Acme Engineering VQES User Manual

Acme Engineering and Manufacturing Corporation
P.O. Box 978, Muskogee, OK 74402 Telephone 918/682-7791 Fax 918/682-0134 www.acmefan.com acmefan@acmefan.com
Model: VQES Ceiling Ventilator Accessories
Polymeric Grille with Light & Night Light
Attractive grille with a complete light assembly and night light
socket. Lights not included. The tough Polymeric Resin grille is known for its durability and long life. Torsion spring clips make mounting quick and easy.
(Not available on VQ080ESBV and VQ50BVIW)
Aluminum and Steel Grilles
Low prole grilles are elegant and maintain simplicity. Available in 27 ga. aluminum (aluminum nish) or 22 ga. steel (white nish). Torsion
spring clips make mounting quick and easy.
Motion Sensor with Polymeric Grille
Low prole, motion sensing grille with LED motion indicator and LED
night light. Turns fan ON when motion sensor is activated. Fan runs for pre-determined time, adjustable from 3 to 30 minutes. The tough Polymeric Resin grille is known for its durability and long life. Torsion spring clips make mounting quick and easy.
(Not available on VQ080ESBV and VQ50BVIW)
Speed Control
Internally mountable speed control provides operation from 100% capacity down to 50% capacity for energy conservation and quieter
operation. Shipped loose for eld installation, mounted inside fan
with (2) ¼” screws (provided) using #2 Phillips screwdriver. Adjust speed with a #00 Phillips screwdriver. Easy plug-in connection for trouble-free installation.
(Mounted on Models VQ90-150ESM)
Humidity Sensor
Sophisticated humidity sensor that responds to increases in humidity levels at the ceiling. Fan runs for pre-determined time, adjustable
from 5 to 60 min. Shipped loose for eld installation, mounted inside
fan with (2) ¼” screws (provided) using #2 Phillips screwdriver. Adjust timer and sensitivity with a #00 Phillips screwdriver. Easy plug-in connection for trouble-free installation.
(Not available on VQ080ESBV and VQ50BVIW)
Bulb Adapter
Self locking E27 to GU24 bulb converter. Accepts all 24 base bulbs which meet California’s Title 24.
June 2013 B241B
LIMITED WARRANTY Acme Engineering and Manufacturing Corporation extends this limited warranty to the original purchaser and warrants that products described herein shall be free from original defects in workmanship and materials for two years from date of shipment (except for Acme’s exclusive duplex split pillow block bearings and shaft 5 years from shipment, belts one year from shipment, and polyethylene tubing at 90 days from shipping), provided same have been properly handled, stored, installed, serviced, maintained and operated. Refer to Form MS149 for complete limited warranty terms and conditions. This form is available to anyone at www.acmefan.com. The Company’s warranty is in lieu of all other warranties, express or implied, arising by law or otherwise, including without limitation the
implied warranties of merchantability and tness for
a particular purpose, which are hereby expressly disclaimed claimed and waived.
Acme products are designed and manufactured to provide reliable performance but they are not guaranteed to be 100% free of defects. Even reliable products will experience occasional failures and this possibility should be recognized by the Purchaser and End User. If these products are used in a life support ventilation system where failure could result in loss or injury, the Purchaser and End User should provide adequate back-up ventilation, supplementary natural ventilation or failure alarm system, or acknowledge willingness to accept the risk of such loss or injury.
WARNING DO NOT use in HAZARDOUS
ENVIRONMENTS where fan’s electrical system
could provide ignition to combustible or ammable materials unless unit is specically built for hazardous
environments. Comply with all local and national safety codes including the National Electrical Code (NEC) and National Fire Protection Act (NFPA). Guards must be installed when fan is within reach of
personnel or within eight (8) feet (2.5 m) of working level or when deemed advisable for safety.
DISCLAIMER The Company has made a diligent effort to illustrate and describe the products in this literature accurately; however, such illustrations and
descriptions are for the sole purpose of identication,
and do not express or imply a warranty that the
products are merchantable, or t for a particular
purpose.
INDEMNITY Purchaser acknowledges various warnings by the Company regarding the products and its installation and use. If the Company incurs any claims, lawsuits, settlements, or expenses (including attorney fees) for any loss, injury, death or property damage including, but not limited to, claims arising out of the Purchaser’s or any end user’s installation or use of the products, the Purchaser shall indemnify and hold the Company harmless.
Acme Engineering and Manufacturing Corporation
P.O. Box 978, Muskogee, OK 74402 Telephone 918/682-7791 Fax 918/682-0134 www.acmefan.com acmefan@acmefan.com
June 2013 B241B
Loading...