AC C6606 Pack Contents and Fitting Directions
Pack Contents:
The AcoustiCaseā¢ AC C6606 pack contains
15 pieces, of 3 different materials.
Acoustic Foam
Acoustic Barrier Mass
Acoustic Composite
15
10
Fitting Directions:
Fit according to the positions indicated, in the numerical order shown
15
1
from to . Where self adhesive is on the reverse of the materials,
remove the backing paper and adhere lightly to clean and dust-free
surfaces, making sure that the material is correctly positioned. If you
make a mistake - it can be re-applied for a second attempt - but be
aware that excessive re-application will cause a deterioration in the
adhesive. Once well positioned, press the materials firmly into place.
Ensure you read the important safety information before
installing the materials.
20mm
11
Opt
9
12
20mm
3
14
13
2
4
Opt
READ THIS BEFORE INSTALLING THE MATERIALS!
ONLY position the materials as directed in the fitting directions and as depicted in the graphics above.
DO NOT cover the ventilation holes at the rear of the case with any materials.
DO NOT position the rear of the case close to a permanent heat source, such as a radiator, or very close to an airflow obstruction,
such as a wall. This may inhibit air circulation required for cooling. Leave a gap at the rear of the case of at least 20cm to allow
free movement of air in and out of the case.
DO NOT position materials inside the case in such a way that may inhibit the correct functioning of any internal components,
especially cooling fans, disc drives and moving parts. These components require adequate space and ventilation. Whilst every care
has been taken to produce a set of templates that will be appropriate for the majority of component configurations, it is the
responsibility of the machine builder to position the materials appropriately to facilitate normal functioning of internal components.
1
Opt
The system speaker and
accompanying 80mm internal fan
bracket is an optional component.
The detachable portions indicated on
4
items and can be removed if an
internal fan is installed.
5
Opt
Opt
Opt
Opt
Opt
6
7
8
Optional
V 1.2
5