Acme Engineering PRN080-1 User Manual

Direct Drive Centrifugal Roof Exhauster

Model PRN

Model PRN direct drive fans are centrifugal power roof ventila tors designed for exhausting clean air. Capacities up to 2770 CFM and up to 1 inch static pressure. The PRN is a downblast exhauster suitable for all types of commercial and institutional buildings such as schools, hospitals, office buildings, and retail

stores

Centrifugal Exhausters

Construction Features

Housing

Hoods constructed of heavy gauge aluminum, die formed with

•

rolled bead for strength Curb base and inlet are one piece with continuous welded cor

•

ners Steel fasteners are zinc dichromate plated

•

Heavy gauge galvanized wire birdscreen

•

Heavy gauge corner support brackets transmit motor and im

•

peller weight to curb base Conduit post for ease of electrical wiring

•

Airfoil Centrifugal Wheel

Aluminum construction with backward curved hollow airfoil

•

blades Non-overloading design for safe operation

•

Precision balanced for smooth vibration free operation

•

Motor

• Continuous duty motors located outside the

airstream

•

Motor compartment is ventilated by a “forced air” cooling system

•

Factory wired with polarized disconnect plug (except explosion resistant motors)

DIMENSIONS

Est.

Fan

Model

PRN080 13.50 9.00 18.25 — 9 x 9 22 24 AR8.75 C12 3 AMP PRN100 16.00 13.25 21.12 3.81 11.5 x 11.5 23 25 AR11 C14.5 3 AMP PRN110 16.00 13.25 21.12 3.81 11.5 x 11.5 24 26 AR11 C14.5 3 AMP PRN118 21.00 16.38 27.75 4.81 16.5 x 16.5 37 42 AR16 C19.5 6 AMP PRN126 21.00 16.38 27.75 4.81 16.5 x 16.5 38 44 AR16 C19.5 6 AMP PRN135 21.00 16.38 27.75 4.81 16.5 x 16.5 44 51 AR16 C19.5 6 AMP PRN145 21.00 16.38 27.75 4.81 16.5 x 16.5 58 64 AR16 C19.5 6 AMP PRN163 24.00 18.12 31.63 5.56 19.5 x 19.5 66 75 AR18 C22.5 6 AMP PRN171 24.00 18.12 31.63 5.56 19.5 x 19.5 75 83 AR18 C22.5 6 AMP

Dimensions are shown in inches. Weights are shown in pounds. *Recommended maximum.

‡ Please contact your local representative for correct rated sizing for hurricane construction.

ABCE

Roof

Opening*

‡

Unit

Wt.

Est.

Ship

Wt.

Damper

Model

Curb

Model

SSC

‡

Options/Accessories

•

Roof Curbs

•

Dampers

•

Solid State Speed Controllers

•

Coatings

•

Disconnect Switch

•

Aluminum Birdscreen

Acme Engineering & Manufacturing Corporation certifies that the models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

U.L. 705 Listed CSA Certified

Consult your Acme representative for availability.

Page 6

PERFORMANCE DATA

Fan

Model

PRN080-1 1/10 1725 4600 337 15.1 299 8.3 261 8.4 222 10.0 182 10.8 .050 PRN080-2 1/10 1725 4600 450 7.2 396 7.0 336 6.8 255 7.1 171 7.4 .060 PRN080-3 1/10 1725 4600 580 8.1 496 8.2 428 7.8 352 8.3 254 8.8 .060

PRN100 1/10

PRN110 1/10

PRN118E 1/4

PRN126E 1/4

PRN135G 1/2

PRN145G 1/2

PRN163F 1/3 1100 4694 2448 15.5 2259 15.1 2062 14.6 1851 14.3 1587 14.1 902 13.4 .254 PRN171F 1/3 1075 4813 2770 15.0 2610 14.0 2430 14.0 2220 14.0 1960 13.0 1300 12.0 .328

HP RPM

1550 4058 770 6.8 690 6.2 610 5.8 520 5.3 380 5.3 1300 3403 650 5.3 550 4.6 450 4.0 280 4.0 1050 2749 520 3.8 410 6.0 210 3.0

1550 4464 1090 8.7 990 8.2 890 7.6 780 8.5 650 8.0 210 8.0 1300 3744 910 6.9 790 6.2 670 6.5 510 6.1 270 6.1 1050 3024 740 5.1 590 4.2 400 4.4

1725 5329 1582 12.1 1489 11.9 1397 9.9 1305 9.8 1195 10.2 932 9.3 578 8.3 1300 4016 1192 7.0 1069 6.6 942 6.1 780 6.0 571 6.0

1100 3398 1009 4.8 864 4.6 691 4.1 442 4.0

1625 5361 1760 13.0 1670 13.0 1560 12.0 1450 12.0 1320 12.0 1040 12.0 680 12.0

1050 3464 1140 7.3 980 6.5 790 6.6 540 6.4 150 6.4 1725 5743 2160 15.9 2070 15.7 1970 15.0 1860 14.7 1740 14.4 1460 14.2 1090 13.2

1050 3711 1390 8.7 1250 8.2 1060 7.7 810 6.8 430 6.8 1625 6168 2540 14.9 2420 15.2 2300 14.5 2180 14.6 2060 14.3 1780 13.9 1440 14.2

1050 3986 1640 8.2 1460 7.8 1270 7.6 1030 7.4 710 7.2

Tip

Spd.

860 2251 430 2.6 270 1.8

860 2477 600 3.7 420 2.7

860 2657 789 3.1 594 3.0 284 2.4

.000" .125" .250" .375" .500" .750" 1.000"

CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone

CFM and Sones vs. Static Pressure

Max. BHP

.067

.100

.182

.2531300 4289 1410 10.0 1290 9.3 1150 9.0 980 9.0 800 8.5 270 8.5

.3371300 4594 1730 11.6 1610 11.1 1480 10.8 1320 10.2 1140 9.9 580 9.4

.4531300 4594 2030 10.8 1880 10.8 1730 10.7 1580 10.1 1400 10.7 920 10.1

Centrifugal Exhausters

Performance certified is for Installation Type A: Free Inlet, Free Outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in spherical sones at 1.5 m (5 ft) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for Installation Type A: Free Inlet spherical sone levels. Maximum RPM shown obtained with the standard one speed motor, for all other RPM ’s use solid state controller (SSC). The brake horsepower capability of an exhauster motor is dependent on the degree of cooling the motor receives from the air moving through the motor. The motor loading beyond the motor nameplate rating does not overheat the motor and is in accordance with the motor manufacturer 's recommendations. It is therefore not detrimental to the motor and is economically desirable.

For more information on this product contact your sales support.

Page 7