How it Works
Acnodes
Loading...
FES 6831
User Manual
50 pgs5.75 Mb0

Acnodes FES 6831 User Manual

User Manual
FES-6831 Fanless Embedded Controller Intel Atom N270 1.6GHz
FES6831
FES6831
Processor Dual Gigabit Ethernet 2 COMs, Audio, CompactFlash
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
Safety & Warranty
1. Read these safety instructions carefully .
2. Keep this user's manual for later reference.
3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergent s for cleaning. Use a damp cloth.
4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible.
5. Keep this equipment away from humidity .
6. Put this equipment on a firm surface during installation. Dropping it or letting it fall could cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
10. All cautions and warnings on the equipment should be noted. 1 1. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by
transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or electrical shock.
13. Never open the equipment. For safety reasons, only qualified service personnel should open the equip ment.
14. If any of the following situations arises, get the equipment checked by service personnel: a. The power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment does not work well, or you cannot get it to work according to the user's manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
15. DO NOT LEA VE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERA­TURE IS BELOW -20°C (-4°F) OR ABOVE 60°C (140°F). IT MA Y DAMAGE THE EQUIPMENT.
FCC
This device complies with Part 15 FCC Rules. Operation is subject to the follow­ing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re­ceived including interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly re­placed. Replace only with the same or equivalent type recom­mended by the manufacturer. Dispose of used batteries accord­ing to the manufacturer's instructions and your local government's recycling or disposal directives.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
Contents
Chapter 1 General Information
1.1 Introduction............................................................................ 2
1.2 Features ............................................................................ ...3
1.3 Specifications ...................................................................... 4-6
Chapter 2 Hardware Installation
2.1 Dimension ............................................................................8
2.2 Hard Disk Drive (HDD) Installation.....................................9-12
2.3 SDRAM Installation..............................................................13-16
2.4 Wallmount Installation...........................................................16
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
2.5 DIN Rail Installation .............................................................17
2.6 COM Port 1 Connector .......................................................18
2.7 COM Port 2 Connector ........................................................18-19
Chapter 3 Award BIOS Setup
3.1 System T est and Initialization. ...........................................21
3.2 A ward BIOS Setup .............................................................22-23
Chapter 4 Driver Installation
4.1 Installation ............................................................................26-27
Appendix A Programming The Watchdog Timer
A.1 Programming ......................................................................29-32
A.2 ITE8781 Watchdog T imer Initial Program .......................33-37
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
Appendix B I/O Information
B.1 I/O Address Map ..................................................................39
B.2 1st MB Memory Address Map ...........................................40
B.3 IRQ Mapping Chart ..............................................................41
B.4 DMA Channel Assignments ................................................41
FES6831
FES6831
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
General Information
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
1.1 Introduction
The FES-6831 is an Embedded Control PC with Intel Atom Processor. The Anti-vibration and high tem­perature tolerances are the main design features of the FES-6831. This allows the FES-6831 to be in­stalled in a rugged transportation environment despite high ambient vibration and temperature.
In addition to the Atom CPU, the FES-6831 have DVI + VGA output for video output and DC power supply is commonly used in most vehicles and factory equipments, the FES-6831 can powered by a DC 9~30V input with low power consumption and high performance. Y ou can also choose an additional external AC power adapter for power redundancy purposes.
Transportation has become part of most people's life and forms a necessary p art of their lifestyle. From cars to trains to ships and airplanes, we rely on those tools a lot. The FES-6831 is designed to
improve transportation control and enhance the quality of our lives.
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
1.2 Features
o Fanless Design with Intel® Atom (N270) 1.6 GHz processor
o Mini PCI slots inside for expansion
o DC 9~30V input with Phoenix connector and optional external AC power adapter
o Front accessible USB port.
o CFD / Optional 2.5" HDD kit
o Dual GbE LAN/ 2 COM/ Audio
o Operating Temperature: -15°C ~55°C (-5°F~131°F)
o Anti-vibration up to 5 g rms / Anti-shock up to 100g (CFD)
o CE / FCC class A certificated
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
1.3 Specifications
System
o CPU: Intel® AtomTM N270 1.6GHz o Chipset: Intel® 945GSE + ICH7M o Memory: 200-pin DDRII SODIMM x 1, Max. 2GB (DDRII 400/533) o Expansion: Mini-card x 1 o VGA: VGA(DB-15) Connector o Display Interface: DVI-D x 1 o Ethernet: Intel® 82574L,10/100/1000Base-TX, RJ-45 x 2 o SSD: Type II Comp actFlash™ slot x 1 o Hard Disk Storage: Optional 2.5” Slim HDD kit o Serial Port: RS-232 x 1, RS-232/422/485 x 1 o Audio: Mic-in / Line-in / Line-out o USB: USB 2.0 x 4 o Watchdog T imer: Generates a time-out system reset o Power Supply: DC Input: 9V~30V AC Input: External Power Adapter (Optional) o System Control: Power on / off switch x 1; Reset button x 1 o Indicator: Power LED x 1/ HDD active LED x 1
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
Fanless Embedded Controller comes with Intel Atom N270 1.6GHz Processor
Mechanical and Environmental
o Construction: Aluminum Alloy chassis o Color: Dark Blue o Mounting: Wallmount (Default), DIN-Rail o Dimension: 8.35" (W) x 2.53" (H) x 4.21" (D) (212.15mm x 64.2mm x 107mm) o Net Weight: 4.75 lb (2.16 kg) o Gross Weight: 8.36 lb (3.8 kg) o Operation T emperature: 5°F~131°F (-15°C~55°C)(CFD) o Operation Humidity: 5~95% @ 40°C, non-condensing o Vibration: 5g rms / 5~500Hz / random operation (CompactFlash Disk);
1G rms / 5~500Hz / random operation (w/ Hard Disk Drive)
o Shock: 100g peak acceleration (1 1msec. duration)--CompactFlash Disk
20g peak acceleration (1 1msec. duration)--Hard Disk Drive
o EMC: CE/FCC Class A
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
FES6831
FES6831
661 Brea Canyon Rd., Suite 3 Walnut, CA 91789 tel: 909.598.7388, fax: 909.598.0218, www.acnodes.com
© Copyright 2009 Acnodes, Inc. All rights reserved. Product description and product specifications are subject to change without notice. For latest product information, please visit Acnodes’ web site at www.acnodes.com.
Loading...
+ 35 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use