Page 1
Revision :1.1
AR-ES7230FL
Installation Guide
Revision Description Date
1.0 Release 2008/06/16
1.1 Modify 1-3 Main system 2009/06/16
1
Page 2
Revision :1.1
Contents
Introduction to AR-ES7230FL………………………………………..
1
1-1 Description……………………………………………………….…
1-2 Packing List…………………………………………………………
1-3 Main system……………………………………………………….
Procedure of Assembly/Disassembly……….………………………
2
2-1 Installing the 2.5”Hard Disk Drive(HDD)..……………………...
2-2 Installing CF card……………...….………………………....……
2-3 Installing SO-DIMM….……………………...……………....……
2-4 Installing PCI card..….……………………...……………....……
3
3
3
4
4
5
9
10
10
2
Page 3
Revision :1.1
1. Introduction to AR-ES7230FL
AR-ES7230FL is a system product mainly for ticket control, navigation, advertising, fleet
managements applications. With fanless & dust-proof design, AR-ES7230FL can satisfy
the user requirements in any application environment. AR-ES7230FL has diverse
physical interface in the front panel, such as pluggable CF card, KB/MS connector, USB
Ports, 10/100 LAN ports, VGA port, console ports, LVDS port, DVI port, Audio output,
External Switch Jack, Power Switch, Input Power connector. In addition, the system
provides the capacity for extending I/O device by adding DRAM, CF card depending on
the users needs.
1.1 Discrimination (included Rubber Foot)
Description AR-ES7230FL
CPU Board AR-B7230 series
Dimensions 251×165×67 (mm)
1.2 Packing List
Description Q’ty
AR-ES7230FL 1
Power Cord
HDD Cable
KB/MS Cable
Mounting bracket
1
1
1
2
Mounting bracket
Screw
4
CD
Quick Guide (AR-B7230)
1
1
3
Page 4
1.3 Main system
(1) Dimension
Revision :1.1
(2) Outlet (front side board)
4
Page 5
Revision :1.1
2. Procedure of Assembly/Disassembly
2-1 Installing the 2.5” Hard Disk Drive (HDD)
The following are step-by-step installation for 2.5”HDD device
1. Remove bottom door screws (2pcs) out from the system bottom case
Insert the rubbers into the HDD bracket for each four edges
5
Page 6
Revision :1.1
2. Lock HDD and Bracket together via screws (4pcs)
3. Plug the HDD wire-cable into the 44-pin header connectors in main board
(or SATA HDD Installation)
6
Page 7
Revision :1.1
4. Remove right side door screws (2pcs) out from the system bottom case
5. Route the HDD cable (for IDE HDD or SATA HDD) through the main
board
6. Back and lock right side door screws (2pcs) to the system bottom case
7
Page 8
Revision :1.1
7. Lock HDD bracket to the top case by four screws
8. Insert the HDD wire-cable into the HDD module
9. Lock the door screws to the system bottom case
8
Page 9
Revision :1.1
2-2 Installing CF card
The following are step-by-step installation for CF card
1. Remove screws (2pcs) out from the bracket of CF card
2. Install CF card to the bracket
3. Insert the CF card to the CF card expansion slot
4. Lock the bottom door screws
9
Page 10
Revision :1.1
2-3 Installing SO-DIMM
The following are sep-by-step installation for SO-DIMM
1. Remove the HDD device out from the system
2. Install the SO-DIMM module into the SO-DIMM socket
3. Re-cover the HDD device
4. Lock the bottom case Door screws
10
Loading...