
SPECIFICATIONS .......................................................... 1
NOMENCLATURE ......................................................... 1
FUNCTION KEYS .......................................................... 2
DISPLAY ........................................................................ 2
UNPACKING & ASSEMBLY ........................................... 3
SAFETY PRECAUTIONS ............................................... 4
OPERATING THE SCALE .............................................. 4
TROUBLESHOOTING & ERROR MESSAGES ............. 7
PREFACE
TABLE OF
NTENT
A
COM
Advanced Bench scale. We are committed to creating high quality low
maintenance products and supplying our customers with diligent customer
service. This manual contains information on the proper assembly and use
of the scale.
Brand and product names are trademarks and/or registered
trademarks of their respective companies.
Corporation would like to thank you for purchasing our model SI-1
Disclaimer:
This company makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties of merchantability or fitness
for any particular purpose. Any software described in this manual
is sold or licensed “as is”. Should the programs prove defective
following their purchase, the buyer (and not this company, its
distributors, or its dealers) assumes t he entire cost of all necessary
servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Further, this company
reserves the right to revise this publication and to make changes
from time to time in the contents hereof without obligation to notify
any person of such revision or changes.

pecifications
Maximum Capacity: 150 lb (60 kg) 300 lb (150 kg)
Minimum Graduation: 0.05 lb (0.02 kg) 0.1 lb (0.05 kg)
Maximum Tare: Full Capacity
External Resolution: 1/3,000
A/D Conversion Rate: 9 Updates / second (adjustable)
Units & Modes: pounds, kilograms, counting mode, limit mode
Model:
VFD Display: 6 Digits, 999999 max
Platter Size:
Product Dimensions:
Power Requirements:
Operating Temp:
Humidity RH 35% ~ 85%(no condensation)
Power consumption Approximately 1.4 Watts
SI-1
Width: 400 mm (15.7”)
Depth: 525 mm (20.5”)
Width: 400 mm (15.7”)
Depth: 675 mm (26.6”)
Height: 850 mm (33.5”)
Input: 120 Volts AC, @ 60 Hz
Output: 9 Volts DC, 300 mA
-10° C ~ 40°C
14° F ~ 104° F
Nomenclature
1