Models EC and ECH are low silhouette belt drive propeller fans
for exhaust or supply ventilation. Capacities up to 74,200 CFM
and up to 7/8 inch static pressure. EC and ECH fans are
designed for high capacity general ventilation. Typical
applications include a wide range of commercial, industrial, and
institutional facilities such as schools, hospitals, prisons, and
assembly areas.
Construction Features
Housing
Hood and framework constructed of heavy gauge aluminum
•
Bolted-on hood provides easy access to motor drive
•
compartment
Large hood provides full perimeter opening for efficient air flow
•
and weather protection
Steel fasteners are zinc dichromate plated
•
Welded tubular steel frame supports motor, propeller and drive
•
assembly
Heavy gauge galvanized wire birdscreen
•
Aluminum Propeller
All welded heavy gauge aluminum propeller
•
Non-overloading design for safe operation
•
Precision balanced for smooth vibration free operation
•
Disconnect Switch
Mounted over knock-out in orifice plate allowing convenient
•
wiring to power source
Explosion proof switch separate when explosion proof motors
•
are selected.
Bearings
Permanently lubricated in an Acme D.S. pillow block housing
•
Bearings are resiliently mounted in neoprene rings
•
Rated at L50life of 200,000 hours
•
5 year limited warranty on Acme D.S. pillow block bearings
n For Supply Units with Filter Frames.
Dimensions are shown in inches.
*Recommended maximum.
ABBnCCnE
Acme Engineering & Manufacturing Corporation certifies
that the models shown herein are licensed to bear the
AMCA seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA
Publication 211 and AMCA Publication 311 and comply
with the requirements of the AMCA Certified Ratings
Program.
DIMENSIONS
Roof
Opening*
Damper
Model
Curb
Model
Drive Assembly
•
Cast iron drives sized for 150% of drive horsepower
•
Static free, oil and heat resistant belts
Motors
•
Continuous duty motors located in the airstream for cooler
operation and longer life under continuous duty
Options/Accessories
•
Roof Curbs
•
Dampers
•
Coatings
•
Filters, vertical and horizontal
•
Steel propeller
U.L. 705 ListedCSA Certified
Consult your Acme representative for availability.
The brake horsepower capability of a fan motor is dependent on the degree of
cooling the motor receives from the moving air stream over the motor. The
motor loading beyond the motor name plate rating on Acme built fans does not
overheat the motor and is within NEMA recommended limits. It is therefore not
detrimental to the motor and is economically desirable.
Performance certified is for Installation Type A: Free inlet, Free Outlet
Power Rating (BHP) does not include transmission losses.
Performance ratings do not include the effects of appurtenances (accessories).
The sound ratings shown for Models EC and ECH are loudness values in
hemispherical sones at 1.5 m (5 ft) in a hemispherical free field calculated per
AMCA Standard 301. Values shown are for Installation Type A: Free Inlet
hemispherical sone levels.
The sound ratings shown for Models EC-S and ECH-S are loudness values in
fan sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA
Standard 301. Values shown are for Installation Type A: Free Outlet
hemispherical sone levels.
Performance certified is for Installation Type A: Free inlet, Free Outlet
Power Rating (BHP) does not include transmission losses.
Performance ratings do not include the effects of appurtenances (accessories).
The brake horsepower capability of a fan motor is dependent on the degree of
cooling the motor receives from the moving air stream over the motor. The
motor loading beyond the motor name plate rating on Acme built fans does not
overheat the motor and is within NEMA recommended limits. It is therefore not
detrimental to the motor and is economically desirable.
For more information on this product contact your sales support.
Page 69
The sound ratings shown for Models EC and ECH are loudness values in fan
sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA
Standard 301. Values shown are for Installation Type A: Free Inlet
hemispherical sone levels.
The sound ratings shown for Models EC-S and ECH-S are loudness values in
fan sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA
Standard 301. Values shown are for Installation Type A: Free Outlet
hemispherical sone levels
.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.