Acnodes KDM 81912 User Manual

KDM81712/81912

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc. All rights reserved. Product description and product specifi cations are subj ect to c han ge with out notic e. For l atest produ ct informati on, please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave, Chin o, CA 91710 tel: 909.597.7588, fax:909.597.1939

User Manual

KDM81712/81912: 1U Rackmount Dual Slide 17/19” 1280x1024 Industrial Monitor Keyboard Drawer

KDM81712/81912

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc. All rights rese rved. Product descri pt ion and produc t specif ication s are subj ect to c han ge with out notic e. For l atest produ ct informati on, please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave, Chin o, CA 91710 tel: 909.597.7588, fax:909.597.1939

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment’s ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.

■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from: □ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

□ Repair or attempted repair by anyone not authorized by us. □ Any damage of the product due to shipment. □ Removal or installation of the product. □ Causes external to the product, such as electric power fluctuation or failure. □ Use of supplies or parts not meeting our specifications. □ Normal wear and tear. □ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

KDM81712/81912

1U Rackmount LCD Keyboard Drawer

14628 Central Ave, Chin o, CA 91710 tel: 909.597.7588, fax:909.597.1939

< Part. 1 > KDM81712/81912

1.1 Package Content

Contents

P.1

1.2 Structure Diagram & Dimension

1.3 Installation

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 Keyboard / Mouse Specifications

2.3 On-screen Display Operation ( OSD )

< Part. 3 > Options

3.1 Audio

3.2 48V, 24V or 12VDC power

< Part. 4 > KVM Integration

4.1 KVM port connection

4.2 Specifications

4.3 KVM Button

4.4 KVM Hotkey

4.5 DC power 12V, 24V, 48V Input

P.1 - 2 P.3 - 5

P.6 - 7 P.8 P.9

P.10 P.11

P.12 P.13

P.14 P.15

P.16

KDM81712/81912

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc. All rights rese rved. Product descri pt ion and produc t specif ication s are subj ect to c han ge with out notic e. For l atest produ ct informati on, please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave, Chin o, CA 91710 tel: 909.597.7588, fax:909.597.1939

Before Installation

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, pleas e follow these steps :

Dis connect the power cord.

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To rem ove tough m arks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive clea nser on a microfiber cloth.

Cauti on : Do not spra y or apply any liquids directl y onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is com pletely dry before plugging it in and powering it up.

1 Carry handle to release the 2-pt lock

Audio speaker ( for HDMI or Audio option )

2 LCD interchangeable module kit

Keyboard interchangeable module kit

< Part 1 >

< 1.1 > Package Content

< 1.2 > Structure Diagram

2 3

KDM81 712/81 912 unit X 1

- 6ft Co mb o KVM cable X 1

- Power cord X 1

- M6 sc rew, cage nut & cup was her X 8

Installation Slides LCD membrane

Membrane switch (KVM optio n)

Touchp ad mouse module 1U dua l slide for LCD console drawer

Model

Product

Dimension

(W x D x

Packing

Dimension

(W x D x

Net

Weight

Gross

Weight

KDM 81712

441.6 x 650 x 44 mm

17.4 x 25.6 x

1.73"

595 x 860 x 140 mm

23.4 x 33.9 x

5.5”

13 kg

29lb

19 kg

42 lb

KDM 81912

441.6 x 650 x 44 mm

17.4 x 25.6 x

1.73"

595 x 860 x 140 mm

23.4 x 33.9 x

5.5”

14 kg

31 lb

20 kg

44 lb

< 1.2 > Dimension

Front View

Sid e View

Top View

UNIT : mm

1mm = 0.03937 inch

+ 14 hidden pages