Acme Engineering DXP60L User Manual

Est. 1938

NEW

ACME ENGINEERING &
MANUFACTURING CORP.

P.O. Box 978 • Muskogee, OK 74402 • 918/682-7791
Fax [phone] • www.acmeag.com

Think ACME

omposite materials are used daily by our military

C

and law enforcement ofcers in personal protection

devices. The ACME DXP60 fan was designed with

longevity as the goal using the same composite
polymer materials. The Durable housing is injection
molded from a proprietary blend of Polymers. These
polymers, combined with a precision designed injection
mold, allow for a very accurate and repeatable t of
parts as well as repeatable frameout dimensions.
The surface nish of this material is much better
than standard berglass housings, allowing for better
airow and an aesthetically pleasing look. The blend of
polymers is also impervious to most chemicals used in

normal agriculture environments. We also designed the
DXP60 to use a more rigid “X-frame” design. This

design not only creates exceptional strength, but

Notable Features:

• DXP is a durable military-grade polymer material that is UV
and Chemical resistant

through our mounting

bracket system,

Acme’s DXP60
X-frame ties directly
into the building
structure. This

X-frame, coupled
with the precision
injection molding of
this housing, allows

for a very uniform

blade tip clearance
creating repeatable
performance time after time.

15% post-industrial recycled content.

Made from

• Injection molded housing for repeatable, precision t of parts

• Precision t parts allow for accurate tip clearance

• Stable polymer blend material has less shrinkage than

berglass

• X-frame has superior strength and ties load into building
structure

• Bottom motor location for easy access when installed

• One piece roto-molded polyethylene cone

• The DXP fan has been independently wind tunnel tested at

BESS labs

• Captured bearing design allows us to offer a 5 year shaft & bearing warranty

• American made UL certied motors are used on the DXP60 fan

• MADE IN AMERICA – this fan is proudly manufactured in Muskogee, Oklahoma

• Aerodynamic and structural components precision fabricated on the Mazak Fiber optic

laser as shown below