Page 1
Revision: 1.1
AR-ES5630FL
Installation Guide
Revision Description Date
1.0 Release 2008/07/04
1.1 Modify 1-3 Main system 2009/06/16
1
Page 2
Revision: 1.1
Contents
Introduction to AR-ES5630FL………………………………………..
1
1-1 Description…………………………………………………………
1-2 Packing List………………………………………………………..
1-3 Main system……………………………………………………….
Procedure of Assembly/Disassembly……….………………………
2
2-1 Installing the 2.5”Hard Disk Drive (HDD)..………………………
2-2 Installing CF card……………...….………………………....……
2-3 Installing SO-DIMM….……………………...……………....…….
3
3
3
4-5
6
6-9
10
11
10
2
Page 3
Revision: 1.1
1. Introduction to AR-ES5630FL
AR-ES5630FL is a system product mainly for ticket control, navigation,
advertising, fleet managements applications. With fan less & dust-proof design,
AR-ES5630FL can satisfy the user requirements in any application environment.
AR-ES5630FL has diverse physical interface in the front panel, such as plug
gable CF card, KB/MS connector, 2 USB Ports, 2 10/100 LAN ports, VGA port,
4pcs console ports, LVDS port, DVI port, Audio output, External Switch Jack,
Power Switch and Input Power connector. In addition, the system provides the
capacity for extending I/O device by adding DRAM, CF card depending on users
needs.
1.1 Discrimination
Description AR-ES5630FL
CPU Board AR-B5630 series
Dimensions 251×165×67 (mm)
1.2 Packing List
Description Q’ty
AR-ES5630FL 1
Power Cord 1
HDD Cable 1
KB/MS Cable 1
Mounting bracket 2
Mounting bracket Screw 4
CD 1
Quick Guide (AR-B5630) 1
3
Page 4
1.3 Main system
(1) Dimension
Revision: 1.1
(2) System Configure
4
Page 5
Revision: 1.1
MOUNTING_BRACKET
HDD_BRACKET
CF_BRACKET
HDD_WASHER
HDD_SCREW
PCB_BRACKET
HEAT_SINK
AR-B5630_V1.0
AR-B9427A_V1.0
WIRELESS_LAN
DIMM_BRACKET
BOTTOM-CASE
FRONT-CASE
TOP_COVER
BASE_COVER
5
Page 6
Revision: 1.1
2. Procedure of Assembly/Disassembly
2-1 Installing the 2.5” Hard Disk Drive (HDD)
The following are step-by-step for installing 2.5”HDD device
1. Remove bottom door screws (2pcs) out from the system bottom case
Insert the rubbers into the HDD bracket for each edge
6
Page 7
Revision: 1.1
2. Lock HDD and the HDD holder together via screws (4pcs)
3. Plug the HDD cable into the 44-pin header connectors of the main board
7
Page 8
Revision: 1.1
4. Remove right side door screws (2pcs) out from the system bottom case
5. Route the HDD cable through and pass the main board to the upper side
for the HDD module
6. Lock right side door screws (2pcs) in system bottom case
8
Page 9
Revision: 1.1
7. Lock the HDD holder to the top case by four screws
8. Insert HDD cable into the HDD module
9. Lock the door screws in system bottom case
9
Page 10
Revision: 1.1
2-2 Installing CF card
The following are step-by-step for installing CF card
1. Remove screws (2pcs) out from the CF card bracket
2. Install the CF card to the bracket
3. Insertion the CF card module to the CF card expansion slot
4. Lock the bottom door screws
10
Page 11
Revision: 1.1
2-3 Installing SO-DIMM
The following are step-by-step for installing SO-DIMM
1. Remove the HDD holder out from the system
2. Remove screws (2pcs) of the DIMM bracket
3. Install the SO-DIMM into the SO-DIMM socket
4. Re-Install the HDD holder
5. Lock the bottom case door screw
11
Loading...