ACORN SAFETY S0860-RH User Manual
Model S0860-RH
Deck Mounted, Swing Down Eye/Face Wash
o Model: S0860-RH
Model S0860-RH is a deck mounted
swing down eye/face wash that is
installed behind the sink with ABS
plastic eye/face wash spray heads. The
eye/face wash swings down over the
sink from the rear and the water flow is
activated automatically. The eye/face
wash flow is terminated once the unit
has been swung back up into its original
position for storage.
Spray Head Assembly: ABS yellow
plastic eye/face wash heads with
integral flip dust covers, internal flow
controls and filters to remove debris
from the water. An anti-microbial agent
is molded into the ABS material,
providing integrated protection.
Valve: Swing down valve is mounted
behind the sink on the countertop and
has a 50 mesh inline strainer.
Water Supply: 1/2" NPT female
threaded brass inlet.
Mounting: Deck mounted, 304 stainless steel valve housing.
Universal Sign: ANSI compliant,
vertical identification sign.
Weekly Test Tag: A water proof test
card to record the date and inspector's
name for weekly functional testing of the
unit.
Additional costs may be incurred
o -AS All stainless steel
o -ET71-1-BVS-OTG Thermostatic mixing valve is ASSE Listed per
the ASSE 1071 standard. The tepid output water
complies with ANSI Z358.1 standard. Valve
includes Ball Valve Shut-offs and Outlet
Temperature Gauge
o -FLW2 Flow switch, single pole
o -LH Left hand mounting (Use model S0860-LH)
o -SDC Stainless steel dust covers
sink not included
Member of
U.S. Green
Building Council
Acorn Safety assumes no responsibility for use of void
or superseded data. © Copyright Acorn Safety , City of
Industry, CA, Division of Acorn Engineering Company ,
Member of Morris Group International™. Please visit
www.acorneng.com for most current specifications.
Submittal # S0860-RH
[EFW] Revised: 07/21/17
Recyclable
Product
®
Product carries the
following certifications:
®
Test rating conditions are compliant to ANSI Z358.1
Division of
Acorn Engineering Company ,
Member of
Morris Group International™
ACORN SAFETY
P.O. Box 3527
City of Industry, CA
91744 U.S.A.
Phone 800-591-9372
®
www.acorneng.com
626-855-4804
All dimensions are subject to manufacturer’s tolerance of plus or minus 1/2” nominal and subject to change without notice. Acorn Safety assumes no responsibility for use of void or superseded
data. Dimensions may change with the addition of optional accessories. © Acorn Safety , A Division of Acorn Engineering Company , Member of Morris Group International™. Please visit
www.acorneng.com for most current specifications.
® ®
®
o Model S0860-RH : Deck Mounted, Swing Down Eye/Face Wash
1
1
"
4
[30]
3
17
"
4
[450]
BASIN AND COUNTER TOP
SHOWN FOR REFERENCE
7
4
"
8
[125]
3
1
4
[45]
"
100°
1/2" NPTE
SUPPLY INLET
*33" - 45"
[838 - 1143]
S0860-RH
GENERAL NOTES:
1. ALL DIMENSIONS ARE INCHES [MM].
*2. ANSI Z358.1 REQUIRES NOZZLES TO BE MOUNTED BETWEEN 33" - 45" [838 - 1143]
ABOVE THE FINISHED FLOOR.
3. RIGHT HAND MODEL SHOWN. LEFT HAND MODELS AVAILABLE.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
S0860-RH Revised: 07/21/17
Acorn Safety warrants that its products are free from defects in material or workmanship under normal use and service for a period
of one year from date of shipment. Acorn’s liability under this warranty shall be discharged solely by replacement or repair of
defective material, provided Acorn is notified in writing within one year from date of shipment, F.O.B. Industry, California.
Model Number & Options_____________________________________________________________________Quantity_______________
Company_______________________________________________________________________________________________________
Contact_________________________________________________Title____________________________________________________
Signature
& APPROVAL FOR
MANUFACTURING
(Approval for
Manufacturing)__________________________________________________________________Date ____________________________
SELECTION SUMMARY
800-591-9372
or 626-855-4804
www.acorneng.com
Loading...