Page 1
Revision: 1.0
AR-ES5890
Installation Guide
Revision Description Date
1.0 Release 2009/11/27
1
Page 2
Revision: 1.0
Content s
1 Introduction to AR-ES5890........................................................................ 3
1.1 Specifications........................................................................................................3
1.2 Packing List ..........................................................................................................3
1.3 System Dissection................................................................................................4
2 Procedures of Assembly/Disassembly.................................................... 7
2.1 Installing the DDR3 SO-DIMM..............................................................................7
2.2 Installing the CPU & FAN module........................................................................9
2.3 Installing the PCI-E 16X interface card.............................................................13
2.4 Installing the 2.5” Hard Disk Driver (HDD)........................................................16
2.5 Installing & take out the CF card.......................................................................19
2
Page 3
Revision: 1.0
1 Introduction to AR-ES5890
AR-ES5890 is a system product mainly for ticket control, navigation, advertising, and
fleet management’s applications. AR-ES5890 can satisfy user requirements in any
application environment. AR-ES5890 has diverse physical interfaces in the front panel,
such as VGA port, audio output,10/100 LAN connectors, 5 USB Ports, DVI-D port, power
switch, external switch jack and PCI slot. The system provides the capacity for extending
I/O device by adding 2 SO-DIMM DDR3, CF card depending on user needs.
1.1 Specifications
Item Description
System AR-ES5890
CPU Board AR-B5890
System Dimensions 310*210*80(mm)
1.2 Packing List
Description Quantity
AR-ES5890 1
Mounting bracket
Software driver CD
Quick user’s manual
2
1
1
Screw pack
SATA power cable
Power cord
SATA cable
1
1
1
1
3
Page 4
Revision: 1.0
1.3 System Dissection
(1) Dimensions
(2) Front Panel
PCI-E 16X SLOT LAN
Thumb screws
PCI SLOT(COM6 default)
Power Inlet
Switch USB 1~5 VGA DVI-D
4
COM 1~5
Audio
Page 5
Revision: 1.0
(3)System Configuration
1
2
3
4
5
7
8
9
10
6
11
5
Page 6
Revision: 1.0
Item Description Quantity
1 TOP COVER 1
2 BOTTOM BASE 1
3 POWER SUPPLY 1
4 WIFI MODULE 1
5 ANTENNA 1
6 MOUNTING BRACKET 2
7 HDD BRACKET 1
8 FAN 1
9 RISER CARD & BRACKET 1
10 AR-B5890 MAIN BOARD 1
11 CF BRACKET 1
6
Page 7
Revision: 1.0
2 Procedures of Assembly/Disassembly
2.1 Installing the DDR3 SO-DIMM
1. Loose two thumb screws of chassis top cover counterclockwise to open the cover.
Counterclockwise
2. Align the notch key on DDR module with the rib on the slot.
7
Page 8
Revision: 1.0
3. Firmly press modules into the socket.
8
Page 9
Revision: 1.0
2.2 Installing the CPU & FAN module
1. Confirm arrow of the knob of CPU socket turn toward the unlock sign before putting on
CPU.
2. Aim the triangle mark of CPU at socket of left lower corner and then put the CPU on
socket.
9
Page 10
Revision: 1.0
3. Lock CPU by turning the socket knob clockwise with screw driver
4. Take off the paper from fan module.
10
Page 11
Revision: 1.0
5. Then put fan module upon the CPU.
6. Fasten four screws of fan module with screw driver.
11
Page 12
Revision: 1.0
7. Plug in the fan connector to main board.
12
Page 13
Revision: 1.0
2.3 Installing the PCI-E 16X interface card
1. Unfasten two screws with screw driver.
2. Take out the bracket and unfasten the screw
13
Page 14
Revision: 1.0
3. Take off the original L type bracket. Assemble the new interface card and fasten the
screw.
4. Slide interface card into the PCI-E 16X slot.
14
Page 15
Revision: 1.0
5. Confirm the interface card is locked by hook of PCI-E 16X slot.
6. Fasten two screws to fix the bracket & interface card.
15
Page 16
Revision: 1.0
2.4 Installing the 2.5” Hard Disk Driver (HDD)
1. Put the HDD on the bracket of top cover.
2. Fasten four screws with screw driver.
16
Page 17
Revision: 1.0
3. Connect the SATA cable & power cable to the HDD.
4. Connect the SATA & power cable to the main board.
17
Page 18
Revision: 1.0
5. Finally, close the top cover and fasten clockwise the two thumb screw.
18
Page 19
Revision: 1.0
2.5 Installing & take out the CF card
1. Unfasten the screw and open the CF bracket.
2. Insert the CF card into the CF socket.
19
Page 20
Revision: 1.0
3. Push “push pin” then CF card will be released.
4. Pull the CF card straight out as shown below.
5. Close the CF bracket and fasten it with screw.
20
Loading...