14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
COPYRIG HT NOTICE
The information in this document is subject to change without prior notice in order to improve reli-
ability, design and function and does not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential
damages arising out of the use or inability to use the product or documentation, even if
advised of the possibility of such damage s.
This document contains proprietary information protected by copyright. All rights are reserved. No
part of this manual may be reproduced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their respective owners.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
WARNING!
This equipment generates uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions manual, it may cause interference to radio
comm unications.
It has been tested and found to comply with the limits for a Class A computing de- vice pursuant to
FCC Rules, which are designed to provide reasonable protect ion against such interference when
operated in a commercial environment. Operation of this equipment in a re sidential area is likely to
cause interference in which case the user at his own expense will be required to take whatever
measures may be required to correct the interference.
Electric Shock Hazard – Do not operate the machine with its back cover removed. There are
dangerous high voltages inside.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
Packing List
Accessories (as ticked) included in this package
(
)AC power cable
are
:
( )Driver & manual CD disc
( )Other._____________(please specify)
Safety Precautions
Follow the messages below to avoid your systems from damage:
Avoid your system from static electricity on all occasions.
Prevent electric shock. Don‘t touch any components of this card when the
card is power-on. Always disconnect power when the system is not in use.
Disconnect power when you change any hardware devices. For instance, when
you connect a jumper or install any cards, a surge of power may damage the
electronic components or the whole system.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
1.3 Brief description of FPC 76XX
T h e F P C 7 6 X X is a p o w e r - o p tim iz e d a n d d e l iv e rs r o b u s t p e rf o r m a n c e - p e r - w a tt f o r e m b e d d e d H M I.
T h e p o w e r e d b y a n A to m D 5 25 1 .8 G H z p ro c e s s o r a n d off e r fu ll s iz e s : 1 5 /1 7 /1 9 - in c h . It c o m e s w ith a
c o m p a c t fla s h s lo t, 2 .5 -i n c h h a r d d is k d r iv e , D D R 3 m em o ry , a u d i o ja c k , 2 E th e r n e t, D C in p u t, a n d 4
U S B p o
S ta n d a r d 7 . T h e fa n le s s to u c h p a n e l c om p u te r is id e a l fo r u s e a s W e b B r o w s e r , T e r m in a l a n d H M I a t
a l l le v e ls o f a u to m a tio n c o n tr o l
rts
. T h e u n i t s u p p o r ts W in d o w s C E 6 .0 , X P P r o , X P E m b e d d e d a n d W ind o w s E m b e d d ed
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
M a i n b o a rd S p e c i fi c a ti o n s
B o a r d S iz e
1 6 5 x 11 5 m m
C P U S u p p o r t
In te l A to m D 5 2 5 /1 .8 G H z (o n b o a r d )
C h ip s e t
In te l IC H 8 M
M e m o ry S u p p o r t
1 x 2 0 4 P in S O - D IM M , u p to 2 G B D D R 3 8 0 0 M H z F S B
S u p e r I/ O
W in b o n d W 8 3 6 2 7 U H G
B IO S
A M IB IO S
S t o ra g e
3 x S AT A C o n n e c to r
1 x C o m p a c t F la s h II S lo t
N e t w o r k
2 x R J - 4 5 1 0 0 0 M b p s L A N In te l 8 2 5 7 4 L
4 x U S B 2 .0 s ta c k p o r t fo r e x te rn a l
2 x U S B 2 .0 P in h e a de r fo r in te r n a l
U S B
S e ria l
1 x R S 2 3 2 p o r t, D B 9 c o n n e c to r fo r e x te r n a l ( C O M 1 ),
p in 9 w /5 V /1 2 V / R in g s e l e c t
1 x R S 2 3 2 /4 2 2 /4 8 5 s e le c t h e a d e r f o r in te rn a l ( C O M 3 ), d e fa u lt
R S 2 3 2
4 x R S 2 3 2 h e a d e r fo r in te r n a l ( C O M 2 ,C O M 4 ,C O M 5 ,C O M 6 )
D ig ita l I/O
8 - b it d ig ita l I/O b y P in h e a d e r
4 - b it d ig ita l In p u t
4 - b it d ig ita l O u tp u t
B a t t e r y
S u p p o r t C R 2 4 7 7 L i ba tte r y b y 2 - p in h e a d e r
A u d io
S u p p o rt A u d io v i a R e a lte k A L C 66 2 H D a u d io d e c o d e r
S u p p o rt L in e - in , L in e - o u t, M IC b y 2 x 5 - p in h e a d e r
K e yb o a rd
/M o u s e
1 x P S 2 k e yb o a rd /m o u s e b y 1 x 6 b o x p in h e a d e r
E x p a n s io n B u s
1 x P C 1 0 4 + c o n n e c to r (P C I m a s te r 4 , ju m p e r f o r + 3 .3 V & 5 V
s e le c t)
2 x m in i- P C I- e x p r e s s s l o t (1 x fu ll s iz e , 1 x h a lf -s i ze )
P o w e r
M a n a g e m e n t
D C 1 2 V i n p u t
1 x 2 - p in p o w e r in p u t c o n n e c to r
F ro n t I/O
b y 2 x 5 - p in h e a d e r
P o w e r o n /o ff s w itc h
R e s e t s w itc h
P o w e r L E D s ta tu s
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
3.4.7 MPS Configuration
3.4.8 PCI Ex press Configuration
FPC 7615
15 inch Atom Fanless Panel PC
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
All rights reserved. Product description and product specifications
are subj ect to ch ange with out notice . For latest produ ct in format ion,
please visit Acnodes’ web site at www.acnodes.com.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
E x a m p l e x 8 6 a s s e m b l y c o d e :
m o v d x , 4 E h m
o v a l, 0 A A h o u t
d x , a l
E x a m p l e C c o d e :
o u t p o r tb (0 x 4 E , 0 x A A ) ;
S e l e c t l o g ic d e v i c e n u m b e r
E x a m p l e x 8 6 a s s e m b l y c o d e :
m o v d x , 4 E h
m o v a l, 0 0 7 h ;L D N s e l e c ti o n r e g is te r o u
t d x , a l
m o v d x , 4 F h
m o v a l, 0 0 8 h ;S e l e c t L D N = 8 , G P IO P o r t6
; o r S e l e c t L D N 9 , G P I O P o r t2
o u t d x , a l
E x a m p l e C c o d e :
o u t p o r tb (0 x 4 E , 0 x 0 7 ); / /L D N s e l e c ti o n r e g i s te r
o u t p o r tb (0 x 4 F , 0 x 0 8 ); / /S e l e c t L D N = 8 , G P I O P o r t6
o r
o u t p o r tb (0 x 4 E , 0 x 0 7 ); / /L D N s e l e c ti o n r e g i s te r
o u t p o r tb (0 x 4 F , 0 x 0 9 ); / /S e l e c t L D N = 9 , G P I O P o r t2
A c t iv a t e t h e lo g ic d e v i c e
E x a m p l e x 8 6 a s s e m b l y c o d e :
m o v d x , 4 E h
m o v a l, 0 3 0 h ;L o g i c d e v ic e a c t i v a ti o n c o n tr o l r e g . o u t
d x , a l
m o v d x , 4 F h
i n a l , d x
o r a l, 0 0 4 h ;S e t b i t2 to e n a b l e G P IO P o r t6 if L D N = 8 o r
a l, 0 0 2 h ;S e t b i t1 to e n a b l e G P IO P o r t2 if L D N = 9 o u t d x
, a l
E x a m p l e C c o d e :
o u t p o r tb (0 x 4 E , 0 x 3 0 ); / /L o g i c d e v i c e a c ti v a ti o n c o n t ro l o u t p
o r tb (0 x 4 F , ( i n p o r t b (0 x 4 F ) |0 x 2 ) ) ;
/ /S e t b it [1 ] t o e n a b l e G P IO P o r t2 i f L D N = 9
O r
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
outpo rtb(0 x4E, 0x30); //Logic device ac tivation contro l
outpo rtb(0 x4F, (inportb(0x4F)|0x4));
//S et bit[2] to enable GP IO Por t6 if LDN= 8
Configure GPIO register
E xample x86 as sembly code:
m ov dx, 4Eh
m ov al, 0E 6h ;GP IO inversion reg.
out dx , al
m ov dx, 4Fh
m ov al, 000h ;0 – norm al, 1 - inverted
out dx , al
m ov dx, 4Eh
m ov al, 0E 4h ;GP IO I/O selec tion reg.
out dx , al
m ov dx, 4Fh
m ov al, 0FFh ;0 – Output, 1 – Input
;or m ov al, 0F0h to s et ou tput
out dx , al
E xample C c ode:
outpo rtb(0 x4E, 0xE 6); //GP IO I/O selec tion reg.
outpo rtb(0 x4F, 0x0); //0 – nor mal, 1 – inv erted
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
G P = in p o rtb (0 x 4F ); / /B it [3 : :0 ] = G P I[ 3 :: 0 ]
W ri te G P IO v a lu e
E xa m p le x8 6 a s se m b ly co d e :
; S e t G P O 6 2
m o v d x, 4 E h
m o v a l, 0 E 5 h ;G P IO d a t a re g .
o u t d x , al
m o v d x, 4 Fh
in a l, d x
o r a l, 0 0 0 0 0 1 0 0b ;B it2 = G P O 6 2
o u t d x , al
; C le a r G P O 6 2
m o v d x, 4 E h
m o v a l, 0 E 5 h ;G P IO d a t a re g .
o u t d x , al
m o v d x, 4 Fh
in a l, d x
a n d a l, n o t 0 0 0 0 0 1 0 0 b
o u t d x , al
E xa m p le C c od e :
/ /S e t G P O 6 2
o u t p o rtb (0 x4 E , 0 xE 5 ); //G P IO d a t a re g .
O u t p o rtb (0 x 4F , (in p o rtb ( 0x 4 F )|0 x4 )); / /S e t B it[ 2 ]
/ /C le a r G P O 6 2
o u t p o rtb (0 x4 E , 0 xE 5 ); //G P IO d a t a re g .
O u t p o rtb (0 x 4F , (in p o rtb ( 0x 4 F )& 0 xF B )) ; / /C le a r B it[ 2 ]
T h e f o l l o w i n g s a r e C l a n g u a g e s o u rc e c o d e :
# in
clu
d e "st d io .h "
# in
clu
d e
"co
/ /S u p e r I /O in d e x a
# d e f in e IN D E X P 0 x4 E
# d e f in e D A T A P 0 x 4F
/ /E n te r su p e r I/ O p ro g ra m m in g m od e
# d e f in e E N T E R P R G { \
o u t p o rtb ( IN D E X P , 0 x8 7 ); \
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
o u t p o rtb ( IN D E X P , 0 x8 7 ); }
/ /S u p e r I /O in d e x w rite
# d e f in e W R IT E R E G(r e g ,va l) { \
o u t p o rtb ( IN D E X P , re g ); \
o u t p o rtb (D A TA P , va l); }
/ /E xit su p e r I/ O p ro g ra m m in g m o d e
# d e f in e E X IT P R G { \
o u t p o rtb ( IN D E X P , 0 xA A ); }
/ /S e le ct lo gic d e vice n u m b e r
# d e f in e S E L E TD E V (ld n ) { \
o u t p o rtb ( IN D E X P , 7 ); \
o u t p o rtb (D A TA P , ld n ); }
/ /I n itia lize t h e G P I O p o rt2
in t I n itG P 2 () {
/ /S ta rt t h e su p e r I /O ch ip pr o g ra m m in g
E N TE R P R G
/ /S e le ct th e lo g ica l d e vice 9 , G P 2
S E L E T D E V (9 )
/ /A
ctiv a
t e G P 1
W R ITE R E G (0 x3 0 , (in p o rtb (0 x3 0 )|0 x2 ))
W R ITE R E G (0 xE 6 , 0 x 0
W R ITE R E G (0 xE 4 , 0 x FF )
)
/ /E xit th e su p e r I/ O ch ip p ro g ra m m in g
E X IT P R G
re tu rn 0 ;
}
/ /I n itia lize t h e G P I O p o rt6
in t I n itG P 6 () {
/ /S ta rt t h e su p e r I /O ch ip pr o g ra m m in g
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
CHAPTER 4 Installation of Drivers
This chapter des cribes the installation procedures for software and drivers under the windows XP. The
s of tware and drivers are included with the motherboa rd. The contents include Intel chipset dri ver,
VGA driver, LAN driver, Audio dri ver, Touc h Panel driver
Insta llation instructions are given below
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
C lic k F in i s h , w h e n th e in s ta lla tio n p r o c e s s is c o m p le te , th e S e tu p C o m p le te s c r e e n a p p e a r s . S e e a s
p i c tu r e .
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
4 .2 I n t e l G M A 3 1 5 0 V G A C h ip s e t D r iv e r
T o in s t a ll t h e V G A d r iv e r s , f o llo w t h e s t e p s b e lo w t o p r o c e e d w i t h t h e in s t a l la t io n .
1 . C l ic k I n t e l G M A 3 1 5 0 V G A C h ip s e t D riv e r .
F o llo w t h e s t e p - b y - s t e p in s t a lla t io n p r o c e s s to i n s t a ll t h e G ra p h i c s M e d ia A c c e le r a t o r d r iv e r .
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
CHAPTER 5 Touch Screen Installation
T h i s c h a p te r d e s c r ib e s h o w to in s ta ll d r iv e r s a n d o th e r s o ftw a r e th a t w il l a llo w y o u r P e n M o u n t 6 0 0 0
C o n tr o lle r B o a r d to w o r k w ith d
iffe
r e n t o p e r a tin g s y s te m s .
N O T E : P e n M o u n t U S B d r iv e r s s u p p o rt u p to 1 5 U S B c o n tr o lle r s .
5 .1 I n t ro d u c ti o n to T o u c h S c re e n C o n t ro lle r B o a rd
P e n M o u n t 6 3 0 0 U S B c o n tro l b o a r d is a to u c h s c r e e n c o n tro l b o a rd d e s ig n e d f o r U S B in te r fa c e a n d
s p e c ific f o r 4 , 5 , 8 -w i re to u c h s c r e e n s . It is de s ign e d w ith U S B in te r fa c e fe a tu r e s w ith m u
s u p p o rti n g fu n c tio n . P e n M o u n t 6 3 0 0 c o n tr o l b o a r d u s in g P e n M o u n t 6 0 0 0 c o n tr o lle r t h a t h a s b e e n
d e s ig n e d fo r th o s e w h o m a y li k e a n d a ll- in - o n e s o lu tio n w ith 1 0 - b it A /D c o n v e rte r b u i lt- in to m a k e th e
to ta l p rin te d c ir c u it b o a r d d e n s e r , c ir c u i t d ia g ra m a ls o d e s ig n e d fo r 1 2 - b it A D C f o r o p tio n a l. T h e r e a re
tw o c o n n e c to r s o n th is b o a rd , on e c o n n e c to r is fo r 4 , 5 , 8 - w ir e to u c h s c r e e n c a b le ( o p tio n a l) , a n d
a n o th e r is f o r 4 -p i n U S B A ty p e c a b le ( o p tio n a l) .
ltip
le d e vi c e s
F ig u re 5 .1 : B i rd ’ s E ye V ie w o f C o n t ro l B o a rd
5 .2 W i n d o w s 2 0 0 0 / X P /2 0 0 3 / V i s t a U n i v e rs a l D r iv e r I n s ta ll a tio n fo r
P e n M o u n t 6 0 0 0 S e r ie s
B e fo r e in s ta llin g th e W in d o w s 2 0 0 0 /X P d r iv e r s of tw a r e , y o u m u s t h a v e th e W in d o w s 2 0 0 0 /X P s y s te m
in s ta lle d a n d r u n n in g o n y o u r c o m p u te r . Y o u m u s t a ls o h a v e o n e o f th e fo llo w in g P e n M o u n t 6 0 0 0
s e rie s c o n tr o lle r o r c o n tr o l b o a r d s in s ta l le d : P M 6 5 0 0 , P M 6 3 0 0 .
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
5.2.1 Installing Software
If you have an olde r version of the PenMount W indows 2000/XP driver installed in your system, please
remove it f irst. Follow the s teps below to in stall the PenMount DMC 600 0 Window s 2000/XP driver.
1. Please make s ure your PenMount 6000 device had plugged in adva nce. If your device uses RS232
in terf ace, please plugged in befo re the machin e is turned on. W hen the sys tem first detects the
c ontroller board, a s creen appears that shows “U nknown De vice”. D o not use this hardware wizard.
Press C ancel.
2. In sert the product C D install setup.exe. the sc reen below would appear. Clic k touch panel driver
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
5 .2.2 S o f tw a re F u n c t io n s
U p o n r e b o o tin g , th e c o m p u te r a u to m a tic a ll y f in d s th e n e w 6 0 0 0 c o n tr o ll e r b o a rd . T h e to u c h s c re e n is
c o n n e c te d b u t n o t c a l ib ra te d . F o l lo w th e p r o c e d u r e s b e lo w to c a r r y o u t c a lib r a tio n .
1 . A fte r in s ta l la tio n , c li c k th e P e n M o u n t M o n i to r ic o n “ P M ” in th e m e n u b a r .
2 . W h e n th e P e n M o u n t C o n tr o l P a n e l a p p e a r s , s e le c t a d e v ic e to “ C a li b ra te .”
P e n M o u n t C o n tr o l P a n e l
T h e fu n c tio n s o f th e P e n M o u n t C o n tr o l P a n e l a re D e v ic e , M u lt
w h ic h a r e e x p la in e d in th e fo llo w i n g s e c tio n s .
ip
le M o n it o rs , T o o ls a n d A b o u t ,
D e v i c e
I n th is w in d o w , y o u c a n fi nd ou t th a t h o w m a n y d e v ic e s a r e d e te c te d o n y o u r s y s te m .
C a l ib rat e
T h is fu n c tio n o ffe r s tw o w a ys to c a li b r a te y o u r to u c h s c re en . ‘ S ta n d a rd C a lib r a tio n ’ a d ju s ts m o s t to u c h
s c r e e n s . ‘A d v a n c e d C a li b r a tio n ’ a d ju s ts a g in g to u c h s c re e n s .
S ta n d a r d C a lib r a tio n C lic k t h is b u tt o n a n d a r ro w s a p p e a r
p o in t in g to r e d s q u a r e s . U s e yo u r f
s t ylu s t o to u c h t h e r e d s q u a r e s in
s e q u e n c e .
Af
t e r th e f if t h r e d p o in t
c a lib ra t io n is c o m p le t e . T o s k ip , p r e s s
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
Advanced Calibration
Ad vance d C alibration uses 4, 9 , 16 or 25 points to effective ly
c alibrate touc h panel linearity of aged touch screens. Click
thi s button and touch the red squares in sequence w ith a styl
us. To skip, press
ES C’.
Command Ca libration
Com mand call calibration function. U se comm and m ode call
calibration function, this can uses S tandard, 4, 9, 16 or 25
points to ca li brate E.g. P lease run ms-dos prompt or comm and
prompt c :\Program
Fi les\P enMount Universa Driver\Dmcc trl .exe
-c alibration 0 ( S tandard C alibration) Dmcc trl.e xe - c alibration
($) 0= S tandard Calib ratio n 4=A dvanced Cali brati on 4
9=A dvanced Ca libration 9 16=A dvanced
Calib ratio n 16 25=A dvanced Cal ibration 25
1. P lease sel ect a device th en click “C onf igure”. Y ou can als o dou ble click th e device too.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
N OT E: T he older the touch s creen, the m o re A dvanced M ode calib rati on points you need for an
ac curate calibration. U se a stylus du rin g A dvanc ed Calib rati on f or greater accuracy. P lease fol low the
s tep as below:
3.C om e ba ck to “P enM ount C ontrol P anel” and select “ T o ols” the n Cl ick “Ad van ced C alib ratio n ”.
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
M u lt ip le M o n it o r s
M u lt ip le M o n ito r s s u p p o r ts f ro m tw o to s ix to u c h s c r e e n d is p la y s f o r o n e s y s te m . T h e P e n M o u n t
d r iv e r s f o r W in d o w s 2 0 0 0
s c re e n d is p la y s fo r o n e s ys te m . E a c h m o n ito r re q u ir e s i ts o w n P e n M o u n t to u c h s c r e e n c o n tr o l b o a r d
i th e r in s ta lle d in s i de th e d is p la y o r in a c e n tr a l u n it. T h e P e n M o u nt c o n tr o l b o a rd s m u s t b e c o n n e c te d to
th e c o m p u te r C O M p o r ts v ia th e R S - 2 3 2 in te r fa c e . D r iv e r in s ta lla tio n p r o c e d u r e s a r e th e s a m e a s
fo r a s in g le m o n ito r . M u
W in d o w s E
M a
tro
xte
x D u a lH e a d M u
n V id ia n V ie w
N O T E : T h e M u ltip le M o n ito r s fu n c tio n i s f o r u s e w ith m u
y
o u h a v e o n ly o n e to u c h s c r e e n d is p la y . P le a s e n o te o n c e y o u tu rn o n th is fu n c tio n t he R o ta tin g
fu n c tio n is d i s a b le d .
E n a b le th e m u
ltip
le d is p la y f u n c ti on a s f o llow s :
1 . C h e c k th e “M u lt iple M o n it or S up p o rt ” b o x ; th e n c
c o n
tro
l le r s to d is p l a ys .
/X
P s u p p o r t M u
ltip
le M o n i to rs s u p p o rts th e fo llo w i n g m o d e s :
ltip
le M o n ito rs . T h i s fu n c tio n s u p p o r ts fr om tw o to s ix to u c h
n d M o n ito r Fu n c tio n
lti-
S c re e n F u n c tio n
Fu
n c tio n
lic
ltip
l e d is p la y s o n l y . D o n o t u s e th is f u n c tio n
k “M a p T ou c h S c re e
ns
” to a s s ig n to u c h
, e
if
2 . W h e n th e m a p p in g s c r e e n m e s s a g e a p p ea r s , c
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
3 . T o u c h e a c h s c r e e n a s it d is p la y s “ P l e a s e t o u c h t h i s m o n i t o r. P re s s ‘ S ’ t o s k i p ” F o llo w in g t h i s
s e q u e n c e a n d t o u c h in g e a c h s c r e e n is c a l le d m a p p i n g t h e to u c h s c r e e n s .
4 . A f t e r t h e s e t t in g p r o c e d u r e is f in is h e d , m a y b e y o u n e e d t o c a lib r a t e f o r e a c h p a n e l a n d c o n t r o lle r
N O T E S :
1 . I f y o u u s e d a s in g le V G A o u t p u t f o r m u lt ip le m o n it o r s , p le a s e d o n o t u s e t h e M u l t i p l e M o n i t o rs
f u n c t io n . J u s t f o ll o w t h e r e g u la r p ro c e d u r e f o r c a l ib r a t io n o n e a c h o f y o u r d e s k t o p m o n it o r s .
2 . T h e R o t a t in g f u n c t io n is d is a b le d if y o u u s e t h e M u lt ip le M o n i t o rs f u n c t io n .
3 . I f y o u c h a n g e t h e re s o l u t io n o f d is p la y o r s c r e e n a d d r e s s , y o u h a v e t o re d o M a p T o u c h S c re e n s s o t
h e s y s t e m u n d e r s t a n d s w h e r e t h e d i s p la y s a r e .
4 . I f y o u m o re m o n it o r m a p p i n g o n e t o u c h s c r e e n , P l e a s e p re s s ‘ S ’ to s k i p m a p p i n g s t e p .
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
P e n M o u n t M o n it o r M e n u Ic o n
T h e P e n M o u n t m o n ito r ic o n (P M ) a p p e a rs in th e m e n u b a r of W in d o w s 2 0 0 0 /X P s y s te m w h e n y o u
tu r n o n P e n M o u n t M o n ito r in P e n M o u n t U tilitie s .
P e n M o u n t M o n ito r h a s th e fo ll o w in g fu n c tio n
P e n M o u n t R o t a tin g F u n c t io n s
T h e P e n M o u n t d r iv e r fo r W in d o w s 2 0 0 0 /X P s u p p o r ts s e v e ra l d is p la y r o ta tin g s of tw a r e p a c k a ge s .
14628 Central Ave,
Chin o, CA91710
tel: 909.597.7588, fax:909.597.1939
W indows Me/2000/XP support displ ay rota ting software pack ages such as:
• Portrait’s Pivot Sc reen Rotation Software
• ATI Disp lay Driver Rota te Function
• nVidia D isplay Drive r Rotate Function
• SMI Disp lay Driver R otate Fun ction
• Intel 845 G/GE D ispl ay D river Rotate Function
C onfiguring the R otate Function
1. In stall the rotation software pack age.
2. C hoose the rotate function (0°, 90°, 180 °, 270°) in the 3rd party software. The calibration screen
appears automatically. To uch this point and rotat ion is mapped.
N OTE: The Rotate function is disabled if you use Monitor Mapping
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.