Ceiling & Cabinet Exhausters
Models VQ and VQL
Model VQ Ceiling and VQL In-Line fans are direct drive
centrifugal exhausters design for ultra-quiet operation.
Capacities up to 3868 CFM and up to 1 inch static
pressure. Perfect for offices, conference rooms,
bathrooms, hospital rooms - Anywhere quiet, high
capacity ventilation is needed.
Sound-absorbing acoustic
insulation completely lines
Quiet, built-in automatic
backdraft damper
located in duct
connector.
Duct connectors on
many models for easy
installations.
housing on many models to
further reduce sound levels.
Ceiling & Cabinet Exhausters
Heavy gauge
galvanized steel
housing.
Quite, low RPM motor permanently lubricated for
continuous operation.
Impact-resistant,
balanced centrifugal
blower wheel ensures
consistent performance.
8-way adjustable
mounting brackets
on many models
permit installation
flexibility.
Construction Features
Equipped with electrical terminal box and plug-in
•
disconnect inside housing
Wiring plate allows unit to be wired from outside
•
housing
Low RPM motors mounted on resilient mounts for
•
quiet, vibration-free operation
Motors designed for continuous operation and are
•
permanently lubricated
Acoustic insulation inside rugged, heavy gauge
•
galvanized steel housings (VQ50, VQ80, and some
in-line models not insulated)
May be installed in ceiling or wall
•
Balanced blower wheels for extremely low sound
•
levels
Attractive, low profile grilles standard on VQ models
•
May be ducted right angle, straight through or as an
•
in-line blower (VQ50 and VQ80 right angle only)
Quiet, built-in backdraft dampers (optional damper
•
kit for VQL2000 and VQL3500)
Specially designed
resilient motor mounts
help eliminate vibration.
DIMENSIONS
Fan Model A B C
VQ50 7.25 7.50 3.63 3.00 Round 5
VQ80 8.00 8.25 5.75 4.00 Round 7
VQ100, 150
VQL100, 150
VQ200, 250, 300
VQL200, 250, 300
VQ400, 500, 700
VQL400, 500, 700
VQ900, 1500
VQL900, 1500
VQL2000 14.68 38.00 14.63 7.75 x 33.75 89
VQL3500 16.75 45.75 16.75 9.75 x 41.375 144
Dimensions are shown in inches.
Weights are shown in pounds.
12.25 12.25 11.75 6.00 Round 5
12.25 12.25 11.75 8.00 Round 5
12.25 21.50 11.75 4.50 x 18.50 34
18.00 22.00 18.00 8 x 12 64
Duct
Connector
Est. Ship
Low-profile grille complements any
surroundings. Impact-resistant,
high-strength polymer or white enameled
steel, depending on model.
Acme Engineering & Manufacturing Corporation certifies
that the models shown herein are licensed to bear the
AMCA seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA
Publication 211 and AMCA Publication 311 and comply
with the requirements of the AMCA Certified Ratings
Wt.
Program.
Consult your Acme representative for availability.
U.L.705 Listed
PERFORMANCE DATA
Fan
Model
VQ50 Right Angle 52 3.9 49 4.3 47 4.4 42 4.6 29 5.5 1870 48 0.7
VQ80 Right Angle 89 3.9 81 3.8 80 3.8 68 3.8 36 3.9 1280 48 0.5
VQ100
VQ150
VQ200
VQ250
VQ300
VQ400
VQ500
VQ700
VQ900
VQ1500
Discharge
Right Angle 136 0.5 115 0.8 109 0.9 93 1.3 80 1.8 65 2.3 44 3.0 12 3.2 640 87 1.1
Straight Through 138 0.7 117 0.9 112 1.0 94 1.3 80 1.8 67 2.2 46 2.8 13 3.0 650 87 1.1
Right Angle 181 1.3 161 1.4 157 1.5 141 2.2 132 2.6 124 3.1 114 3.6 94 4.1 62 4.6 710 100 1.3
Straight Through 179 1.4 163 1.6 160 1.6 149 2.0 142 2.5 133 3.0 122 3.3 105 3.6 73 3.9 23 42 750 100 1.3
Right Angle 231 1.6 214 1.8 210 1.7 196 2.3 186 2.9 177 3.5 165 4.1 144 4.9 113 5.3 51 5.3 740 127 1.8
Straight Through 224 1.5 210 1.8 207 2.0 197 2.3 187 2.7 179 3.4 167 4.0 144 4.5 99 5.1 41 5.2 760 127 1.8
Right Angle 272 2.1 261 2.3 259 2.2 250 2.9 242 3.3 233 3.9 218 4.4 201 4.8 165 5.5 99 5.8 830 166 2.1
Straight Through 269 2.3 261 2.6 259 2.7 253 3.0 248 3.3 239 3.7 224 4.2 203 4.7 171 5.4 101 5.6 860 166 2.1
Right Angle 312 2.8 309 2.9 308 2.9 303 3.3 296 3.5 287 3.9 273 4.3 254 4.7 219 5.1 125 5.6 905 212 2.6
Straight Through 319 2.6 314 2.9 313 3.0 306 3.4 299 3.6 288 3.9 274 4.4 251 4.7 219 5.0 120 5.5 940 212 2.6
Right Angle 480 2.0 442 2.4 434 2.3 388 2.8 344 3.3 299 3.8 229 4.5 182 4.8 114 5.4 33 5.6 735 146 1.4
Straight Through 467 2.3 428 2.6 416 2.6 378 3.0 335 3.5 291 4.0 237 5.1 170 5.5 85 5.7 8 5.9 755 146 1.4
Right Angle 538 3.0 520 3.1 514 3.3 491 3.6 463 4.0 434 4.4 389 5.0 339 5.7 282 6.2 186 6.7 810 232 2.2
Straight Through 539 2.9 517 3.1 512 3.2 481 3.4 451 3.8 418 4.2 367 4.8 319 5.9 247 6.3 137 6.4 865 232 2.2
Right Angle 722 4.5 704 4.6 701 4.7 667 4.8 640 5.0 607 5.2 571 5.6 534 6.2 453 7.1 333 7.2 960 313 2.9
Straight Through 708 5.2 691 5.0 687 5.0 658 5.7 628 5.8 597 6.1 560 6.4 515 7.4 444 7.1 312 7.6 985 313 2.9
Right Angle 918 3.8 905 4.0 901 4.1 877 4.0 842 4.2 793 4.3 725 4.4 636 4.9 536 4.5 390 5.3 650 306 3.0
Straight Through 909 3.8 892 3.4 885 3.4 850 3.5 807 3.6 756 3.7 695 3.9 568 4.2 440 4.3 282 4.4 650 306 3.0
Right Angle 1578 8.6 1526 8.4 1513 8.4 1438 8.1 1371 7.5 1285 7.0 1198 6.7 1103 6.2 1000 5.8 816 5.8 955 468 5.0
Straight Through 1590 8.5 1519 8.4 1502 8.4 1423 8.1 1340 7.9 1259 7.5 1176 7.2 1069 7.1 954 6.9 689 6.5 955 468 5.0
.000" .100" .125" .250" .375" .500" .625" .750" .875" 1.00"
CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone
Static Pressures
Nominal
RPM
Watts
AMPS
@60HZ
Performance ratings include the effects of inlet grille and backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of
test. The sound ratings shown are loudness values in hemispherical sones at 1.5 m (5ft) in a hemispherical free field calculated per AMCA Standard
301. Values shown are for Installation Type B: Free inlet hemispherical sone levels. Performance certified is for Installations Type B: Free inlet,
Ducted outlet.
Ceiling & Cabinet Exhausters
PERFORMANCE DATA
Fan
Model
VQL100
VQL150
VQL200
VQL250
VQL300
VQL400
VQL500
VQL700
VQL900
VQL1500
Discharge
Right Angle 109 0.5 98 0.8 96 0.8 88 1.2 82 1.6 78 2.0 67 2.3 48 2.5 16 2.8 780 87 1.1
Straight Through 121 0.5 108 0.7 106 0.7 97 1.1 93 1.4 86 1.8 70 2.1 44 2.4 17 2.6 760 87 1.1
Right Angle 144 1.2 138 1.4 137 1.4 131 1.6 123 1.9 114 2.1 102 2.4 83 2.5 54 2.7 17 2.9 950 100 1.3
Straight Through 153 0.9 148 1.0 147 1.1 140 1.4 134 1.6 125 1.9 111 2.1 91 2.2 54 2.4 18 2.6 920 100 1.3
Right Angle 183 1.6 177 1.6 176 1.6 170 1.9 163 2.3 152 2.7 137 2.9 121 3.1 96 3.4 51 3.6 930 127 1.8
Straight Through 205 1.7 196 1.9 195 1.9 190 2.1 185 2.3 175 2.4 158 3.0 135 3.3 96 3.4 47 3.4 865 127 1.8
Right Angle 229 2.4 224 2.5 222 2.6 214 2.8 204 3.0 193 3.2 177 3.4 157 3.7 132 3.8 95 3.8 1115 166 2.1
Straight Through 248 2.0 245 2.3 245 2.3 241 2.6 235 2.8 224 3.2 208 3.4 183 3.6 141 3.9 84 3.8 1005 166 2.1
Right Angle 270 3.7 261 3.7 259 3.7 248 3.7 234 3.9 220 3.9 200 4.0 174 4.2 146 4.4 104 4.0 1285 212 2.6
Straight Through 300 2.9 294 3.0 293 3.1 285 3.3 274 3.4 259 3.5 243 3.6 214 3.7 168 4.0 113 3.9 1145 212 2.6
Right Angle 442 1.6 415 1.7 408 1.7 372 2.0 336 2.4 296 2.6 239 3.1 193 3.4 111 3.9 28 4.1 875 146 1.4
Straight Through 450 1.4 415 1.6 406 1.6 360 1.9 313 2.2 271 2.6 223 2.9 167 3.4 90 3.6 6 3.9 775 146 1.4
Right Angle 528 2.9 516 3.8 513 3.4 494 3.7 470 3.5 446 3.6 415 3.9 389 4.0 334 4.2 247 4.4 990 232 2.2
Straight Through 546 2.4 526 2.4 519 3.4 496 3.7 472 3.9 447 3.8 407 3.9 364 4.0 306 4.3 232 4.3 890 232 2.2
Right Angle 680 5.0 667 5.0 663 5.0 644 5.3 621 5.2 594 5.1 557 5.3 513 5.5 440 5.4 342 5.5 1205 313 2.9
Straight Through 704 3.6 686 3.8 681 3.7 656 3.9 631 4.0 604 4.2 575 4.3 533 4.4 480 4.7 412 5.0 1090 313 2.9
Right Angle 795 4.3 778 4.5 772 4.4 743 4.6 709 4.4 668 4.2 613 4.1 527 4.3 432 4.2 291 4.3 755 306 3.0
Straight Through 930 3.7 902 3.8 894 3.8 853 3.8 807 3.7 754 3.8 685 3.9 587 4.0 442 4.0 300 4.1 810 306 3.0
Right Angle 1160 7.9 1117 7.8 1106 7.9 1051 7.4 998 7.1 928 6.8 856 6.3 769 5.9 657 5.4 499 5.4 1020 468 5.0
Straight Through 1275 6.8 1228 6.8 1214 6.7 1152 6.5 1092 6.3 1029 6.0 958 6.0 871 6.0 764 6.0 631 6.1 1055 468 5.0
.000" .100" .125" .250" .375" .500" .625" .750" .875" 1.00"
CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone
Static Pressures
Nominal
RPM
Watts
AMPS
@60HZ
Performance ratings include the effects of backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The
sound ratings shown are loudness values in hemispherical sones at 1.5 m (5ft) in a hemispherical free field calculate per AMCA Standard 301. Values
shown are for Installation Type D: Ducted inlet hemispherical sone levels. Ratings do not include the effect of duct end correction. Performance
ratings include the effects of 18 feet of round inlet duct, if needed, a rectangular to round duct transition in the airstream. Performance certified is for
Installation Type D: Ducted inlet, Ducted outlet.
PERFORMANCE DATA
Fan
Model
VQL2000
VQL3500
Discharge
Right Angle 2070 11.1 1931 10.3 1898 10.1 1769 9.7 1609 9.4 1424 9.2 1314 8.5 795 7.0 288 6.7 1020 635 5.8
Straight Through 1891 10.3 1803 9.8 1791 9.4 1657 9.0 1508 8.6 1347 9.1 1165 8.9 808 7.0 284 6.7 965 590 5.8
Right Angle 3868 14.6 3714 14.2 3696 14.2 3537 13.3 3356 12.8 3168 12.5 2951 11.6 2671 11.4 2384 11.4 2005 13.4 1110 1205 5.4
Straight Through 3605 15.3 3498 14.8 3452 14.5 3278 14.1 3073 13.1 2893 12.8 2679 12.1 2429 11.8 2093 11.9 1693 10.8 1105 1204 5.4
.000" .100" .125" .250" .375" .500" .625" .750" .875" 1.00"
CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone
Static Pressures
Nominal
RPM
Watts
AMPS
@60HZ
Performance ratings do not include the effects of appurtenances (accessories). Speed (RPM) shown is nominal. Performance is based on actual
speed of test. The sound ratings shown are loudness values in hemispherical sones at 1.5 m (5ft) in a hemispherical free field calculated per AMCA
Standard 301. Values shown for Installation Type D: Ducted inlet hemispherical sone levels. Ratings do not include the effect of duct end correction.
Performance certified is for Installation Type D: Ducted inlet, Ducted outlet.
For more information on this product contact your sales support.
Model Description
57V 3 Amp. Speed Control-Ivory
57W 3 Amp. Speed Control-White
72V 6 Amp. Speed Control-Ivory
72W 6 Amp. Speed Control-White
75V 6 Amp. Speed Control-Ivory
Controls
Roof Caps
Wall
Caps
In-line
Adapt ers
Ceiling & Cabinet Exhausters
Dampers
Radiation
Metal Grille Kit
Brick
Vents
Duct
Transitions
Kit
Damper
Hangers
Vibration
60 Minute Timer-Ivory
59V
59W 60 Minute Timer-White
61V 15 Minute Timer-Ivory
61W 15 Minute Timer-White
634M Steel, 3.25” x 10” Up to 6” Rd. Black
634P Steel, 3.25” x 10” Up to 8” Rd. Black
644 Alum., 3.25” x 10” Up to 8” Rd.
611 Flat, Alum., Up to 8” Rd.
611CM Alum., For Curb mount, Up to 8” Rd.
612 Flat, Alum., Up to 12” Rd.
612CM Alum., For Curb Mount, Up to 12” Rd.
437 Steel, up to 10” Rd.
636 Steel, up to 4” Rd.
641 Aluminum, 6” Round
885AL Aluminum, 3"- 4" Round
643 Aluminum, 8” Round
613 Aluminum, 12” Round
961L In-Line Adapter Kit-6” Round
981L In-Line Adapter Kit-8” Round
982L In-Line Adapter Kit-4.5” x 18.5”
983L In-Line Adapter Kit-8” x 12”
SR1 Ceiling Radiation Damper
SR2 Ceiling Radiation Damper
SR3 Ceiling Radiation Damper
MG1 Metal Grille Kit
MG2 Metal Grille Kit
G102 White Enameled 16.25” x 39.625”
G103 White Enameled 18.375” x 47.255”
BEX 808 Extruded Aluminum
BEX128 Extruded Aluminum
BEX157 Extruded Aluminum
423 4.5” x 18.5” to 10” Round
T81212 8” x 12” to 12” Round
D100 Twin Damper Flaps & Mntg Hdw.
D101 Twin Damper Flaps & Mntg Hdw.
VDH100 Set of Four
VDH104 Set of Four
Accessories
Accessory Model VQ Model VQL
VQ100
VQ150
VQ200
VQ250
VQ300
VQ400
VQ700 VQ900 VQ1500
VQ500
VQ50
VQ80
••••• • • •
••••• • • •
•• • • •
•• • • •
••••••• • • • • •
••••••• • • • • •
••••••• • • • • •
••••••• • • • • •
••
•• • •
•• • •
•• • •
•• • •
•••• • • •
•••• • • •
•• •
•
••
•
••
•••• • • •
•
•
••
••
••
••
••
••
•
••
•
••
•• •
•• • •
••••• • • • • • •
VQL100
VQL150
VQL200
VQL250
VQL300
VQL400
VQL500
VQL900 VQL1500 VQL2000 VQL3500
VQL700
•
•
•
•
•
••
WALL CONTROLS
Rotary dial for variable selection of
fan speed and sound level
WALL CAPS
Aluminum - natural finish
Built-in backdraft damper
ROOF CAPS RADIATION DAMPERS
Built-in birdscreen
U.L. Listed - classified for use in
1, 2, or 3 hour fire-rated ceiling
TERMS AND CONDITIONS OF SALE
ACCEPTANCE All orders and sales are subject to
written approval and acceptance by an executive offi
cer of Acme Engineering & Manufacturing Corporation
at Muskogee, Oklahoma, (the "Company") and are not
binding on the Company until so approved.
DELIVERY All shipping and delivery dates are esti
mated only. No delays in delivery will subject the
Company to any costs, damages or fees for late deliv
ery. Delivery of the products herein specified shall be
made F.O.B. point of shipment, unless otherwise
stated. The Company shall not be liable for delay due
to causes beyond its reasonable control, such as Acts
of God, acts of the purchaser, acts of civil or military
authorities, priorities, fires, strikes, floods, epidemics,
war, riots, delays in transportation, car shortages, and
inability, due to reasons beyond its reasonable control,
to obtain necessary labor, material, or manufacturing
facilities. In the event of such a delay, the date of deliv
ery shall be extended for a period equal to the time lost
by reason of the delay.
TERMS OF PAYMENT If, in the judgment of the Com
pany, the financial condition of the purchaser at any
time does not justify continuation of manufacture or
shipment on the terms of payment specified, the Com
pany may require full or partial payment in advance.
Pro rata payments shall become due as shipments are
made. Each shipment or delivery shall constitute a
separate sale, and the default of any shipment or delivery shall constitute a separate sale, and the default of
any shipment or delivery shall not vitiate the contract
as to other shipments or deliveries.
SALES AND SIMILAR TAXES The Company’s prices
do not include sales, use, excise, or similar taxes.
Consequently, in addition to the price specified herein,
the amount of any present or future sales, use, excise,
or other similar tax applicable to the sale of the product
herein shall be paid by the Purchaser, or in lieu thereof
WARNING Acme products are designed and manufactured to provide reliable performance but they are not guaranteed to be 100% free of defects. Even reliable products will
experience occasional failures and this possibility should be recognized by the Purchaser and all End Users. If these products are used in a life support ventilation system
where failure could result in loss or injury, the Purchaser and all End Users should provide adequate back-up ventilation, supplementary natural ventilation or failure alarm system, or acknowledge willingness to accept the risk of such loss or injury.
WARNING DO NOT use in HAZARDOUS ENVIRONMENTS where fan’s electrical system could provide ignition to combustible or flammable materials unless unit is specifically built for hazardous environments. Comply with all local and national safety codes including the National Electrical Code (NEC) and National Fire Protection Act (NFPA).
CAUTION Guards must be installed when fan is within reach of personnel or within eight (8) feet (2.5 m) of working level or when deemed advisable for safety.
DISCLAIMER The Company has made a diligent effort to illustrate and describe the products accurately in all Company literature; however such illustrations and descriptions
are for the sole purpose of identification and do not express or imply any warranty.
the Purchaser shall provide the Company with a tax
-
exemption certificate acceptable to the taxing authori
ties.
CANCELLATION Any contract resulting from the Pur
chaser’s order may be canceled by the Purchaser only
-
by negotiations and upon payments of reasonable can
cellation charges which will take into account expenses
-
already incurred and commitments made by the Com
pany.
DESIGN CHANGES The Company reserves the right
to make changes in design, improvements and addi
tions in and to its products any time without imposing
any liability or obligations to itself to apply or install the
same in any product manufactured by it.
TITLE The title and right of possession of the products
sold herein shall remain with the Company and such
products shall remain personal property until all
payments herein (including deferred payments whether
evidenced by notes or otherwise) shall have been
made in full in cash and the Purchaser agrees to do all
acts necessary to perfect and maintain such right and
title in the Company.
PRICE ADJUSTMENTS Prices are subject to change
upon notice by the Company. Prices on existing or
ders are subject to surcharges in the event of cost in
creases of metals and transportation. All complete
component accessory material manufactured by others
and furnished with the Company’s products such as
motors, drives, vibration equipment, controls or other
completely assembled component structures, are subject to adjustment to the price at time of shipment regardless of the date of original order entry.
SAFETY ACCESSORIES The Company manufactures
products designed to serve multiple applications and
offers a wide range of safety equipment, including
guards and other devices, as may be required to meet
customer specifications. Without exception, the Com
pany recommends that all orders include applicable
safety devices. Products ordered without applicable
safety devices is clearly the responsibility of the Pur
chaser. Further, the Purchaser warrants that it has de
termined and acquired any and all safety devices re
quired for products sold by the Company. Weather
covers and guards for motor and V-belt drives, cou
plings, shafts and bearings, along with inlet and outlet
screens, are optional accessories noted in the price
list.
GOVERNING LAW The rights, obligations and reme
dies of Purchaser and the Company, the interpretation
of these terms and conditions and the sale of products
by the Company shall be governed by Oklahoma law,
without regard to any principles of conflict of laws.
ARBITRATION Any dispute arising under or in con
nection with these terms and conditions or the sale of
products shall be settled by binding arbitration admin
istered by the American Arbitration Association under
its Commercial Arbitration Rules, and judgment on the
award rendered by the arbitrator may be entered in
any court having jurisdiction thereof. The dispute shall
be resolved by one neutral arbitrator who shall have no
affiliation with either Purchaser or the Company and
shall be selected by the American Arbitration Association office in Dallas, Texas. The arbitration proceedings shall be held in Muskogee, Oklahoma.
APPLICABLE DOCUMENTS The
tween the Company and the Purchaser relating to the
products includes these terms and conditions of sale,
any applicable installation and maintenance instructions provided by the Company and any terms appearing on the Company’s quotation, sales order acknowledgment and invoice.
agreement be-
-
-
-
-
-
-
-
-
WARRANTY AND DISCLAIMER: the Company extends this limited warranty to the original purchaser
and warrants that products supplied by the Company,
shall be free from original defects in workmanship and
materials for two years from date of shipment (except
for the warranty periods noted for products listed below), provided same have been properly handled,
stored, installed, serviced, maintained and operated.
This warranty shall not apply to products which have
been altered or repaired without the Company’s express authorization, or altered or repaired in any way
so as, in the Company’s judgment, to affect its performance or reliability, nor which have been improperly
installed or subjected to misuse, negligence, or accident, or incorrectly used in combination with other substances. The Purchaser assumes all risks and liability
for results of use of all products.
Evaporative cooling pads are warranted to be free of
defects in materials and workmanship for a period of
two years from date of shipment provided same have
been properly handled, stored, installed, serviced,
maintained and operated; and further, not subjected to
excessive heat, corrosive agents or chemicals, or mechanical abuse that may cause tearing, crushing or undue deterioration, nor used on a system or in a manner
other than that for which it was designed as explained
in the product literature.
The following products are warranted to be free of de
fects in materials and workmanship for the periods
shown from date of shipment: Acme’s exclusive du
plex split pillow block bearings and shaft five years,
belts one year, Polyethylene tubing 90 days, AIR40
Heater warranty one year, AIR40 Emitter warranty
three years and DDP fan lifetime warranty on its pro
peller, cone, and housing.
LIMITATION OF REMEDY AND DAMAGES: All
claims under this warranty must be made in writing and
delivered to P. O. Box 978, Muskogee, Oklahoma,
74402, within 15 days after discovery of the defect and
prior to the expiration of two years from the date of
shipment by the Company of the product claimed de
fective, and Purchaser shall be barred from any
remedy if Purchaser fails to make such claim within
such period.
Within 30 days after receipt of a timely claim, the Com
pany shall have the option either to inspect the product
while in Purchaser's possession or to request Pur
chaser to return the product to the Company at Pur
LIMITED WARRANTY
chaser's expense for inspection by the Company. The
Company shall replace, or at its option repair, free of
charge, any product it determines to be defective, and
it shall ship the repaired or replacement product to
Purchaser F.O.B. point of shipment; provided, however, if circumstances are such as in the Company’s
judgment to prohibit repair or replacement to remedy
the warranted defects, the Purchaser's sole and exclusive remedy shall be a refund to the Purchaser of any
part of the invoice price, paid to the Company, for the
defective product or part.
The Company is not responsible for the cost of removal of the defective product or part, damages due to
removal, or any expenses incurred in shipping the
product or part to or from the Company’s plant, or the
installation of the repaired or replaced product or part.
The warranties set forth above do not apply to any
components, accessories, parts or attachments manufactured by other manufacturers; such being subject to
the manufacturer’s warranty, if any. To the extent not
prohibited by the manufacturer’s warranty, the Company shall pass through to Purchaser such manufacturer’s warranty.
THE COMPANY’S WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
ARISING BY LAW OR OTHERWISE, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PAR
TICULAR PURPOSE, WHICH ARE HEREBY EX
PRESSLY DISCLAIMED AND WAIVED. THIS WAR
RANTY CONSTITUTES THE COMPANY’S SOLE
AND EXCLUSIVE WARRANTY FOR DEFECTIVE
GOODS AND PURCHASER’S SOLE AND EXCLU
SIVE REMEDY FOR DEFECTIVE PRODUCTS.
No employee, agent, dealer, or other person is autho
rized to give any warranties on behalf of the Company
or to assume for the Company any other liability in
connection with any of its products except in writing
and signed by an officer of the Company.
-
REPLACEMENT PARTS If replacement parts are or
dered, purchaser warrants that the original compo
nents in which these replacement parts will be placed
are in satisfactory working condition, and when said re
placement parts are installed, the resultant installation
will operate in a safe manner, at speeds and tempera
tures for which the original product was purchased.
-
-
TECHNICAL ADVICE AND RECOMMENDATIONS,
DISCLAIMER: Notwithstanding any past practice or
dealings or any custom of the trade, sales shall not include the furnishing of technical advice or assistance
or system design. Any such assistance shall be at the
Company’s sole option and may be subject to additional charge.
The Company assumes no obligation or liability on ac
count
of any recommendations, opinions or advice as
to the choice, installation or use of products. Any such
recommendations, opinions or advice are given and
shall be accepted at Purchaser's and End User's risk
and shall not constitute any warranty or guarantee of
such products or their performance.
LIMITATION OF LIABILITY The cumulative liability of
the Company to the Purchaser and any other persons
for all claims in any way relating to or arising out of the
products, including, but not limited to, any cause of action sounding in contract, tort, or strict liability, shall not
exceed the total amount of the purchase price paid for
those products which are the subject of any such
claim. This limitation of liability is intended to apply
without regard to whether other provisions of this
agreement have been breached or have proven ineffective even if the Company has been advised of the
possibility of such claims or demands. In no event
shall the Company be liable to the Purchaser or any
other person for any loss of profits or any incidental,
special, exemplary, or consequential damages for any
claims or demands brought by the Purchaser or such
other persons.
INDEMNITY The Company’s maximum liability to Pur
-
chaser and to any end user is as set forth above. The
Company makes no warranty to anyone for any prod
ucts not manufactured by the Company and shall have
no liability for any use or installation of any products
(whether manufactured by the Company or other man
ufacturers) not specifically authorized by this sale.
Purchaser acknowledges various warnings by the
Company regarding the products and its installation
and use. If the Company incurs any claims, lawsuits,
settlements, or expenses (including attorney fees) for
any loss, injury, death or property damage including,
but not limited to, claims arising out of the Purchaser’s
or any end user’s installation or use of the products,
the Purchaser shall indemnify and hold the Company
harmless.
-
-
-
-
Loading...