KDM8270
1U Rackmount LCD Keyboard Drawer
© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
User Manual
KDM8270: 1U Rackmount Dual Slide 17” 1920x1080 Full HD
Industrial Monitor Keybo ard Drawer
KDM8270
1U Rackmount LCD Keyboard Drawer
© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from
the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
KDM8270
1U Rackmount LCD Keyboard Drawer
© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
< Part. 1 >
KDM8270
1.1 Package Content
Contents
P.1
1.2 Structure Diagram & Dimension
1.3 Installation
1.4 Connection
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 Keyboard / Mouse Specifications
2.3 On-screen Display Operation ( OSD )
< Part. 3 > Options
3.1 3G / HD / SD-SDI Broadcast-grade input
P.1 - 2
P.3 - 5
P.6 - 7
P.8 - 9
P.10 - 12
P.13 - 14
P.15
3.2 HDMI, S-Video + BNC & Audio
3.3 48V, 24V or 12VDC power
P.16
P.17
KDM8270
1U Rackmount LCD Keyboard Drawer
© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, pleas e follow these steps :
1
Dis connect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To rem ove tough m arks and smudges, please follow these steps :
1
Disconnect the power cord.
2
Spray a small amount of non-abrasive clea nser on a microfiber cloth.
Cauti on : Do not spra y or apply any liquids directl y onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is com pletely dry before plugging it in and powering it up.
6
7
8
9
1 Carry handle to release the 2-pt lock
6
Audio speaker ( for HDMI or Audio optio n )
2 LCD interchange able mo dule kit
7
Keyboard interchang eable module kit
3 Installation Slides
8
Touchpad mouse module
< Part 1 >
< 1.1 > Package Content
< 1.2 > Structure Diagram
5
1
2
3
4
5
KD M8 270 unit X1
- 6ft DVI-D console cable X 1
( Altern ative : CB-6 6ft VGA co nsole cable )
- Pow er c ord X 1
- M6 screw, c age nut & cu p washer X 8
The above package content is only for the single console models.
It varies with opt ions such as KVM, SDI, HDMI, AV, Audio & DC power.
L CD membrane
4
Membrane switch (KVM option)
5
1U dual slide for LCD console drawer
9
< 1.2 > Dimension
Model
Product
Dimension
(W x D x
H)
Packing
Dimension
(W x D x
H)
Net
Weight
Gross
Weight
KDM 8270
441.6 x 650 x 44 mm
17.4 x 25.6 x
1.73"
595 x 860 x 140 mm
23.4 x 33.9 x
5.5”
13 kg
29 lb
18 kg
40 lb
Front View
Sid e View
Top View
UNIT : mm
1mm = 0.03937 inch
The weight is only for the single console models. It varies with accessories & options
such as KVM , SDI, HDMI, AV, audio & DC power.
< 1.3 > Installation - How to install Installation Slides
Step
1
¦ Insert the left and right rear mounting brackets into
the LCD c onsole drawer.
Step
2
¦ Measure the depth of the front and rear mounting rails.
¦ Align each rear mounting bracket to a suitable length.
Step
Complete the installation
3
¦ Fix the LCD console drawer into the rack .
M6 screw, cage nut & cup washer x 8 are provided.
< 1.3 > Installation - How to Use the Dual Slides
¦ Press the handle button and gently slide out
the drawer.
¦ Flip up the LCD to a suitable angle.
¦ Operate the LCD console drawer.
< 1.3 > Installation - How to Use the Dual Slides
¦ Flip down the front panel.
¦ Press the handle button and gently push
back the drawer into the rack .
¦ Retur n the LCD console drawer to park
position.
< 1.4 > Connection to
USB Server
via CX-6 cable
D
LCD Console Drawer
Power DVI-D KVM
CX-6 DVI-D
console cable
USB server
< 1.4 > Connection to external KVM via CX-6 cable
LCD Console Drawer
USB VI-D
DVI-D USB
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
Power DVI-D KVM
CX-6 DVI-D
console cable
DVI console KVM
servers and KVM are powered on may cause irreversible dam age to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
VGA
Power
KVM
CB-6 VGA
console cable
USB
VGA
USB server
< 1.4 > Connection to USB Server via CB-6 cable
< 1.4 > Connection to external KVM via CB-6 cable
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, m ay not be hot-pluggable. Plugging and unplugging cables while
LCD Console Drawer
LCD Console Drawer
Power KVM
USB
CB-6 VGA
console cable
USB console KVM
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console dr awer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
LCD
Panel
Panel Size ( diagonal )
17.3-inch Widescreen TFT color LCD
Display pix el ( dots x lines )
1920 x
1080
Brightness ( typ. )
300
Contras t Ratio ( typ. )
600:1
Color
1.07 Billion,
10-bit
Viewing Angle ( L/R/U/D )
89/89/89/89
Response Tim e ( ms )
35
Dot pitch ( mm )
0.199
Display Ar ea ( mm )
381.9H x
214.8V
Surface treatment
Anti- glare, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
20,000
Video
Connectivity
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
Analog
VGA
Analog 0.7Vp-p
Com posite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio
Connectivity
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30k Ω / 750mV
Audio Output
Connector
3.5mm stereo jack
Resistance / Power level
30k Ω / 2.8V
Speaker Output
Power
2 x 2W
Power
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consum ption
Screen display ON
34W or less
Power s aving m ode
4W or less
Power button OFF
1W or less
KDM8270
1U Rackmount LCD Keyboard Drawer
< Part 2 >
< 2.1 > Product Specifications
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
*When the audio output is connected, speaker output is OFF
© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
Environmental
Conditions
Operating
Tem peratur e
0 to 50°C degree
Humidity
20~90%, non-condensing
Storage
Tem peratur e
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
Product ( W x D x H )
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch
Packing ( W x D x H )
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
Net Weight
13 kgs / 29
lbs
Gross Weight
18 kgs / 40
lbs
Applicable
Format
DVI-D / VGA Input
PC Signal
1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
KDM8270
Regulatory Safety Approval FCC & CE
1U Rackmount LCD Keyboard Drawer
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle tim e
Software support
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
< 2.2 > Keyboard / Mouse Specifications
Ge
G keyboard integrated with touchpad
Supporting layouts
America
EMEA
United States
United Kingdom Germany France Spain
Asia
Norway
Italy Russia Switzerland Netherlands Portugal
China Japan Korea Arabia
Turkey
F 7 F8
< 2.2 > MAC Keyboard / Mouse Options
Me MAC k eyboard integrated with touchpad
Supporting layouts
America
United States
How to Use "MAC" Keyboard
K eyboard Fea tures
F1
Decrease d isplay brightness
F2
Increase display brightness
F3
Mission control
* Only works with OS X Lion
default Keyboard Sho rtcuts.
F4
Dashboard
F7
Rewind Eject disc
F8
Play / Pause Command
F9
Fast-forward
F10
Mu te sound
F11
Decrease volume
F12
Increase volume
Nu m Ca ps S cr ol l C om po se
< 2.2 > SUN Keyboard / Mouse Options
Se S keyboard integrated with touchpad
S keyboard integrated with touchpad / trackball
¦ Incorporates SUN k eys, including Stop, Cut, Paste, Compose, Copy and Help
¦ 104 key notepad keyboard with full numerical pad and SUN function
¦ USB interface
¦ US layout only
How to Use "S" Keyboard
Num LED in O ff mode
Key pad behaves as a SUN Solar
system administration com mand mode
Num LED in Green mode
Key pad behaves as a normal key
pad m ode
Audio / Display Ke ys * Please ask your supplie r for full detai ls
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
1
Pictu re
Picture mode :
Standard / Vivid / Soft / User mode to choose
Brightness :
Adjust background black level of the screen imag e
Contrast :
Adjust the difference between the image background
(black level) an d the foreground (white level)
Hue:
Adjust the screen hue value
Saturation :
Adjust the saturation of the ima ge colo r
Picture size :
Adjust the image size
Color temp :
Standard / Cool / Warm / User to choose
Noise red uce :
Red uce the noise of the image
Sharpness :
Adjust the image from wea k to sha rp
< 2.3 > On-screen Display Operation ( OSD )
M embrane Switch Funct ion
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed co ntrol
Exit t he OSD screen
Go back to the previous on-screen sub-men u o r
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power tou ch button will flash continuously when there is no signal input.
1 All the LED touch buttons will au tom atically turn off after 10 minutes of idle status ( excep t the Power ).
2 Light up all membran e bu tton s, please press any button for 1 - 2 seconds ( excep t the Power ).
2
PC
Auto adjust :
Auto mat ically ad just sizes, centers and fine tunes the
video signal to eliminate waviness and distortion.
Clock :
Adjust the clock value
Phase :
Adjust the phase value
H. Po sition :
Align the screen image left or right
V. Position :
Align the screen image up or down
4
MISC
Language :
Select the language in which the OSD menu is
displaye d - English
Sleep timer :
Set the off time
PIP mode :
Adjust picture in pict ure sett ing
PIP position :
Enter into PIP position
PIP source :
Enter into the Sub source and sound so urce
System reset :
Return the adjustment back to factory setting
Information :
Select for Help
< 2.3 > On-screen Display Operation ( OSD )
3
Audio
Audio mode : Movie / Voice / Norm al / Music mode to choose
Volum e : Adjust the volu me of sou nd
Bass :
Treble : Set the value of treble sound
Balance : Set the balance value of treble a nd bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
Set the value of bass sound
INPUT
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equalized & relocked
Standard Compliance
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
Compatible Video Format
3G-SDI
1080p @60 / 50Hz, 4:2:2
1080p @30 / 25 / 24Hz, 4:4:4
1080i @60 / 50Hz, 4:4:4
720p @60 / 50Hz, 4:4:4
HD-SDI
1080p @30 / 25 / 24Hz, 4:2:2
1080i @60 / 50Hz, 4:2:2
720p @60 / 50Hz, 4:2:2
SD-SDI
480i @60Hz, 4:2:2
ITU-R BT.656
576i @50Hz, 4:2:2
Compatible Audio Format
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
Ac nodes’ SDI input is an ideal s olution for the broadcastgrade video and high resolution CCTV market.
Designed for use with Full HD 1080p and ultra high resolution
1920 x 1200 LCD displays, Acnodes provides a SDI input
module without using additional space or power and it comes
standard with a 2-year warranty.
Powe r
Audio
SDI
in - out
in - in - out
PC Video
S-Video BNC
HDMI
KVM
DVI-D
KDM8270
< 3.2 > Options :
1U Rackmount LCD Keyboard Drawer
- HDMI
- AV
- Audio
For dual slide 1U LCD console drawer, the user can only select one of the above four options.
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
( HD MI 1.1, CEA -861-D )
( S-Vid eo + Compo site, BN C )
( 3.5mm audio jack s for au dio in & o ut, and 2W + 2W spea kers )
Power
Audio
in - in - out
PC Video
S-Video BNC
© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
HDMI
KVM
DV I-D
Model
12V
24V 48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Input current
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
245 0 m A
1220 mA
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
KDM8270
< 3.3 > Options : DC Power
DC power
***
Option excludes 1 x power cord and 1 x AC power adapter
14628 Central Ave,
Chin o, CA 91710
tel: 909.597.7588, fax:909.597.1939
1U Rackmount LCD Keyboard Drawer
DVI-D
KVM
© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.
Loading...