Acomdata PS-HDEXXU2E3 User Manual

Windows

Microsoft

Hard Drive

Enclosure

For 3.5" IDE hard drives

Build your own high-performance external hard drive with an AcomData 2163 USB 2.0 Hard Drive Enclosure. The 2163 features: a lightweight aluminum alloy case; horizontal or vertical placement; quiet, fanless operation; hot plug capability, and; a chassis design that makes installing an IDE hard drive quick and easy.

EASY INSTALLATION

With the simple, fully illustrated instructions in the user's guide, installation is quick––and easier than you might think.

HORIZONTAL OR VERTICAL

Either way, with this compact enclosure you need only the smallest patch of desk-

top real estate to store mountains of data.

HOT PLUGGABLE

With your computer running you can: connect or disconnect the Drive for quick portability; turn the Drive off when you’re not using it.

NEAR-SILENT FANLESS DESIGN

The aluminum alloy case dissipates heat so efficiently it doesn’t need a fan, for nearsilent operation.

PLUG & PLAY

Once your 3.5" IDE drive is installed, in most cases you simply need to connect the USB 2.0 cable and plug in the AC adapter and power cord.

SYSTEM REQUIREMENTS

• PC with minimum 233MHz Pentium or equivalent (Celeron, AMD etc), running Windows XP, 2000, Me or 98SE

• Mac running Mac OS 9 or OS X

• Available USB 2.0* port

PACKAGE CONTENTS

• AcomData 2163 Enclosure

• USB cable

• USB 2.0 Driver CD

(needed for Windows 98SE only)

• AC adapter and power cord

• Rubber feet

• Comprehensive, printed User’s Guide

• Warranty Registration Card

SPECIFICATIONS

Model# ...................................HDEXXU2E3

Dimensions:

(inches) ....................... 5.3” X 1.5” X 8.8”

(mm) ....................134.6 X 38.1 X 223.5

Weight ............................780 g / 1.72 lbs.

Interface transfer rate (max.) ....480 Mbps

Chassis (approved/recognized) FCC/CE/UL

Startup current (max.) ........... 2.0 A (12V)

Idle ..................................................4.9 W

External Power Supply

.................... 40W switching UL/CSA/CE

AC Input ......... 100-240V~, 50/60Hz 1.5A

DC output ..............12V@3.33A 40W max.

Amb. temp. (operating) ..........5ºC – 55ºC

Rel. humidity (non-cond.) ....... 8% – 90%

* YOU CAN CONNECT THE DRIVE TO A USB 1.1 PORT, HOWEVER IT WILL OPERATE AT USB 1.1

SPEEDS (UP TO 12 MBPS).

TRADEMARKS OF ACOMDATA. ALL OTHER TRADEMARKS AND LOGOS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

www.acomdata.com