Acomdata PS-HDEXXU2FE3 User Manual
Windows
Microsoft
Hard Drive
Enclosure
For 3.5" IDE hard drives
Build your own high-performance external hard drive with an AcomData
2163 USB 2.0 & FireWire External Hard Drive Enclosure. The 2163
features: a lightweight aluminum alloy case; horizontal or vertical placement;
quiet, fanless operation; hot plug capability; and a chassis design that makes
installing an IDE hard drive quick and easy.
EASY INSTALLATION
With the simple, fully illustrated instructions in the user's guide, installation is
quick––and easier than you might think.
HORIZONTAL OR VERTICAL
Either way, with this compact enclosure
you need only the smallest patch of desk-
top real estate to store
mountains of data.
HOT PLUGGABLE
With your computer running you can:
connect or disconnect the Drive for quick
portability; turn the Drive off when you’re
not using it.
NEAR-SILENT FANLESS DESIGN
The aluminum
alloy case dissipates heat
so efficiently
it doesn’t need
a fan, for nearsilent operation.
PLUG & PLAY
Once your 3.5" IDE drive is installed, in
most cases you simply need to connect the
interface cable and plug in the AC adapter
and power cord.
SYSTEM REQUIREMENTS
• PC with minimum 233MHz Pentium or
equivalent (Celeron, AMD etc), running
Windows XP, 2000, Me or 98SE
• Mac running Mac OS 9 or OS X
• Available USB 2.0* port or
6-pin FireWire port
PACKAGE CONTENTS
• AcomData 2163 Enclosure
• USB cable
• 6-to-6 pin FireWire cable
• USB 2.0 Driver CD
(needed for Windows 98SE only)
• AC adapter and power cord
• Rubber feet
• Comprehensive, printed User’s Guide
• Warranty Registration Card
SPECIFICATIONS
Model# .................................HDEXXU2FE3
Dimensions:
(inches) .......................... 5.3” X 1.5” X 8.8”
(mm) .......................134.6 X 38.1 X 223.5
Weight ............................780 g / 1.72 lbs.
Interface transfer rate (max.)
USB 2.0 .................................480 Mbps
FireWire 400 .........................400 Mbps
Chassis (approved/recognized) FCC/CE/UL
Startup current (max.) ........... 2.0 A (12V)
Idle ..................................................4.9 W
External Power Supply ......40W switching
UL/CSA/CE
AC Input ......... 100-240V~, 50/60Hz 1.5A
DC output ..............12V@3.33A 40W max.
Amb. temperature (operating) 5ºC – 55ºC
Rel. humidity (non-cond.) ....... 8% – 90%
* YOU CAN CONNECT THE DRIVE TO A USB 1.1 PORT, HOWEVER IT WILL OPERATE AT USB 1.1 SPEEDS (UP TO 12 MBPS).
©2005 ACOMDATA. ALL RIGHTS RESERVED. THE ACOMDATA NAME AND ITS LOGOS ARE REGISTERED TRADEMARKS OF ACOMDATA.
ALL OTHER TRADEMARKS AND LOGOS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. PRICES AND SPECIFICATIONS ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
www.acomdata.com
Loading...