How it Works
Acnodes
Loading...
FPC 6104
User Manual
112 pgs2.04 Mb0

Acnodes FPC 6104 User Manual

FPC 6104
User Manual
FPC6104: 10.4” Industrial Panel PC with Atom N270 fanless embedded system
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to improve reli­ability , design and function and does not represent a commitment on the part of the manufacturer .
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer .
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective owners.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
T able of Contents
CHAPTER 1 INTRODUCTION
1.1 OVERVIEW ...................................................................................................................... 2
1.1.1 FEA TURES ........................................................................................................ 2
1.1.2 MODEL V ARIA TIONS ........................................................................................ 2
1.1.3 APPLICATIONS ................................................................................................. 2
1.2 EXTERNAL OVERVIEW .................................................................................................. 3
1.2.1 FRONT P ANEL .................................................................................................. 3
1.2.2 REAR P ANEL .................................................................................................... 3
1.2.3 BOTTOM P ANEL ............................................................................................... 4
1.2.4 SIDE P ANEL ...................................................................................................... 4
1.2.5 FRAME ............................................................................................................... 5
1.3 SPECIFICA TIONS ........................................................................................................... 6
CHAPTER 2 DETAILED SPECIFICATIONS
2.1 INTRODUCTION.............................................................................................................. 15
2.1.1 FPC6104 DIMENSIONS
2.2 INTEL A TOM PROCESSOR ........................................................................................... 15
2.3 MOTHERBOARD COMPONENTS ................................................................................ 15
2.3.1 MEMORY SUPPORT .........................................................................................15
2.3.1.1 Installed Memory ..................................................................................15
2.3.1.2 Additional Memory ...............................................................................16
2.3.2 STORAGE CAP ACITY ......................................................................................16
2.4 EXTERNAL PERIPHERAL INTERF ACE CONNECTORS ........................................... 17
2.4.1 SERIAL PORT CONNECTORS ....................................................................... 17
2.4.2 LAN CONNECTIVITY ........................................................................................ 18
2.4.3 EXTERNAL USB CONNECTORS ....................................................................18
2.4.4 KEYBOARD AND MOUSE CONNECTIVITY ....................................................19
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.5 FPC6104 FRONT SIDE ................................................................................................ 20
2.5.1 MONITOR ......................................................................................................... 20
2.5.2 TOUCH-SCREEN MODULE............................................................................ 20
2.6 GRAPHICS ..................................................................................................................... 20
2.6.1 INTEL 945 GSE INTEGRA TED GRAPHICS ENGINE..................................... 20
2.6.2 DUAL-DISPLA Y .................................................................................................21
2.7 AUDIO ..............................................................................................................................21
2.8 SYSTEM POWER ...........................................................................................................22
2.8.1 FPC6104 POWER ............................................................................................22
CHAPTER 3 UNPACKING
3.1 UNP ACKING ................................................................................................................... 25
3.1.1 P ACKING LIST .................................................................................................26
CHAPTER 4 INSTALLATION
4.1 ANTI-STA TIC PRECAUTIONS ...................................................................................... 29
4.2 INST ALLA TION PRECAUTIONS .................................................................................. 29
4.3 PREINST ALLED COMPONENTS ............................................................................... 29
4.4 INST ALLA TION AND CONFIGURATION STEPS ........................................................ 30
4.5 REMOVE THE BACK COVER ............... ..................................................................... 30
4.5.1 FPC6104 BACK COVER REMOV AL ............................................................ 31
4.6 JUMPER SETTINGS ..................................................................................................... 32
4.7 COMP ACTFLASH CARD INST ALLA TION ...................................................................33
4.8 HDD INST ALLA TION ..................................................................................................... 33
4.8.1 FPC6104HDD Installation.............................................................................. 33
4.9 JUMPER SETTINGS ..................................................................................................... 35
4.9.1 ACCESS THE JUMPERS ...............................................................................36
4.9.2 PRECONFIGURED JUMPERS ......................................................................38
4.9.3 AT POWER SELECT JUMPER SETTINGS ..................................................40
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
4.9.4 CF CARD SETUP ............................................................................................41
4.9.5 CLEAR CMOS JUMPER .................................................................................42
4.9.6 CMO 2 FUNCTION SELECT JUMPER ..........................................................43
4.9.6.1 COM2 RS-422 AND RS-485 PINOUTS .......................................... 44
4.10 MOUNTING THE SYSTEM .......................................................................................... 47
4.10.1 WALL MOUNTING .......................................................................................... 47
4.10.2 P ANEL MOUNTING ...................................................................................... 50
4.10.2.1 FPC6104-N270 .............................................................................. 50
4.10.3 ARM MOUNTING ........................................................................................... 52
4.10.4 CABINET AND RACK INST ALLA TION ........................................................ 54
4.10.4.1 FPC6104-N270 ...............................................................................55
4.1 1 REAR P ANEL CONNECT ORS ...................................................................................57
4.1 1.1 KEYBOARD AND MOUSE CONNECTION .................................................58
4.1 1.2 LAN CONNECTION .......................................................................................58
4.1 1.3 SERIAL DEVICE CONNECTION ..................................................................59
4.1 1.4 USB DEVICE CONNECTION .......................................................................60
4.1 1.5 VGA MONIT OR CONNECTION ....................................................................61
4.12 SYSTEM MAINTENANCE ..........................................................................................62
CHAPTER 5 BIOS SCREENS
5.1 INTRODUCTION ........................................................................................................... 64
5.1.1 ST ARTING SETUP ..........................................................................................64
5.1.2 USING SETUP .................................................................................................64
5.1.3 GETTING HELP ...............................................................................................65
5.1.4 UNABLE TO REBOOT AFTER CONFIGURA TION CHANGES ...................65
5.1.5 BIOS MENU BAR ............................................................................................65
5.2 MAIN .............................................................................................................................. 66
5.3 ADV ANCED ...................................................................................................................67
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
5.3.1 CPU CONFIGURA TION ................................................................................... 68
5.3.2 IDE CONFIGURA TION ..................................................................................... 69
5.3.2.1 IDE Master, IDE Slave .................................................................................. 71
5.3.3 Super IO Configuration .................................................................................... 76
5.3.4 Hardware Health Configuration ....................................................................... 80
5.3.5 Power Configuration......................................................................................... 84
5.3.5.1 ACPI CONFIGURATION .....................................................................85
5.3.5.2 APM CONFIGURA TION .....................................................................86
5.3.6 REMOTE CONFIGURA TION ........................................................................... 88
5.3.7 USB CONFIGURA TION ................................................................................... 92
5.4 PCI/PnP ...........................................................................................................................94
5.5 BOOT .............................................................................................................................. 97
5.5.1 BOOT SETTINGS CONFIGURA TION ............................................................ 100
5.5.2 BOOT DEVICE PRIORITY .............................................................................. 100
5.6 SECURITY .......................................................................................................................103
5.7 CHIPSET .........................................................................................................................106
5.8 EXIT .................................................................................................................................107
CHAPTER 6 DRIVER INSTALLATION
6.1 A VAILABLE SOFTWARE DRIVERS .............................................................................1 10
6.2 DRIVER CD AUT O-RUN ................................................................................................1 10
6.3 CHIPSET DRIVER INST ALLA TION ...............................................................................1 1 1
6.4 INTEL GRAPHICS MEDIA ACCELERA TOR DRIVER .................................................1 13
6.5 BROADCOM LAN DRIVER (FOR GBE LAN) INST ALLA TION ...................................1 17
6.6 REAL TEK AC`97 AUDIO DRIVER (ALC665) INST ALLA TION .................................... 121
6.6.1 BIOS Setup ...................................................................................................... 121
6.6.2 Driver Installation ............................................................................................. 121
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
A. SAFETY PRECAUTIONS
A.1 SAFETY PRECAUTIONS ............................................................................................. 127
A.1.1 General Safety Precautions ........................................................................... 127
A.1.2 Anti-static Precautions ................................................................................... 128
A.1.3 Product Disposal ............................................................................................ 129
A.2 MAINTENANCE AND CLEANING PRECAUTIONS ................................................... 129
A.2.1 Maintenance and Cleaning........................................................................................ 129
A.2.2 Cleaning Tools ................................................................................................ 130
B. BIOS OPTIONS C. WATCHDOG TIMER D. HAZARDOUS MATERIALS DISCLOSURE
D.1 HAZARDOUS MA TERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 139
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
CHAPTER 1 INTRODUCTION
1. 1 OVERVIEW
The FPC6104 is an industrial flat panel PC. The FPC6104 can be used for machine control, produc­tion lines, kiosks and information stations. The FPC6104 is preinstalled with an Intel® Atom™ CPU for applications where more computing power is needed.
The FPC6104 supports a second monitor for presenting information to customers or extending the display area. The second monitor can show different information to the main screen, or duplicate the main screen content.
The FPC6104 can be installed in a rack, on a VESA clamp or in a custom enclosure with a hole of the correct size.
The FPC6104 supports one 2.5" hard drive and a CompactFlash® disk for data and application storage. CompactFlash® is most often used for thin-client applications, where only basic functions are performed. A hard drive offers more storage space and is the better choice for a general use com­puter.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
1.1.1 FEATURES
Some of the standard features of the FPC6104 flat panel PC include:
Preinstalled 1.6 GHz Intel® Atom™ N270 CPU Preinstalled 1.0 GB DDR2 SO-DIMM memory module Aluminum die-casting IP 65, high brightness industrial panel SA T A interface support Dual GbE support Simplified installation process Low power consumption and thermal distribution RoHS compliance
1.1.2 MODEL VARIATIONS
10.4” FPC6104 CPU: 1.6GHz INTEL A T OM N270 MEMORY : 1.0GB POWER: 60W POWER SUPPL Y 12V DC INPUT
1.1.3 APPLICATION
The flat panel PC is designed for rigorous industrial environments where it may be exposed to both heat and moisture. Its durability and strength also makes it an ideal choice for public access comput­ers. Some possible applications include:
Automated manufacturing processes Public information gathering point
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
1.2 EXTERNAL OVERVIEW
The flat panel PC is a rectangular cubic structure that comprises of a screen, rear panel, top panel, bottom panel and two side panels (left and right). An aluminum frame surrounds the front screen. The rear panel provides screw holes for a wall-mounting bracket, and an arm mounting interface. The bottom panel provides access to external interface connectors that include LAN, USB 2.0, audio, VGA, serial port connectors and CompactFlash® card slot.
1.2.1FRONT PANEL
The front side of the FPC6104 is a flat panel TFT LCD screen surrounded by an aluminum frame.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
1.2.2 REAR PANEL
The rear panel provides access to a fan ventilation vent and four retention screw holes that support a wall-mounting bracket. Figure 1-3 shows the retention screw holes of the FPC6104.
1.2.3 BOTTOM PANEL
The following is a list of the bottom panel peripheral device connectors on the
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
1.2.4 SIDE PANEL
The both sides panel of the flat panel PC contain some vents for ventilation.
1.2.5 FRAME
An aluminum frame surrounds the TFT LCD screen. The aluminum frames of the FPC6104 have small screw holes that are used when the flat panel PC is mounted into a rack or cabinet. These screws are circled in Figure 1-9.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
1.3 SPECIFICATIONS
FPC6104- INTEL ATOM N270 PROCESSOR
FPC 6104
FRONT PANEL: Aluminum front panel CHASSIS: Heavy-duty steel LCD PANEL: 10.4” TFT LCD RESOLUTION: 800 x 600 (SVGA) BRIGHTNESS: 400 CD/M^2 BACKLIGHT MTBF: 50,000 hrs CONTRAST RATIO: 700:1 VIEWING ANGLE: 160/160 (H-V) TOUCH SCREEN: 5-wire resistive type with RS-232 interface CPU: 1.6GHz Intel Atom N270 processor with a 533 MHz FSB CHIPSET: Intel 945 GSE and Intel ICH7M MEMORY: Preinstalled 1 GB DDR2 SDRAM SO-DIMM memory module (system max. 2GB) DISPLAY: Support dual display EXPANSION SLOT: One PCIe mini card slot
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
DRIVE BAY: 1 x 2.5” HDD bay POWER: 60W power adapter MOUNTING: Stand, rack, wall, panel or arm COLOR: Silver OPERATING TEMPERATURE: -10~+50C with CF card, 0~+50C with HDD STORAGE TEMPERATURE: -20~+60C RELATIVE HUMIDITY: 5~95%, non-condensing VIBRATION: 5 - 17Hz, 0.1" double amplitude displacement. 17 - 640Hz, 1.5G acceleration, peak to peak. SHOCK:10G Acceleration, peak to peak (11ms) DIMENSION(MM): 311.5 x 242 x 77.8 NET/GROSS WEIGHT: 3.4 / 5.8 kg
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
CHAPTER 2 DET AILED SPECIFICATIONS
2.1 DIMENSIONS
2.1.1 FPC6104 DIMENSIONS
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.2 INTEL ATOM PROCESSOR
A 45nm N270 Intel® Atom™ processor is installed in the system. The processor has a CPU speed of 1.6 GHz and a 533 MHz front side bus (FSB). The processor also comes with a 512 KB L2 cache and a 1.6 GHz L2 cache speed. Some of the features of the Intel® Atom™ processor N270 are listed below:
-On-die, primary 32-kB instructions cache and 24-kB write-back data cache
-533-MHz source-synchronous front side bus (FSB)
-2-Threads support
-On-die 512-kB, 8-way L2 cache
-Support for IA 32-bit architecture
-Intel® Streaming SIMD Extensions-2 and -3 (Intel® SSE2 and Intel® SSE3) support and Supplemental Streaming SIMD Extension 3 (SSSE3) support
-Micro-FCBGA8 packaging technologies
-Thermal management support via Intel® Thermal Monitor 1 and Intel Thermal Monitor 2
-FSB Lane Reversal for flexible routing
-Supports C0/C1(e)/C2(e)/C4(e)
-L2 Dynamic Cache Sizing
-Advanced power management features including Enhanced Intel SpeedS tep® Technology
-Execute Disable Bit support for enhanced security
2.3 MOTHERBOARD COMPONENTS
The following sections describe some of the features on the motherboard.
2.3.1 MEMORY SUPPORT
2.3.1.1 INSTALLED MEMORY
One 200-pin 1.0 GB 533 MHz DDR2 SDRAM SO-DIMM is installed in the FPC6104 and controlled by the Intel® 945GSE GMCH installed on the internal motherboard.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
2.3.1.2 ADDITIONAL MEMORY
The Intel® 945GSE is capable of supporting one 200-pin 2.0 GB (max.) 533 MHz or 400MHz DDR2 SDRAM SO-DIMM. If additional memory is required, please contact an IEIsales representative and discuss the necessary system requirement.
2.3.2 STORAGE CAPACITY
The FPC6104 series supports an easily installed CompactFlash® Type II (CF Type II) memory disk. The FPC6104 also supports an internal 2.5" SATA drive. The FPC6104 model can also support a slim type optical drive.
The system can also support a CompactFlash® Type II (CF Type II) memory disk(Figure 2-6).
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.4 EXTERNAL PERIPHERAL INTERFACE CONNECTORS
The following section describes the external peripheral interface connectors on the bottom panel of the subsystem.
2.4.1 SERIAL PORT CONNECTORS
The FPC6104 has three serial ports. T wo of these ports (COM1 and COM3) are RS-232 only port. The remaining serial port (COM2) can be configured as a RS-232, RS-422 or an RS-485 serial port. The FPC6104 has one extra RS-232 serial port on the bottom panel.
2.4.2 LAN CONNECTIVITY
The FPC6104 has two RJ-45 LAN connectors on the bottom panel.
The PCIe lane from the Intel® ICH7 chipset of the FPC6104is interfaced to the Realtek RTL81 1 1CP PCIe gigabit Ethernet (GbE) controllers. The RTL81 1 1CP controllers are then connected directly to the RJ-45 connectors on the bottom panel and provides external GbE connectivity . Some of the RTL81 1 1CP control­ler features are listed below:
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
Integrated 10/100/1000 transceiver Supports PCI Express™ 1.1 Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Supports IEEE 802.1P Layer 2 Priority Encoding Supports IEEE 802.1Q VLAN tagging Serial EEPROM Transmit/Receive on-chip buffer support 64-pin QFN package (Green package)
2.4.3 EXTERNAL USB CONNECTORS
There are two USB 2.0 connectors on the bottom panel of the FPC6120 . Both USB 2.0 con­nectors are interfaced directly to the USB controllers on the ICH7-M southbridge. These USB connectors are fully compliant with USB specification Revision 2.0 and USB specification Revision 1.1 and can be interfaced to both USB 1.1 and USB 2.0 compliant devices.
2.4.4 KEYBOARD AND MOUSE CONNECTIVITY
The PS/2 keyboard/mouse connector on the bottom panel interface to a super I/O chipset on the motherboard that connects through the LPC bus to the ICH7-M southbridge chipset.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.5 FPC6104 FRONT SIDE
2.5.1 MONITOR
A LCD screen is installed on the front of the FPC6104 series. The monitor maximum resolution is varied in different FPC6104 models. The screen is shown in Figure 2-11 below.
2.5.2 TOUCH-SCREEN MODULE
A controller for the 4-wire/5-wire resistive touch screen is installed on the motherboard. The sensitive touch screen is accurate, reliable and durable.
2.6 GRAPHICS
2.6.1 INTEL 945G SE INTEGRATED GRAPHICS ENGINE
The Intel® 945GSE has the Intel® Gen 3.5 graphics engine integrated into the chipset and interfaced to the VGA connector on the bottom panel of the FPC6084. The Intel® Gen 3.5 has 250 MHz core render clock and 200 MHz core display clock at 1.05 V core voltage.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
2.6.2 DUAL-DISPLAY
The system supports dual display capabilities. The second display device can be connected to the FPC6104 through the VGA connector described above.
2.7 AUDIO
The integrated AC'97 Audio compliant audio controller on the Intel® ICH7 Southbridge is connected to a 5.1 channel audio kit with RealTek ALC655 audio codec. The audio kit is then connected to three external audio jacks, which are then connected to compliant audio devices. The RealTek ALC655 is a 16-bit AC-'97 Rev. 2.3 compatible six-channel audio codec. The audio connectors are shown in Figure 2-13.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
2.8 SYSTEM POWER
2.8.1 FPC6104 POWER
The standard system is shipped with a 90 V to 264 V AC power adapter that has a maximum power output of 60 W. The power adapter has a 12 V DC output connector. The
FPC6104 series has one 12 V power input connector on the bottom panel. The
power connector is shown in Figure 2-14 below.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
CHAPTER 3 UNPACKING
3.1 UNPACKING
T o unpack the flat panel PC, follow the step s below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat panel PC has been properly installed. This ensures the screen is protected during the installation process.
Step 1: Use box cutters, a knife or a sharp p air of scissors that seals the top side of the external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp p air of scissors that seals the top side of the internal (first) box. Step 4: Lift the monitor out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover of f the flat panel PC.
Step 7: Make sure all the component s listed in the packing list are present.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
3.1.1 PACKING LIST
The FPC6104 flat panel PC is shipped with the following components:
1 x FPC6104 PANEL PC
1 x power adapter
1 x power cord
1 x KB/MS PS/2 Y -cable
1 x Mini jumper packe (2.0mm)
1 x Screw kit
1 x Panel mounting kit Optional
1 x St and
1 x Rack mount Kit
1 x Arm
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
CHAPTER 4 INST ALLATION
4.1 ANTI-STATIC PRECAUTIONS
WARNING: Failure to take ESD precautions during the maintenance of the FPC6104 may
resultin permanent damage to the FPC6104 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic compo-
nents, including the FPC6104. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the FPC6104 is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
-Wear an anti-static wristband: - Wearing a simple anti-static wristband can help to prevent ESD from damaging the board.
-Self-grounding: - Before handling the board touch any grounded conducting ma terial. During the time the board is handled, frequently touch any conducting mate rials that are connected to the ground.
-Use an anti-static pad: - When configuring the FPC6104, place it on an antic-static pad. This reduces the possibility of ESD damaging the FPC6104.
-Only handle the edges of the PCB: - When handling the PCB, hold the PCB by the edges.
4.2 INSTALLATION PRECAUTIONS
When installing the flat panel PC, please follow the precautions listed below:
-Power turned off: When installing the flat panel PC, make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system.
-Certified Engineers: Only certified engineers should install and modify onboard functionalities.
-Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
4.3 PREINSTALLED COMPONENTS
The following components are all preinstalled.
Motherboard
TFT LCD screen
1.0 GB DDR2 memory module
Resistive type touch screen Preinstalled customizations may include the following.
Different DDR2 memory module
Hard disk drive Component installation is described in the following sections.
4.4 PREINSTALLATION AND CONFIGURATION STEPS
The following installation steps must be followed. Step 1: Unpack the flat panel PC Step 2: Set the jumper settings (not usually necessary) Step 3: Install HDD and CD drive Step 4: Mount the flat panel PC Step 5: Connect peripheral devices to the bottom panel of the flat panel PC Step 6: Configure the system
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
4.5 Remove the Back Cover
4.5.1 FPC6104 Back Cover Removal
The back cover is secured to the chassis with nine retention screws, six on the rear panel and three on the top panel (Figure 4-3). Remove the nine retention screws and lift the cover off the FPC6104.
.6 Jumper Settings
he jumper settings are all described in Section 4.6. During normal installation, these ettings should not be changed
.7 CompactFlash® Card Installationı
o install the a CF Type II card onto the FPC6104, please follow the steps below: tep 1: Locate the CF card socket. Place the FPC6104 on an anti-static pad with the
solder side facing up. Locate the CF card socket. tep 2: Remove the CF card socket cover. The socket cover is secured to the chassis
ith two retention screws. Remove the two retention screws to remove the socket over . ı
tep 3: Align the CF card. Make sure the CF card is properly aligned with the CF ocket.ı
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
Step 4: Insert the CF card. Gently insert the CF card into the socket making sure the socket pins are properly inserted into the socket. See Figure 4-4.
4.8 HDD Installation
4.8.1 FPD6104 HDD Installation
To install the HDD into the FPC6104, please follow the steps below: Step 1: Remove the back cover. See Section 4.5.2 above. Step 2: Remove the HDD bracket from the FPC6104. The HDD bracket is attached on
the FPC6104 with four retention screws inside the chassis (Figure 4-8). Remove the four retention screws and lift the bracket off the panel PC.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
Step 3: Attach the HDD bracket to the HDD. To do this, align the four retention screw holes in the HDD bracket with the retention screw holes on the bottom of the HDD. In­sert four retention screws into the HDD bracket. (Figure 4-9).
Step 4: Install the HDD into the FPC6104 by aligning the retention screw holes in the HDD bracket with the retention screw holes on the panel PC. Insert the four retention screws.
Step 5: Connect the SATA cable from the motherboard to the rear of HDD.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FPC 6104
10.4” Industrial Fanless Panel PC
4.10 Jumper Settings
NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper.
The following jumpers can be found on the motherboard installed in the FPC6104. Before the FPC6104 is installed, the jumpers must be set in accordance with the de­sired configuration. The jumpers on the FPC6104 motherboard are listed in Table 4-1.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
Loading...
+ 82 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use