom Side
3.2.2.1. ...........................................................................19 Pin definition for Connector
3.2.2.2. ................................................................................20 Pin definition for Header
3.2.2.3. .................................................................21 Jumper Setting and Pin definition
3.3. .............................................................................22 BIOS Setting
3.3.1. .....................................................................22 Main (System Overview)
3.3.2.
.........................................................22 Advanced (Advanced Settings)
2
3.3.3. ..........................................................................23 Power (ACPI Setting)
Revision: 1.1
3.3.4.
3.3.5.
...........................................................................23 Boot (Boot Settings)
...............................................................................24 Exit (Exit Options)
3.4. ...................................................................................25 Appendix
3.4.1. .............................................25 Appendix A - RJ45 LAN LED definition
3.4.2.
3.4.3.
...................................26 Appendix B- Front Panel LAN LED definition
...........................................27 Appendix C- Front Panel LED definition
3
Revision: 1.1
1. Introduction to AR-N6000
Acrosser's Microbox Networking device AR-N6000 is a small, cost-effective and entry-level
solution, which is suitable for small office. Base on Intel ATOM D410 (single core & 512K cache) or
D510 (dual cores & 1M cache) 1.66GHz CPU, the AR-N6000 consumes very low power to save
the total costs. We also put a quiet fan to keep the low noise, which will not cause uncomfortable
voice. By four 10/100/1000Mbps LANs, the AR-N6000 is sufficient for the small business security
hardware solution.
Key features:
1. Intel ATOM D410 or D510 CPU
2. Intel ICH8M Chipsets.
3. DDRII 667/800 SO-DIMM x 1, up to 2GB memory
4. Intel 82574L 10/100/1000Mbps x 4
5. For N6000D51 system, LAN1 and LAN2 support bypass feature
6. CF socket, 2.5” HDD bay x 1, SATA II interface with power x 2
7. Console, VGA (pinhead), USB 2.0 x 4 (2 x connectors, 2 x pin head)
8. Support boot from LAN, console redirection
9. Support mini-PCI for feature expansion
10. Compact size
1.1. Specifications
Item Description
System AR-N6000
CPU Board AR-N6000 series
System Dimensions 242×150.5×40 (mm)
1.2. Packing List
Description Q’ty
AR-N6000 system 1
Console Cable 1
Quick user manual 1
CD with Driver and Manual 1
Power adapter 1
SATA cable 1
SATA power cable 1
USA or Europe or Japan or UK power cord 1
4
1.3. System Dissection
(1) Dimensions
Revision: 1.1
(2) Front Panel
Power In
COM LAN3
USB
LAN2
LAN1
Reset LAN4
5
(3) System Configuration
Revision: 1.1
Item Part No. Description Remark
1 170010974-G TOP COVER 1
2 170010972-G BOTTOM 1
3 170010973-G BOTTOM BRACKET 1
4 170010974-G 2.5” HDD BAY 1
5 020010024 or 020010025 AR-B6000D41 or AR-B6000D51 1
6 140060027-G FAN 1
7 180070086-G FRONT PANEL 1
8 180020023-G Shock-proof mat 3
6
2. Procedures of Assembly/Disassembly
2.1. CF Card Installation
1. Unscrew the five screws of top cover and take it out.
2. Install the CF card into the CF card socket.
CF card socket
Revision: 1.1
INSERT
7
2.2. SO-DIMM Installation
1. Unscrew the screws of Bottom cover and take it out.
Revision: 1.1
Unscrew the screws
2. Install the SO-DIMM into the socket.
Install
Mini PCIE socket
8
2.3. HDD module Installation
1. Open the top cover and take it.
Revision: 1.1
HDD_bay
2. Please take 4 rubbers from accessory bag, and paste them following below positions.
Rubber
3.
Install 2.5” HDD to the HDD_bracket and screw the screws to fix it.
9
Revision: 1.1
Screw
4. Insert SATA cable and SATA power cable to 2.5” HDD.
10
5. Plug SATA cable and SATA power cable to AR-B6000 board.
SATA power connector
SATA connector
Revision: 1.1
6. Finish the HDD module installation after install top cover.
11
Revision: 1.1
3. AR-B6000 Board Guide
3.1. Introduction
Welcome to the AR-B6000 series Computer. The AR-B6000 series is a Networking board for
Micro-box and Rack-mount with four sets of GbE LAN. Intel Atom (Pineview-D) D410/D510
+ICH8M.
AR-B6000D41 is a networking board for micro-box and Rack-mount Platform with Intel Atom
D410 +ICH8M, 4*10/100/1000 LAN.
AR-B6000D51 is a Networking board for micro-box and Rack-mount Platform with Intel Atom
D510 +ICH8M, 4*10/100/1000 LAN with by-pass.
3.1.1. Features
Processor:
AR-B6000D41: Intel® Atom™ Processor D410 (Single Core, 512K L2 Cache, 1.66 GHz)
AR-B6000D51: Intel® Atom™ Processor D510 (Dual Core, 2X 512K L2 Cache, 1.66 GHz)
Chipsets: Intel® ICH8M
Memory: DDR2 667/800MHz SO-DIMM, Maximum 2GB
Display: VGA
Storage: 1x CF, 2x SATA II,
Communication: 4x Gbps Ethernet, 7x USB 2.0, 3x RS-232, 1x RS-232/422/485
General: Watchdog timer, 8-bit GPIO, and PCI-104 expansion slot.
12
Revision: 1.1
3.1.2. Specification
System
CPU AR-B6000D41 Intel® Atom™ Processor D410 (512K L2 Cache, 1.66 GHz)
AR-B6000D51 Intel® Atom™ Processor D510 (2X 512K L2 Cache, 1.66 GHz)
Memory One SO-DIMM socket support 667/800 MHz DDR2 SDRAM up to 2GB
Graphic
Controller
Intel® GMA 3150
Gen3.5+ GFX Core, GFX Render Core Frequency @ 200MHz (400MHz), DX9
Video Memory DVMT 4.0, Maximum 256MB shared
Intel® Dynamic Video Memory Technology support 4.0
Video Interface 1 x VGA port (DB15)
Chipset Intel® ICH8M
Thermal
solution
FAN connector for CPU FAN
Fan connector for system FAN*2
BIOS 1. support console redirection(default enable)
2. support bypass setting(default disable)
3. support boot from LAN
Super I/O W83627DHC
Network Interface
Ethernet 4 *RJ45 JACK with LED (Refer to Appendix A)
Intel 82574L (10/100/1000Mbps) (L1~L4),
LAN by-Pass LAN1 and LAN2 support by-pass function
Reserve 1*3 pin Jumper for Hardware select bypass status.
AR-B6000D51 only
I/O
Front panel From left to right:
1. LAN1/ LAN2/ LAN3/ LAN4 LED: 1000, 10/100, Act. (Refer to Appendix B)
2. Power LED/HDD/Bypass: Green/Green/Yellow (Refer to Appendix C)
Rear panel From left to right:
Power Inlet
2 * USB (use standby power)
COM port (DB9)
LAN4/ LAN3/ LAN2
Reset Button
LAN1
1. 4 x USB 2.0(2.54 pitch)
Mini-PCI
PCI slot
GPIO:
Use super I/O game port as GPIO
Internal I/O
2x5 pin 2.0mm Pin Head
8-bit GPIO, 1 x GND, 1 x 3.3V/5V jumper selectable
LCM pin head( 7-pin pinhead 2.54mm)
Power input (Mini Fit 4 pin Co-lay with power inlet)
1*8 pin 2.54mm reserve for CPLD update
VGA pin head(2*5pin, 2.0mm
Panel connector(2*4pin, 2.54mm)
Storage
13
CF 1 x Compact Flash socket, Type-II Socket
(Master mode) Support UDMA
SATA 2 x SATAII interface with power(JST 4 pin)
Others
Watchdog Timer Software programmable 1~255 Seconds,
Battery Lithium Battery, 3V 220mAH (CR2032)
Hardware
monitoring
CPU voltage
CPU and System Temperature
OS support Win XP/XP Embedded, Fedora 10(2.6.27)
Mechanical
Dimension 218 x 146mm
Operating
0~60°C (32~140°F)
Temperature
Storage
-20~80°C (-4~176°F)
Temperature
Relative
0 to 90% @ 40°C, non-condensing (95% @ 40°C, Non-Condensing by request)
Humidity
Power Supply N/A
Power
Requirements
12V Single Voltage Input
ATX circuit as AT mode
EMC & Safety
EMC CE, FCC Class B
Safety N/A
Revision: 1.1
3.1.3. Package Contents
Model Name Part Lists QTY Remark
AR-B6000
series
AR-B6000 series 1
14
3.1.4. Block Diagram
Revision: 1.1
15
Revision: 1.1
3.2. Hardware Information
This chapter describes the installation of AR-B6000. At first, it shows the Function diagram and
the layout of AR-B6000. It then describes the unpacking information that you should read carefully,
as well as the jumper/switch settings for the AR-B6000 configuration.
3.2.1. Location
3.2.1.1. Top Side
16
3.2.1.2. Bottom Side
Revision: 1.1
17
3.2.2. Connector, Header and Jumper Setting Table
Revision: 1.0
18
3.2.2.1. Pin definition for Connector
Item Connector NAME DESCRIPTION
DC_JACK1
Power Inlet
C1
ATX12V_1
Power input (CO lay with Power inlet)
Revision: 1.0
C2
C3
C4
C5
FAN1 , FAN2, FAN3
COM2
SATA_PWR1,SATA_PWR2
FAN connector*3 ( for CPU FAN*1, System FAN*2)
19
3.2.2.2. Pin definition for Header
Item HEADER NAME DESCRIPTION
F_PANEL
H1
Revision: 1.0
H2
H3
H4
LCM1
VGA1
GPIO1
USB34,USB56
H5
H6
CPLD_FH
20
3.2.2.3. Jumper Setting and Pin definition
Item JUMPER NAME DEFAULT DESCRIPTION
CLRTC 1-2 CLR CMOS
NORMAL (Default)
2-3 CLR CMOS
J1
Revision: 1.0
GPIOVS
1-2 GPIO Voltage selection
1-2 +V5 (Default)
2-3 +V3.3
J2
BP_SEL
2-3 Bypass selection
1-2 Bypass
2-3 NORMAL (Default)
J3
PSON
J4
2-3 ATX / AT Mode
2-3 AT Mode (Default)
3.2.2.4 DIP Switch Setting
Item SWITCH NAME DEFAULT DESCRIPTION
All ON CPLD setting
SW2
21
Revision: 1.0
3.3. BIOS Setting
3.3.1. Main (System Overview)
The BIOS setup main menu includes some options. Use the [Up/Down] arrow key to highlight
the option that you wish to modify, and then press the [Enter] key to select the item and configure
the functions.
3.3.2. Advanced (Advanced Settings)
The <Advanced > menu consists of configuration entries that allow you to improve your
system performance, or let you modify some system features according to your preference. Some
entries are required and reserved by the board’s design.
22
3.3.3. Power (ACPI Setting)
This option determines the configuration of power management.
Revision: 1.0
3.3.4. Boot (Boot Settings)
This option allows user to select sequence/priority of boot device(s).
23
3.3.5. Exit (Exit Options)
This option is use to exit the BIOS main menu and change password.
Revision: 1.0
24
3.4. Appendix
3.4.1. Appendix A - RJ45 LAN LED definition
Revision: 1.0
LED
LED Function LED Color On Off Blinking
Position
Left(LED2) Link/Activity Yellow Link No Link Link with
Activity
Orange 1000 Mbps Right(LED1) Data Speed
Green 100 Mbps
10 Mbps Not
Applicable
25
3.4.2. Appendix B- Front Panel LAN LED definition
Revision: 1.0
LED Position LED Function LED Color On Off
Upper 1000 Data
speed
Green Link with
No Link
1000Mbps
transferring
Middle 10/100Data
Speed
Green Link with
10 Mbps
100Mbps
transferring
Down Active Yellow LAN Active LAN not active
26
Revision: 1.0
3.4.3. Appendix C- Front Panel LED definition
LED Position LED Function LED Color On
Upper Power LED Green System powered on.
Middle HDD Green HDD is activating.
Down Bypass Yellow Bypass function enabled.
27
Revision: 1.0
28
Loading...