Acoustic Research AWS-63 Owners Manual
Wireless audio transmitter
Signal Power
DC IN
CHANNEL
1 2 3
R AUDO L
IN
P
Bass Boost
On / Off
Auto Scan
Volume +
Volume -
Introduction
The Acoustic Research Portable Wireless Speaker with 3.5mm jack lets you enjoy your music
anywhere, at home or on the go, with two ways to connect to your music. The 900MHz wireless
transmitter gives you 150ft* of room to roam from your audio source, great for outdoor
entertaining at home, with crystal-clear wireless audio. The speaker’s 3.5mm jack offers
a convenient connection option to use anywhere you go—just connect your MP3 player or
smartphone to the speaker, and enjoy!
This manual covers various connection options and detailed operating instructions for making
the AR Wireless Speaker System a valued part of your lifestyle. If, after having reviewed the
instructions, you have any questions, please call toll-free 1-800-732-6866 or visit
www.acoustic-research.com.
*Range may vary according to environment.
Important Information
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user
i[hl_Y[WXb[ fWhji _di_Z[$ H[\[h i[hl_Y_d] je gkWb_Ó[Z i[hl_Y[ f[hiedd[b$
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the
serial and model numbers in case you need them. These numbers are located on the product.
Model No.: _____________________________________________________________________________________________
Purchase Date: _________________________________________________________________________________________
Dealer/Address/Phone: __________________________________________________________________________________
Important Safety Instructions
1. Read th ese instruct ions.
2. Keep these instru ctions .
3. Heed all warnings.
4. Fol lo w al l in st ru ct io ns .
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-$ :edej _dijWbb d[Wh Wdo ^[WjiekhY[i ikY^ Wi hWZ_Wjehi"^[Wj h[]_ij[hi" ijel[i"eh ej^[h WffWhWjki _dYbkZ_d]Wcfb_Ó[hij^Wj
produce heat.
8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
9. Unplug this apparatus during lightning storms or when unused for long periods of time.
'&$ H[\[h Wbb i[hl_Y_d]je gkWb_Ó[Z i[hl_Y[ f[hiedd[b$I[hl_Y_d] _i h[gk_h[Zm^[d j^[ WffWhWjki ^WiX[[d ZWcW][Z _d Wdo
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Care and Maintenance
7bmWoi ki[ W ie\j Ybej^ je Yb[Wd j^[ if[Wa[h WdZ jhWdic_jj[h$ D[l[hki[ Wdo fheZkYj YedjW_d_d] WbYe^eb eh ej^[h iebl[dji
as they may damage the surface.
Ki[ YWkj_ed m^[d fbk]]_d] j^[ fem[h jhWdi\ehc[hi _d Wd 79 ekjb[j je Wle_Z j^[ h_ia e\ [b[Yjh_Y i^eYa$
?\ j^[ if[Wa[h Wh[ ki[Z ekji_Z[ ed W Z[Ya eh fWj_e" cWa[ ikh[ oek jWa[ j^[c _dZeehi _d j^[ [l[dj e\ W hW_dijehc je
prevent possible damage.
:e dej ef[hWj[ eh ijeh[ j^[ ioij[c _d [njh[c[ j[cf[hWjkh[i X[bem )(±<%&±9 WdZ WXel[ '((±<%+&±9$
Je Wle_Z [b[Yjh_YWb i^eYa" ki[ j^_i fheZkYj m_j^ YWkj_ed d[Wh mWj[h iekhY[i _\ fem[h[Z m_j^ j^[ 79 WZWfj[h$ D[l[h
submerge in water.
Tour of the Speaker System
Speaker
Front Panel
Power _dZ_YWjeh Xb_dai m^[d j^[ if[Wa[h _i Óhij
powered on; it turns solid blue when the speaker is
tuned to the transmitter
Side Panel
Bass Boost button turns the speaker’s bass
enhancement on and off
On/Off button turns the speaker on and off
Auto Scan button rescans for the transmitter’s
signal
Volume +/– buttons adjust the volume level
Bottom Panel
L/M/R switch determines if the speaker plays sound
in mono as a stand-alone speaker, or plays the left or
right track in a stereo pair with an additional AWS63
DC IN receives the small round end of the included
9V 1200mA AC power adapter; remove the
protective cover to insert the adapter
AUDIO IN connects directly to your MP3 player,
smartphone, or other portable audio device, using
the 3.5mm audio in cable provided
Battery Compartment Cover remove to install 6
AA batteries
Carrying handle
Transmitter
To p P an e l
Signal indicator lights green when the audio is
present and the transmitter is broadcasting
Power indicator lights when the transmitter is on
Back Panel
CHANNEL 1 2 3 b[ji oek ÓdZ j^[ X[ij jhWdic_ii_ed
frequency for your environment
DC IN jack receives the small round end of the
included 12V 200mA AC power adapter
AUDIO IN (R / L) connects to your sound source
using one of the connection options shown here
Model AWS63
Installation and Operation Manual
PORTABLE
Wireless
Speaker
W
ITH 3.5MM JACK
Tour of the Speaker System
Included Accessories
Note: These power units should be
plugged in so that they stay vertical
eh b_[ ÔWj$
Connecting the Speaker System
Connecting the Speaker System
Powering the Transmitter
Connect the small, round plug from the transmitter AC
power adapter to the transmitter’s DC IN jack. Plug the
other end of the transmitter AC power adapter into any
standard 120V AC wall outlet.
Note: Be sure to use the AC power adapter rated 12V DC
200 mA (it has the smaller diameter plug).
Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged
in and powered at all times. If you will not be using the AWS63 for an extended period of time,
unplug the transmitter AC power adapter.
AC Power Adapters
1. Insert the small, round plug from the speaker AC
power adapter into the DC IN jack on the bottom of
the speaker.
2. Plug the other end of the speaker AC power adapter
into any standard 120V AC wall outlet.
Note: Be sure to use the speaker AC power adapter rated 9V DC 1200 mA.
Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet
environments, such as rain, mist, dew, etc. In other words, you can take it out, just don’t leave it out.
If you plan to use the speaker in a humid or wet environment, we recommend powering it with
batteries instead of with the power adapter.
AA Batteries
1. Remove the battery compartment cover on the bottom of the speaker.
2. Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”)
as diagrammed inside the battery compartment.
3. Replace the battery compartment cover on the bottom of the speaker.
Note: Place the rubber cap in the speaker power input jack when using batteries.
DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline
battery).
DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when
not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or
dispose of them in accordance with local and national regulations.
Powering the Speaker
There are two options to power your wireless speaker: using the included AC power adapter or
using 6 AA batteries (not included).
1. Plug the stereo plugs on the provided Y-adapter
audio cable into the AUDIO IN jacks on the back of
the transmitter (make sure to match the colors on the
plugs and jacks).
2. Plug the mini-plug end of the provided Y-adapter into
a mini-jack to RCA adapter (not included).
3. Connect the stereo plugs on the mini-jack to RCA adapter to the corresponding left and right
audio outputs of your A/V receiver, amp, or other audio source.
Connecting to an Audio Source
Connecting to an MP3 player, smartphone, or other portable audio
device
This speaker offers two ways to listen to audio from a portable audio device: using the wireless
transmitter or connecting directly to the audio source.
Using the wireless transmitter
1. Plug the stereo plugs on the provided Y-adapter audio cable
into the AUDIO IN jacks on the back of the transmitter.
2. Plug the mini-plug end of the provided Y-adapter into the
headphone output of your MP3 player or other portable audio
device.
Using a direct connection
1. Connect one end of the provided 3.5mm audio in cable to the
AUDIO IN jack on the bottom of the speaker.
2. Connect the other end of the cable to the headphone output
on your MP3 player or other portable audio device.
Warning: This product is designed to work with line level outputs or headphone outputs only.
DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter.
Connecting to an A/V Receiver
Audio source
Speaker
(bottom panel)
3.5mm
audio in cable
3.5mm audio in cable
Using the Speaker System
2. Set the channel select switch on the back of the transmitter
to one of the transmitter’s three broadcast frequencies: 1,
2 or 3. If you experience poor reception or interference, try
choosing a different frequency by moving the channel select
switch to another position.
When the transmitter is receiving an audio signal and is
ready, the SIGNAL indicator turns solid green.
DC IN
CHANNEL
1 2 3
R AUDO L
IN
Channel
select
switch
Adjusting the Transmitter
1. Turn on your audio source (for example, A/V receiver, MP3 player, stereo, etc.) and play
music at a normal listening volume.
Note
If the SIGNAL indicator on the transmitter does not turn on, please check the following:
2^]a\ cWT caP]b\XccTa 02 _^fTa PSP_cTa Xb bTRdaT[h R^]]TRcTS
2^]a\ cWT RPQ[T Ua^\ cWT caP]b\XccTa Xb bTRdaT[h R^]]TRcTS c^ cWT PdSX^ b^daRT ^dc_dc
(MP3 player, A/V receiver, etc.).
2^]a\ cWT PdSX^ b^daRT Xb _[PhX]V PdSX^ P]S Xb cda]TS d_
Loading...