Document reference : NOTXXXX –_December 2014_A(MXX_NOT_16_A)
Name : EAGLE Safety instruction
This document is the property of 01dB-Metravib SAS. Any dissemination, copying or publicising of this document, in whole or in
www.acoemgroup.com
support@acoemgroup.com
Copyright © 2014 - 01dB-Metravib SAS
part, is prohibited without the owner’s written authorisation
Table of contents
Chapter 1 Safety instructions 3
1. Symbols for sensors, expander and gateway .............................................................................................................................. 3
2. Sensors and expanders ............................................................................................................................................................... 4
2.1. Identification ............................................................................................................................................................................ 4
2.2. Installation / disassembly ........................................................................................................................................................ 4
2.3. Hazardous environments ........................................................................................................................................................ 5
2.4. Primary cell ............................................................................................................................................................................. 6
2.5. Storage ................................................................................................................................................................................... 6
2.6. Transportation......................................................................................................................................................................... 6
3. Gateway ....................................................................................................................................................................................... 7
3.1. Identification ............................................................................................................................................................................ 7
3.2. Installation / disassembly ........................................................................................................................................................ 7
3.3. Hazardous environments ........................................................................................................................................................ 7
3.4. Connections ............................................................................................................................................................................ 7
3.5. Storage ................................................................................................................................................................................... 7
4. Power over Ethernet .................................................................................................................................................................... 8
5. General ........................................................................................................................................................................................ 8
5.1. Devices integrity ..................................................................................................................................................................... 8
5.2. Operating environment ........................................................................................................................................................... 8
5.3. Maintenance, service and modifications................................................................................................................................. 8
5.4. Certifications data ................................................................................................................................................................... 8
5.5. FCC and IC ............................................................................................................................................................................. 9
5.6. Dismantling / recycling .......................................................................................................................................................... 10
6. ANNEX: Summary of marking meaning for hazardous areas ................................................................................................... 10
Chapter 2 Instructions de sécurité 11
1. Symboles sur les capteurs, répéteur et gateway ....................................................................................................................... 11
2. Capteurs et répéteur. ................................................................................................................................................................. 12
2.1. Identification .......................................................................................................................................................................... 12
2.2. Installation / démontage ....................................................................................................................................................... 12
2.3. Atmosphère explosives ........................................................................................................................................................ 13
2.4. Pile ........................................................................................................................................................................................ 14
2.5. Stockage ............................................................................................................................................................................... 14
2.6. Transport .............................................................................................................................................................................. 14
3. Gateway ..................................................................................................................................................................................... 15
3.1. Identification .......................................................................................................................................................................... 15
3.2. Installation / démontage ....................................................................................................................................................... 15
3.3. Atmosphères explosives ....................................................................................................................................................... 15
3.4. Connections .......................................................................................................................................................................... 15
3.5. Stockage ............................................................................................................................................................................... 15
4. Alimentation par le câble Ethernet (Power over Ethernet .......................................................................................................... 16
5. Informations Générales .............................................................................................................................................................. 16
5.1. Etat général .......................................................................................................................................................................... 16
5.2. environnement opérationnel ................................................................................................................................................. 16
2
5.3. Maintenance, service and modifications............................................................................................................................... 16
5.4. Certifications data ................................................................................................................................................................. 16
5.5. FCC and IC ........................................................................................................................................................................... 17
5.6. Démontage / Recyclage ....................................................................................................................................................... 18
6. ANNEXE: Résumé du sens des marquages pour les atmosphères explosives........................................................................ 18
www.acoemgroup.com
support@acoemgroup.com
This document is the property of 01dB-Metravib SAS. Any dissemination, copying or publicising of this document, in whole or in
Copyright © 2014 - 01dB-Metravib SAS
part, is prohibited without the owner’s written authorisation
Chapter 1
Refer to the safety Instruction and the user manual
Refer to dismantling / recycling chapter
Refer to the copy of the EC certificate for model
EGL1102000, EGL1103000 and EGL1104000
Product intended for explosive atmospheres. Refer to
the hazardous environments instructions in the user
manual
Refer to battery installation recommendations
Refer to installation / disassembly for hazardous
environments
Symbol representing the Eagle Gateway
Symbol representing the Eagle Sensors
Symbol representing the Eagle Expander
Trademarks
Product and company names mentioned herein are trademarks or trade names of their respective companies.
SAFETY INSTRUCTIONS
1. SYMBOLS FOR SENSORS, EXPANDER AND GATEWAY
Table 1: symbols appearing on Eagle devices
The safety instructions delivered should be carefully followed and the devices should
always be used within the limits specified here.
www.acoemgroup.com
support@acoemgroup.com
This document is the property of 01dB-Metravib SAS. Any dissemination, copying or publicising of this document, in whole or in
part, is prohibited without the owner’s written authorisation
Copyright © 2014 - 01dB-Metravib SAS
4
2. SENSORS AND EXPANDERS
2.1. IDENTIFICATION
Table 2: sensors and expander part numbers
2.2. INSTALLATION / DISASSEMBLY
During installation or disassembly of Eagle devices, the operator must wear the prescribed
PPE (Personal Protective Equipment), respect the regulations in force and have the
necessary clearances.
WARNING: In hazardous environments, the operator has to arrange organizational safety
measures which reliably prevent the occurrence of an ignitable atmosphere, by default
reduce the probability that a flammable atmosphere can occur at all (employing the use of
suitable gas detection systems).
A damp cloth should be used when installing or taking off the sensors and expanders in all
hazardous areas to eliminate static electricity resulting from this operation.
Only use the dedicated tube wrench to fasten or unfasten sensor/expander.
Only use your hands or a rubber strap wrench to remove the protection tube from the
sensor/expander. The use of tongue-and-groove pliers (also known as water pump pliers,
adjustable pliers, groove-joint pliers, arc-joint pliers, Multi-Grips, and Channellocks) are
forbidden and will cause damages and lose of sealing IP67.
CAUTION:
Do not grasp the sensor by the plastic cap.
Do not hit the plastic cap.
Do not tighten the sensor by the plastic cap
Figure 1 : sensor installation tools
www.acoemgroup.com
support@acoemgroup.com
Copyright © 2014 - 01dB-Metravib SAS
This document is the property of 01dB-Metravib SAS. Any dissemination, copying or publicising of this document, in whole or in
part, is prohibited without the owner’s written authorisation